1. Okwu mmalite
The Air Oasis iAdaptAir 2.0 H13 HEPA Filter Air Purifier is designed to enhance indoor air quality by reducing a wide range of airborne contaminants. This manual provides essential information for the safe and effective operation and maintenance of your device.
Akụkụ ndị bụ isi:
- Industry-Leading Cleaning Power: Offers a Clean Air Delivery Rate (CADR) of 177 CFM, covering 1,325 sq. ft. in one hour or 265 sq. ft. with 5 air exchanges per hour.
- Nzacha zuru oke: Captures up to 99% of allergens including smoke, dust, pet dander, and pollen.
- Mold & Biotoxin Reduction: Na-egosi 5-stage purification system (Medical-grade HEPA, Carbon Filtration, Silver Ion Screen, Bi-Polar Ionization, and UV Light) to reduce mold, bacteria, and viruses.
- Fine Particle Removal: Medical-grade True HEPA (H13) filters remove particles as small as 0.05 microns.
- Smart Air Quality Monitoring: Integrated sensor with digital particle count and Auto Mode adjusts fan speed based on real-time air quality.
- Njikọ WiFi: Control schedules, monitor filter life, and view air quality via a dedicated app. Features a removable WiFi chip for EMF-sensitive users.
- Ọrụ dị jụụ: Na-arụ ọrụ na ọkwa mkpọtụ dị ala nke 25 dB.
2. Ozi nchekwa dị mkpa
Please read all instructions carefully before using the appliance and retain for future reference.
- Wepụ ihe nhicha ikuku mgbe niile tupu ị na-akwagharị, na-ehicha, ma ọ bụ na-arụzi ihe ọ bụla.
- Do not operate the appliance with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
- Keep the air purifier away from water or wet areas. Do not immerse in water or other liquids.
- Gbaa mbọ hụ na ikuku ikuku dị na gburugburu unit ahụ. Akwụsịla ntinye ikuku ma ọ bụ ọnụ ụzọ.
- Ngwa a bụ naanị maka ime ụlọ.
- Etinyekwala ihe mba ọzọ n'ime oghere ọ bụla.
- Debe ebe ụmụaka na anụ ụlọ na-apụghị iru.
- Atụmatụ ịdọ aka ná ntị 65: Ngwaahịa a nwere ike ịnwe kemịkal mara Steeti California iji bute ọrịa kansa na ntụpọ ọmụmụ ma ọ bụ mmerụ ahụ ndị ọzọ.
3. Ihe ngwugwu
Chọpụta na ihe niile dị na ngwugwu:
- Air Oasis iAdaptAir 2.0 Air Purifier Unit
- Pre-installed 3-in-1 Filter Cartridge
- Ụdọ ọkụ
- Akwụkwọ ntuziaka (akwụkwọ a)
4. Nhazi
4.1 Mwepu na ntinye
- Jiri nlezianya wepụ ihe nhicha ikuku n'ime ngwugwu ya.
- Place the unit on a firm, level surface. Ensure there is at least 6 inches (15 cm) of space around all sides for optimal airflow.
- Avoid placing the unit near heat sources, direct sunlight, or in areas with excessive moisture.
4.2 Filter Installation (Initial Check)
The 3-in-1 filter cartridge comes pre-installed. Before first use, ensure it is properly seated and any protective packaging has been removed.
- Kwupuo unit ahụ na oghere ọkụ.
- Locate the filter compartment cover (refer to the diagram in Section 6.1 for filter replacement).
- Open the cover and verify the filter is securely in place and free of any plastic wrapping.
- Mechie mkpuchi ngalaba nzacha.
4.3 Njikọ ike
- Connect the power cord to the power inlet on the back of the unit.
- Tinye eriri ọkụ n'ime oghere eletrik ọkọlọtọ.
4.4 WiFi Setup (Optional)
The iAdaptAir 2.0 is WiFi-enabled for smart control via the Air Oasis app. The WiFi chip is removable for users sensitive to EMF.
- Download the 'Air Oasis' app from your device's app store.
- Follow the in-app instructions to connect your air purifier to your home WiFi network.
- If you prefer not to use WiFi, you can remove the WiFi chip (refer to app instructions for location) and operate the unit manually.
5. Ntuziaka ọrụ
The iAdaptAir 2.0 can be operated using the control panel on the unit or via the Air Oasis mobile app.
5.1 Ogwe njikwa gafereview
- Bọtịnụ ike: Gbanyụọ ma ọ bụ gbanyụọ unit ahụ.
- Bọtịnụ Ọsọ Ọsọ: Na-agbagharị n'ọsọ fan (Ọ dị ala, Ọkara, Elu).
- Bọtịnụ Ụdị akpaaka: Activates/deactivates Auto Mode.
- Bọtịnụ ngụ oge: Na-edobe ihe eji arụ ọrụ.
- Lock/Night Mode Button: Activates child lock or Night Mode.
- UV On/Off: Toggles the UVC light function.
- Ionizer On/Off: Toggles the bi-polar ionization function.
- Filter Status Button: Displays remaining filter life.
- Ngosipụta Ogo Ikuku: Shows real-time PM2.5 levels and air quality status (Good, Fair, Poor).
5.2 Basic Arụmọrụ
- Ike Na: Press the Power Button once. The unit will start in the last used mode or default to Auto Mode.
- Gbanwee ọsọ onye ofufe: Press the Fan Speed Button to cycle through Low, Medium, and High settings.
- Nchekwa onwe na ọnọdụ: Press the Auto Mode Button. The unit will automatically adjust fan speed based on detected air quality. The display will show 'AUTO'.
- Ụdị abalị: Press and hold the Lock/Night Mode Button to activate Night Mode. This dims the display lights and operates the fan at a quiet setting. Press again to deactivate.
- Gbanyụọ: Press the Power Button again to turn off the unit.
6. Nlekọta
Mmezi mgbe niile na-eme ka arụmọrụ kacha mma ma na-agbatị ndụ nke ihe nhicha ikuku gị.
6.1 Ndochi nzacha
The 3-in-1 filter cartridge should be replaced approximately every 2 years, depending on usage and air quality. The unit will indicate when a filter change is needed.
- Kpupu ihe nchacha ikuku n'ofe ọkụ.
- Mepee mkpuchi ngalaba nzacha.
- Carefully remove the old filter cartridge.
- Insert the new 3-in-1 filter cartridge, ensuring it is oriented correctly and seated firmly.
- Mechie mkpuchi ngalaba nzacha.
- Plug the unit back in. Reset the filter life indicator by following instructions in the app or by pressing and holding the Filter Status button on the control panel for 3-5 seconds.
6.2 Na-ehicha ngalaba ahụ
- Kwupu ihe ikuku ikuku tupu ihicha ya.
- Wipe the exterior surfaces with a soft, dry cloth. For stubborn marks, use a slightly damp akwa wee kpoo nke oma.
- Ejila ihe nhicha, ihe mgbaze, ma ọ bụ kemịkal siri ike mee ihe.
- Gently vacuum the air intake and outlet grilles to remove dust accumulation.
7. Nchọpụta nsogbu
Rụtụ aka na tebụl dị n'okpuru maka okwu nkịtị na azịza ha.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Unit anaghị agbanye ọkụ. | Enweghị ike ọkụ eletrik; E tinyeghị eriri ọkụ eletrik nke ọma. | Ensure the power cord is firmly plugged into both the unit and a working electrical outlet. Check the circuit breaker. |
| Poor air quality reading despite operation. | Filter is dirty or expired; Air quality sensor is obstructed or dirty. | Check filter life and replace if necessary. Gently clean the air quality sensor area with a dry cotton swab. |
| Mkpọtụ na-adịghị ahụkebe n'oge arụ ọrụ. | Filter not properly installed; Foreign object in fan. | Unplug the unit and check that the filter is correctly seated. Carefully inspect for any obstructions in the fan area. |
| Nsogbu njikọ WiFi. | Incorrect WiFi password; Unit too far from router; WiFi chip removed. | Ensure correct WiFi credentials. Move the unit closer to the router. Verify the WiFi chip is installed if you intend to use app control. Restart the unit and router. |
| Display lights are too bright at night. | Night Mode is not activated. | Activate Night Mode by pressing and holding the Lock/Night Mode button. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | AOIA-S |
| Ụdị | Oasis ikuku |
| Akụkụ ngwaahịa (D x W x H) | 10.75" x 10.04" x 13.5" |
| Ibu | 7 pound |
| Agba | Ọcha |
| Mkpuchi Mpaghara Ala | 1,325 sq ft (1 air exchange/hour) |
| Ọkwa mkpọtụ | 25 dB |
| Wattage | 35 watt |
| Ụdị nzacha | H13 HEPA, Carbon, Silver Ion Screen |
| Mgbakwunye Ọcha | Bi-Polar Ionization, Germicidal UVC LEDs |
| Njikọta | WiFi (removable chip) |
9. Akwụkwọ ikike na nkwado
Air Oasis products are manufactured with high-quality materials and craftsmanship. For specific warranty details, please refer to the warranty card included with your product or visit the official Air Oasis websaịtị.
Nkwado ndị ahịa:
If you encounter any issues or have questions not covered in this manual, please contact Air Oasis customer support:
- Websaịtị: www.airoasis.com
- Email: Tụtụ aka na webweebụsaịtị maka fọm kọntaktị ma ọ bụ adreesị ozi-e.
- Ekwentị: Tụtụ aka na websaịtị maka nọmba ekwentị.
Please have your model number (AOIA-S) and purchase date ready when contacting support.
