1. Okwu mmalite
The AVPro Edge AC-EX70-UHD-KIT is a high-performance HDMI extender system designed to transmit 4K UHD content over long distances using a single CAT-5e/6a/7 UTP/STP cable. This kit includes both a Transmitter (TX) and a Receiver (RX) unit, providing a reliable solution for distributing high-value video signals in various environments, from residential setups to commercial installations.
Akụkụ ndị bụ isi:
- Extended Transmission: Supports transmission up to 70 meters (230 feet) for 1080P signals and up to 40 meters (131 feet) for 4K UHD signals (4Kx2K 30Hz or 4Kx2K 60Hz YUV 4:2:0).
- Bandwit dị elu: 10.2 Gbps video bandwidth ensures high-quality signal delivery.
- Teknụzụ HDBaseT: Utilizes HDBaseT for efficient and stable signal extension over a single CAT cable.
- Bi-Directional Power (PoH): Either the Transmitter or Receiver can be powered, simplifying installation.
- HDMI 2.0(a/b) & HDCP 2.2/1.4 Compliant: Ensures compatibility with modern video sources and displays.
- Nkwado HDR: Compatible with High Dynamic Range content.
- Bi-directional IR & RS-232: Allows for control of source equipment from the display location or vice-versa.
- Nkwụnye & Kpọọ: Emebere maka nrụnye dị mfe.
- Field Firmware Updateable: Allows for future enhancements and bug fixes.
- Nchekwa ESD: Built-in circuitry protects against electrostatic discharge up to 7KV.
2. Ihe ngwugwu
Please verify that all items listed below are included in your package. If any items are missing or damaged, contact your vendor immediately.
Image: All accessories included with the AVPro Edge AC-EX70-UHD-KIT, including power supply, IR units, RS-232 cables, and mounting ears.
- 1x AC-EX70-UHD-T (Transmitter Unit)
- 1x AC-EX70-UHD-R2 (Receiver Unit)
- 1 x 48V Nnye ike
- 1x IR Tx Unit (IR Emitter)
- 1x IR Rx Unit (IR Receiver)
- 1x 3.5mm Stereo Plug to Male DB9 Cable (for RS-232 to serial port)
- 1x 3.5mm Stereo Plug to Female DB9 Cable (for RS-232 to PC)
- 1x Pair of Mounting Ears
- Ntuziaka ọrụ (akwụkwọ ntuziaka a)
3. Ntọala na nwụnye
Follow these steps to properly install and connect your AVPro Edge AC-EX70-UHD-KIT.
3.1 Unit Identification
Image: The AVPro Edge AC-EX70-UHD Transmitter (left) and Receiver (right) units, showing their labels and port layouts.
The kit consists of two main units: the Ntughari (TX) na nke Onye nnata (RX). Ensure you correctly identify each unit before making connections.
Ihe eserese 3.2 njikọ
The following diagram illustrates a typical connection setup for the AC-EX70-UHD-KIT.
Oyiyi: Otu akụkụ view of both the Transmitter and Receiver units, highlighting the HDMI, IR, RS-232, and HDBaseT ports for connection reference.
3.3 Nzọụkwụ Nwụnye:
- Prepare CAT Cable: Use a high-quality CAT-5e, CAT-6a, or CAT-7 UTP/STP cable. Ensure the cable is properly terminated following the IEEE-568B standard. The quality of the CAT cable directly impacts transmission distance and stability.
- Connect HDMI Source to Transmitter (TX): Connect an HDMI cable from your video source (e.g., Blu-ray player, media streamer, PC) to the HDMI n'ime port on the AC-EX70-UHD-T Transmitter unit.
- Connect HDBaseT Link: Connect one end of the prepared CAT cable to the HDBaseT pụọ port on the Transmitter and the other end to the HDBaseT IN port on the AC-EX70-UHD-R2 Receiver unit.
- Connect HDMI Display to Receiver (RX): Jikọọ eriri HDMI site na eriri HDMI HDMI pụọ port on the Receiver unit to your display device (e.g., TV, projector, monitor).
- Jikọọ ọkọnọ ike: Connect the included 48V power supply to either the Transmitter or the Receiver unit. Due to Bi-Directional Power (PoH) capability, only one power supply connection is required for the entire system to function.
- (Optional) IR Control:
- To control the source from the display location: Connect the IR Rx unit to the IR IN port on the Receiver. Connect the IR Tx unit to the Apụọ port on the Transmitter and place its emitter eye over the IR sensor of your source device.
- To control the display from the source location: Connect the IR Rx unit to the IR IN port on the Transmitter. Connect the IR Tx unit to the Apụọ port on the Receiver and place its emitter eye over the IR sensor of your display device.
- (Optional) RS-232 Control: Connect the appropriate 3.5mm to DB9 RS-232 cable to the RS-232 port on either the Transmitter or Receiver, and then to your control system or PC for serial communication.
- Secure Units: Use the provided mounting ears to secure the Transmitter and Receiver units in their desired locations, if necessary.
4. Ntuziaka ọrụ
Once all connections are made and power is supplied, the AC-EX70-UHD-KIT will begin operation automatically.
4.1 LED egosi
Both the Transmitter and Receiver units feature LED indicators to provide status information:
- 48V LED: Illuminates when the unit is receiving 48V power.
- Ikanam ọnọdụ: Indicates the operational status of the unit. A solid light typically means normal operation.
- Link ikanam: Illuminates when a stable HDBaseT link is established between the Transmitter and Receiver.
4.2 Operation Mode Switch
Foto: Top view of the Transmitter and Receiver units, highlighting the 'Operation Mode' switch with 'Program' and 'Normal' settings.
Each unit has an 'Operation Mode' switch with two settings:
- Nkịtị: This is the standard operating mode for everyday use. Ensure the switch is set to 'Normal' for regular video transmission.
- Mmemme: This mode is used for firmware updates or specific diagnostic purposes. Do not operate the unit in 'Program' mode during normal video transmission.
4.3 IR and RS-232 Control
The bi-directional IR and RS-232 ports allow for seamless control of connected devices. Refer to the setup section for connection details. Once connected, IR signals from a remote control or RS-232 commands from a control system will be transmitted across the HDBaseT link to control the corresponding device.
5. Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Nọmba nlereanya | AC-EX70-UHD-KIT |
| Video bandwidth | 10.2 Gbps |
| Nkwado HDMI | HDMI V2.0(a/b) |
| Nkwado HDCP | Ihe ngosi HDCP 2.2 / 1.4 |
| Nkwado HDR | Ee |
| UHD Support | 4Kx2K 30Hz or 4Kx2K 60Hz YUV 4:2:0 |
| Transmission Distance (1080P) | Ruo mita 70 (ụkwụ 230) |
| Transmission Distance (4K) | Ruo mita 40 (ụkwụ 131) |
| Achọrọ USB | Single CAT-5e/6a/7 UTP/STP (IEEE-568B) |
| Ike karịrị HDBaseT (PoH) | Akụkụ abụọ |
| Mgbama njikwa | Bi-directional IR & RS-232 |
| Nchekwa ESD | Up to 7KV |
| Ibu Ibu | 1.73 pounds (total for kit) |
| Agba | Nwa |
| Onye nrụpụta | AVPro Edge |
6. Nchọpụta nsogbu
If you encounter issues with your AC-EX70-UHD-KIT, please refer to the following common problems and solutions:
- Enweghị mmepụta vidiyo:
- Ensure all HDMI cables are securely connected to both the source and display, and to the extender units.
- Verify that the CAT cable is properly terminated (IEEE-568B) and securely connected to both the Transmitter and Receiver.
- Check that the power supply is connected and the 48V LED on at least one unit is illuminated.
- Kwenye na nke Link ikanam is illuminated, indicating a stable HDBaseT connection. If not, try a different CAT cable or shorten the cable length for testing.
- Test the HDMI source and display directly with a short HDMI cable to rule out issues with those devices.
- Ensure the 'Operation Mode' switch on both units is set to 'Normal'.
- Poor Picture Quality (Flickering, Snow, Distortion):
- This often indicates a problem with the CAT cable. Replace the CAT cable with a higher quality, shorter, or newly terminated one.
- Ensure the cable length does not exceed the maximum specified for your resolution (70m for 1080P, 40m for 4K).
- Check for strong electromagnetic interference (EMI) near the CAT cable run.
- IR or RS-232 Control Not Working:
- Verify that the IR Tx/Rx units or RS-232 cables are correctly connected to the appropriate ports on the extender units and the controlled devices.
- For IR, ensure the IR emitter eye is directly over the IR sensor of the device to be controlled.
- For RS-232, confirm the correct baud rate and other serial communication settings are configured on your control system.
- Ngalaba Ndị Na-anaghị Arụ Ọrụ:
- Check the power adapter connection to both the unit and the wall outlet.
- Gbaa mbọ hụ na ntinye ọkụ na-arụ ọrụ.
- If using PoH, ensure the CAT cable is properly connected and functional, as power is transmitted over it.
7. Nlekọta
The AVPro Edge AC-EX70-UHD-KIT is designed for reliable, long-term operation with minimal maintenance.
- Nhicha: Use a soft, dry cloth to clean the exterior of the units. Do not use liquid or aerosol cleaners.
- Mmelite femụwe: The units are field firmware updateable. Periodically check the AVPro Edge website for available firmware updates to ensure optimal performance and compatibility. Follow the instructions provided with the firmware update package carefully.
- Igwe ikuku: Ensure the units have adequate ventilation to prevent overheating. Do not block the ventilation holes.
8. Akwụkwọ ikike na nkwado
For detailed warranty information, technical support, and additional resources, please visit the official AVPro Edge website or contact your authorized AVPro Edge dealer. Keep your purchase receipt as proof of purchase for warranty claims.
AVPro Edge Websaịtị: www.avproedge.com
