Plugable HDMI Video Capture Card (USBC-CAP60) Instruction Manual

1. Okwu mmalite

The Plugable HDMI Video Capture Card (USBC-CAP60) is designed for high-quality video capture and streaming. It supports recording and live streaming at 1080p resolution and 60 frames per second, featuring an HDMI pass-through for zero-latency monitoring. This device is compatible with a wide range of operating systems including Windows, macOS, and Linux, and integrates seamlessly with popular streaming software like OBS, Streamlabs OBS, and Xsplit. It is an ideal solution for capturing gameplay, presentations, or any HDMI video source.

Image: The Plugable HDMI Video Capture Card, highlighting its USB 3.0 and USB-C connectivity for recording and streaming live content.

2. Nhazi

Follow these steps to set up your Plugable HDMI Video Capture Card:

1. Jikọọ Isi mmalite vidiyo: Connect your HDMI video source (e.g., game console, DSLR camera, camcorder) to the HDMI n'ime ọdụ ụgbọ mmiri na kaadị nwude site na iji eriri HDMI.
2. Connect Display (Optional): For real-time monitoring without latency, connect a display (e.g., TV, monitor) to the HDMI pụọ port on the capture card using another HDMI cable.
3. Jikọọ na Kọmputa: Connect the capture card to your computer using either the provided USB 3.0 (USB-A to USB-A) or USB-C (USB-C to USB-A) cable. The card is plug-and-play and typically does not require additional drivers for Windows, macOS, or Linux.
4. Nhazi ngwanrọ: Open your preferred streaming or recording software (e.g., OBS Studio, Streamlabs OBS, Xsplit). Add the capture card as a video source. It will usually appear as "FHD Capture" or a similar device name.

Image: The Plugable NIX Capture Card connected to a laptop via USB and an external monitor via HDMI pass-through, illustrating a typical setup.

3. Ntuziaka ọrụ

The Plugable HDMI Video Capture Card is designed for ease of use with various applications:

• Streaming Software: Once connected, the capture card will appear as a webcam or video input device in applications like OBS Studio, Streamlabs OBS, Xsplit, Zoom, and Google Meet. Select it as your video source to begin streaming or recording.
• Mkpebi na Ọnụ Ọgụgụ: The card supports up to 1080p at 60 frames per second. Ensure your software settings match these capabilities for optimal performance.
• Ntinye HDMI-Site na: Utilize the HDMI OUT port to connect to a separate display for real-time, zero-latency monitoring of your video source while capturing or streaming.
• HDCP Content: Ihe ndetu dị mkpa: This capture card does not support recording from HDCP-enabled sources. This includes most Blu-ray players, set-top boxes, older consoles with HDMI output (e.g., PlayStation 3, Xbox 360), and streaming devices. For PlayStation 4, HDCP must be manually disabled in its system settings to allow capture. Attempting to capture HDCP-protected content will result in a blank screen.

Image: The Plugable NIX Capture Card shown with logos of compatible platforms like OBS, Zoom, and Google Meet.

4. Nlekọta

To ensure the longevity and optimal performance of your capture card:

• Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa mpụta nke ngwaọrụ ahụ. Zere ihe nhicha mmiri ma ọ bụ ihe mgbaze.
• Nchekwa: Chekwaa ngwaọrụ ahụ n'ebe dị jụụ, kpọrọ nkụ na-adịghị na ìhè anyanwụ kpọmkwem na oke okpomọkụ.
• Ijikwa: Handle the device with care to prevent physical damage to ports or the casing.

5. Nchọpụta nsogbu

If you encounter issues with your Plugable HDMI Video Capture Card, refer to the following common solutions:

• Enweghị akara ngosi vidiyo:
  • Gbaa mbọ hụ na ejikọrọ eriri USB na HDMI niile.
  • Verify that your video source is powered on and outputting a signal.
  • Check for HDCP protection on your source device. If the source is HDCP-protected, the capture card will not display video. Disable HDCP on your source if possible (e.g., PlayStation 4 settings).
  • Try a different HDMI cable or USB port on your computer.
• Okwu mmekọrịta ọdịyo:
  • Some streaming software may require manual adjustment of audio delay. Refer to your software's documentation for specific settings.
  • Ensure your audio output settings in your streaming software are correctly configured to use the capture card's audio.
• Amataghị ngwaọrụ:
  • Try connecting the capture card to a different USB 3.0 or USB-C port on your computer.
  • Malitegharịa ekwentị gị ma nwaa ọzọ.
  • Gbaa mbọ hụ na sistemụ arụmọrụ gị emelitere.
• Compatibility with iOS Devices:
  • The capture card may not function correctly with iOS devices using AV Lightning cables due to HDCP restrictions inherent in Apple's ecosystem.

6. Nkọwapụta

7. Akwụkwọ ikike & Nkwado

Plugable products are backed by a Akwụkwọ ikike nke afọ 2. For technical assistance or warranty claims, please visit the official Plugable support website or contact their customer service. Plugable offers North American lifetime support from their engineering team.

Maka ozi ndị ọzọ, gaa na: Nkwado A Na-awụnye