1. Okwu mmalite
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your RICOO TS2711 Universal Monitor Desk Mount. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are crucial for optimal performance and safety.
2. Ozi nchekwa
- Ensure that the mounting surface (desk) can support the combined weight of the monitor arm and your monitor.
- Agafela ikike ịdị arọ kacha nke kilogram 8 (17.6 lbs).
- Verify that your monitor's VESA mounting pattern is compatible (75x75mm or 100x100mm).
- Always use the provided hardware. If any parts are missing or damaged, contact customer support.
- Perform installation with care to prevent injury or damage to equipment. It is recommended to have assistance during monitor attachment.
- Debe ụmụaka na anụ ụlọ n'oge echichi.
3. Ihe ngwugwu
Please check that all components are present before beginning installation:
- Nyochaa Mgbakọ ogwe aka
- Ogige Clamp Ntọala
- VESA Efere
- Ngwa mgbakwunye (skru, washers, spacers)
- Tools (Allen keys)
- Akwụkwọ ntuziaka
Foto 3.1: Ofeview of the RICOO TS2711 Monitor Desk Mount components.
4. Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Nọmba nlereanya | TS2711 |
| Ụdị | RICOO |
| Ihe onwunwe | Alloy Steel, Plastic |
| Nha ihuenyo dakọtara | 13-30 sentimita (33-76 cm) |
| Ndakọrịta VESA | 75x75mm, 100x100mm |
| Ike ibu kacha | 8 n'arọ (17.6 lbs) |
| Ụdị mmegharị | Na-ekwu okwu |
| Ogologo Swivel | 360 degrees (at arm joints) |
| Tilt Angle | +/- 45 degrees |
| Ntughari | 360 degrees (for screen orientation) |
| Ụdị nkwụnye | Ogige Clamp |
Image 4.1: Visual representation of VESA compatibility (75x75mm, 100x100mm) and supported screen sizes (13-30 inches).
Image 4.2: Technical drawing illustrating the dimensions and range of motion for the TS2711 monitor arm.
5. Ntọala na nwụnye
5.1 Desktọpụ Clamp Nwụnye
- Tinye oche clamp base to the main pole of the monitor arm.
- Debe ihe clamp on the edge of your desk. Ensure the desk thickness is between 10mm and 88mm for secure attachment.
- Mee ka clamp screw firmly until the arm is stable on the desk. Do not overtighten.
5.2 Monitor Attachment
- Carefully lay your monitor face down on a soft, clean surface.
- Identify the VESA mounting holes on the back of your monitor.
- Attach the VESA plate to the back of your monitor using the appropriate screws and washers from the hardware kit. For curved monitors or monitors with recessed VESA holes, use the provided spacers if necessary.
- With assistance, lift the monitor with the attached VESA plate and slide it onto the monitor arm's mounting head.
- Secure the monitor to the arm by tightening the locking screw on the VESA head.
Image 5.1: The RICOO TS2711 monitor arm securely installed on a desk with a monitor.
5.3 Njikwa eriri
The monitor arm features integrated cable clips to keep your workspace tidy.
- Route your monitor's power and video cables along the arm.
- Use the provided cable clips to secure the cables to the underside of the arm and along the main pole.
- Ensure cables have enough slack to allow for full range of motion without tension.
Image 5.2: Detail of the cable management system, showing how cables can be routed along the arm for a clean setup.
6. Ntuziaka ọrụ (Ndozigharị)
The RICOO TS2711 monitor arm offers various adjustment options to customize your viewahụmahụ.
6.1 Ndozi elu
To adjust the monitor height, loosen the collar on the main pole, slide the arm to the desired height, and then firmly tighten the collar to secure the position.
Image 6.1: Illustration of the height adjustment feature, allowing the monitor to be moved up or down along the main pole.
6.2 Swivel, Tilt, and Rotation
The arm allows for flexible positioning of your monitor:
- Swivel: The arm joints allow for 180-degree swivel, and the VESA plate can swivel 360 degrees, enabling you to position your monitor left or right.
- Gbaa: The monitor can be tilted +/- 45 degrees to reduce glare and find the optimal viewakụkụ n'akuku.
- Ntughari: The VESA plate supports 360-degree rotation, allowing you to switch between landscape and portrait orientations.
Adjustments can be made by gently moving the monitor to the desired position. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.
Image 6.2: Demonstrates the monitor's ability to swivel up to 180 degrees, tilt up to 90 degrees, and rotate 360 degrees.
7. Nlekọta
- Nhicha: Jiri ihe dị nro hichaa ogwe aka ihe nlele ahụ, damp akwa . Zere ihe nhicha ma ọ bụ ihe mgbaze.
- Nyocha oge: Regularly check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
- mmanu mmanu: No lubrication is required for the moving parts.
8. Nchọpụta nsogbu
- Nyochaa Sags ma ọ bụ anaghị ejide ọnọdụ: The tension in the arm joints may need adjustment. Use the provided Allen key to tighten the screws at the joints until the monitor holds its position firmly.
- Ogwe aka siri ike nke ukwuu ịkwaga: The tension in the arm joints may be too high. Use the provided Allen key to slightly loosen the screws at the joints until the arm moves smoothly.
- Ogige Clamp bụ Loose: Gbaa mbọ hụ na desktọpụ clamp screw is fully tightened against the desk surface. Verify that the desk thickness is within the supported range.
- Nyochaa Ọ bụghị ọkwa: Adjust the tilt mechanism or the VESA plate rotation to level the monitor.
9. Akwụkwọ ikike na nkwado
For warranty information, please refer to the documentation included with your product or visit the official RICOO website. If you encounter any issues or require technical assistance, please contact RICOO customer support through their official channels or the retailer where the product was purchased.
