1. Okwu mmalite
This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.
2. Ntuziaka nchekwa dị mkpa
- Isi mmalite ike: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
- Igwe ikuku: Hụ na ikuku na-abata nke ọma. Ekpuchila oghere ikuku.
- Mmiri na mmiri: Do not expose this appliance to rain or moisture. Do not place objects filled with liquids on the apparatus.
- Ije ozi: Nye ndị ọrụ ọrụ ruru eru ọrụ niile. Anwala ịrụzi ngwaahịa a n'onwe gị.
- Gịnị: Use only high-quality, shielded cables for all audio connections to prevent interference.
- Nda ala: Ngwaahịa a ga-agbanyerịrị n'ala.
- Nhicha: Jiri akwa kpọrọ nkụ hichaa naanị.
3. Ntuziaka Nhazi
3.1 Mwepu na nyocha
Jiri nlezianya bupụ ihe ahụ amplifier and inspect it for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 Ntinye
The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 Njikọ
- Njikọ ike: Connect the supplied AC power cord to the amplifier's power inlet and then to a suitable grounded power outlet.
- Njikọ ntinye: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
- Mmepụta njikọ: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Figure 1: Front panel of the Behringer NX6000D Power Amplifier, showing controls and display.
Ọgụgụ 2: N'akuku view of the Behringer NX6000D Power Amplifier, highlighting its compact design.
4. Ntuziaka ọrụ
4.1 Gbanyụọ/ gbanyụọ
Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.
4.2 Njikwa ihu ihu
- Level Controls (CH A, CH B): Adjust the output level for each channel.
- SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
- Ngosipụta LCD: Shows current settings, DSP parameters, and status.
- Bọtịnụ SETUP: Accesses the main setup menu.
- PROCESS Button: Accesses DSP processing parameters.
- Mpempe koodu: Navigates menus and adjusts parameter values.
- Bọtịnụ ọpụpụ: Returns to the previous menu or main screen.
4.3 DSP Functionality
The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:
- igbu oge: Adjust signal delay for speaker alignment.
- Ibealaoke Chukwukeziri Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
- EQ: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
- Dynamics Processing: Apply compression or limiting to control dynamic range.
- Ntọala nchekwa: Lock settings to prevent unauthorized changes.
Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.
5. Nlekọta
- Nhicha: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Igwe ikuku: Regularly check that the ventilation openings are clear of dust and debris.
- Njikọ eriri: Na-elele njikọ eriri niile mgbe niile maka na ha dabara nke ọma na ihe ịrịba ama nke iyi.
- Nchekwa: If storing the unit for an extended period, ensure it is in a dry, dust-free environment.
6. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ike | Power cord disconnected; faulty outlet; internal fuse. | Check power cord connection; try a different outlet; contact service if fuse is suspected. |
| Enweghị mmepụta ụda | Input/output cables incorrect; level controls too low; protection mode active. | Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit). |
| Ụda agbagọ | Input signal too high; speaker impedance mismatch; faulty speaker. | Reduce input signal level; verify speaker impedance matches amplifier; test with different speakers. |
| Otu na-ekpo oke ọkụ | Blocked ventilation; excessive load. | Ensure clear airflow around the unit; reduce output level or load. |
7. Nka na ụzụ nkọwa
- Ike mmepụta: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
- Arọ: Less than 13.2 lbs / 6.0 kg
- Akụkụ (H x W x D): Ihe dịka 3.7 x 19.02 x 12.44 sentimita (94 x 483 x 316 mm)
- DSP: High-performance DSP with 24-bit/96 kHz converters
- DSP Features: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
- Njikọ ntinye: 2 x XLR/TRS combo jacks
- Njikọ mmepụta: 2 x SpeakON connectors
- Ịnye ọkụ: Ultra-efficient switch-mode power supply
- Na-ajụ oyi: Revolutionary cool-running high-density Class-D technology
- Ihe: Ọla
- Agba: Nwa
8. Akwụkwọ ikike na nkwado
For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.
8.1 Nkwado nka na ụzụ
If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.
Behringer Official Websaịtị: www.butubue.com
