Radial Catapult MINI TX Cat 5 Audio Snake User Manual

Okwu mmalite

The Radial Catapult MINI TX is a compact and robust 4-channel analog audio snake transmitter designed to send balanced audio signals over a standard Cat 5 or Cat 6 Ethernet cable. This device, when paired with a Catapult MINI RX unit (sold separately), provides a convenient and cost-effective solution for transmitting multiple audio channels over long distances, utilizing existing network infrastructure or dedicated Cat cable runs. Its passive design ensures high-fidelity audio transmission without the need for power.

Radial Catapult MINI TX unit, angled view, showing the blue casing and product name.

Figure 1: Radial Catapult MINI TX unit, angled view, highlighting its compact design and branding.

Atụmatụ igodo

4-Channel Audio Transmission: Supports four balanced analog audio signals.
Cat 5/6 Connectivity: Utilizes standard Ethernet cables for signal transmission, offering flexibility and cost savings.
Ọrụ na-agafe agafe: Requires no external power, simplifying setup and increasing reliability.
Nhazi kọmpat na nke na-adịgide adịgide: Housed in a rugged steel enclosure, suitable for professional use.
XLR and RJ45 Connectors: Standardized connectors for easy integration into existing audio systems.

Ntuziaka nhazi

Setting up the Catapult MINI TX is straightforward. Ensure you have a Catapult MINI RX unit and a shielded Cat 5 or Cat 6 Ethernet cable of appropriate length for your application.

Chọpụta akụrụngwa: Locate the Catapult MINI TX (transmitter) and Catapult MINI RX (receiver) units. The TX unit typically has female XLR inputs, and the RX unit has male XLR outputs.
Connect Audio Sources to TX: Connect your balanced audio sources (e.g., microphones, preamps, mixing console outputs) to the four female XLR inputs on the Catapult MINI TX unit. Each input corresponds to a specific channel.

Radial Catapult MINI TX with four XLR cables connected, showing the input side.

Figure 2: Catapult MINI TX with four XLR cables connected, illustrating the input setup.

Jikọọ eriri Ethernet: Connect one end of a shielded Cat 5 or Cat 6 Ethernet cable to the RJ45 connector on the Catapult MINI TX unit.

Ọgwụgwụ view of Radial Catapult MINI TX showing the RJ45 and XLR connectors.

Figure 3: End view of the Catapult MINI TX, highlighting the RJ45 and XLR connector ports.

Connect RX Unit: Connect the other end of the Ethernet cable to the RJ45 connector on the Catapult MINI RX unit.
Connect Audio Destinations from RX: Connect the male XLR outputs of the Catapult MINI RX unit to your audio destinations (e.g., mixing console inputs, audio interface inputs, powered speakers).
Nyochaa njikọ: Double-check all cable connections to ensure they are secure and correctly routed.

Ntuziaka ọrụ

Once the Catapult MINI TX and RX units are connected, operation is automatic due to their passive design. No power or configuration is required.

Usoro mgbaama: Audio signals from your sources connected to the TX unit's XLR inputs will be transmitted over the Cat 5/6 cable to the RX unit, and then output via its XLR connectors.
Maapụ ọwa: Each XLR input on the TX unit corresponds directly to an XLR output on the RX unit. Ensure your audio sources and destinations are connected to the correct channels.
Ogologo eriri USB: While Cat 5/6 cables can transmit signals over significant distances, extremely long runs (e.g., hundreds of feet) may introduce slight signal degradation. Test your setup with the intended cable length to ensure optimal performance.
Shielded Cable Requirement: Always use shielded Cat 5 or Cat 6 cable for reliable and noise-free operation. Unshielded cables may introduce interference.

Nlekọta

The Radial Catapult MINI TX is designed for durability and requires minimal maintenance.

Nhicha: Jiri ákwà dị nro ma kpọọ nkụ hichaa mpụta nke ihe ahụ. Zere ihe nhicha ma ọ bụ ihe mgbaze.
Nchekwa: Store the unit in a dry environment, away from extreme temperatures and direct sunlight, when not in use.
Nyocha USB: Periodically inspect your Cat 5/6 and XLR cables for any signs of wear, damage, or corrosion. Replace damaged cables immediately.
Nlekọta njikọ: Keep the XLR and RJ45 connectors free of dust and debris.

Nchọpụta nsogbu

If you encounter issues with your Catapult MINI TX, consider the following troubleshooting steps:

Nsogbu	Ihe nwere ike ime	Ngwọta
Enweghị mgbama ọdịyo	Njikọ eriri na-ezighi ezi Damaged Cat 5/6 cable Unshielded Cat 5/6 cable Eriri XLR na-adịghị mma Source/destination device issues	Ensure all XLR and RJ45 cables are securely connected. Verify you are using a shielded Cat 5 or Cat 6 cable. Test cables individually with other equipment. Check power and settings of connected audio devices.
Hum or noise in audio	Unshielded Cat 5/6 cable Ground loop issues nnyonye anya elektrọnik mpụga	Ensure you are using a shielded Cat 5 or Cat 6 cable. Try isolating power supplies of connected equipment. Route Cat cable away from power lines or strong electromagnetic fields.
Mgbama na-adịte aka	Njikọ eriri adịghị atọ ụtọ USB ma ọ bụ njikọ mebiri emebi	Reseat all cables firmly. Inspect cables and connectors for physical damage. Replace if necessary.

Nkọwapụta

Njirimara	Nkọwa
Nlereanya	R800 8028
Ọwa	4 (balanced analog audio)
Connector Type (Audio)	XLR Female (Input)
Connector Type (Data)	RJ45
Achọrọ USB	Shielded Cat 5 or Cat 6 Ethernet cable
Ọrụ	Passive (no power required)
Akụkụ (L x W x H)	6.3 x 4.3 x 3 sentimita (ihe dị ka)
Ibu	1.06 pound (ihe dị ka)
Ihe eji ewu ụlọ	Igwe igwe
Agba	Acha anụnụ anụnụ

Akwụkwọ ikike na nkwado

Radial Engineering products are built to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official Radial Engineering website or contact their customer support directly. For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the Radial Engineering support page or contact their authorized service centers.

Ndị ọchịchị Websaịtị: www.radialeng.com

Radial Engineering R800 8028