Okwu mmalite
The TESmart 4x1 HDMI Switch HSW0401A1U allows you to connect up to four HDMI source devices to a single HDMI display. This device supports 4K@60Hz resolution, HDR, HDCP 2.2, and 3D, providing high-quality video and audio. It also features optical S/PDIF and L/R audio outputs for enhanced audio flexibility. Control is available via front panel buttons or an IR remote control, with an optional automatic switching mode for convenience.
Foto 1: The TESmart 4x1 HDMI Switch streamlines connections, allowing multiple input devices to share a single display, reducing cable clutter.
Atụmatụ igodo
- 4x1 HDMI Switcher: Na-ejikọ ngwaọrụ isi mmalite HDMI anọ na otu ngosipụta HDMI.
- 4K HDMI with Audio Output: Supports 3840x2160@60Hz 4:4:4, HDR, HDCP 2.2, and 1080P 3D. Includes S/PDIF optical and L/R analog audio outputs.
- Multiple Switching Methods: Easily switch between sources using front panel buttons, IR remote control, or automatic detection.
- Ndakọrịta sara mbara: Compatible with various HDMI sources such as PlayStation, Xbox, Nintendo Switch, Blu-ray players, set-top boxes, Chromecast, Apple TV, and projectors.
- Ihe owuwu na-adịgide adịgide: Nwere aluminom alloy casing maka nkwalite ịdịte aka.
Foto 2: The switch supports advanced video technologies including 4K@60Hz, HDCP 2.2, HDR 10, and 3D for a high-quality viewahụmahụ.
Foto 3: The switch offers broad compatibility with a range of input and output devices, making it versatile for different setups.
Ngwaahịa gafereview
Akụkụ ihu na azụ
Foto 4: Front and Rear Panel Layout of the TESmart 4x1 HDMI Switch.
Akụkụ ihu panel:
- Onye nnata IR: Receives signals from the IR remote control.
- Input Selection Status LEDs (1-4): Indicate the currently active HDMI input.
- Bọtịnụ nhọrọ ntinye: Manually cycles through HDMI input sources.
- Audio Mode Selection Status LEDs (5.1, 2.0, Auto): Show the selected audio output mode.
- Audio Mode Selection Button: Toggles between 5.1 channel, 2.0 channel, and Auto audio output modes.
- Ike mgba ọkụ: Gbanyụọ ma ọ bụ gbanyụọ ngwaọrụ.
Akụkụ azụ azụ:
- Ntinye ike DC 5V: A na-ejikọ ya na ihe nkwụnye ike DC 5V nke enyere.
- HDMI Input Ports (1-4): Connect your HDMI source devices.
- Ọdụ ụgbọ mmiri HDMI: Jikọọ na ngosi HDMI gị.
- S/PDIF Optical Audio Output: Connects to an optical audio receiver or soundbar.
- AUX L/R Audio Output: Connects to an analog audio system via a 3.5mm jack.
Ntuziaka nhazi
- Jikọọ isi iyi HDMI: Connect up to four HDMI source devices (e.g., gaming consoles, Blu-ray players, PCs) to the HDMI Input ports (1-4) on the rear panel of the switch using high-quality HDMI cables.
- Jikọọ HDMI ngosi: Connect your HDMI display (TV, monitor, projector) to the HDMI Output port on the rear panel of the switch using a high-quality HDMI cable.
- Jikọọ Mmepụta Ọdịyo (Nhọrọ):
- For optical audio, connect an S/PDIF optical cable from the switch's S/PDIF port to your audio receiver or soundbar.
- For analog audio, connect a 3.5mm audio cable from the switch's L/R port to your audio system.
- Njikọ Ike: Plug the provided 5V DC power adapter into the DC 5V input port on the switch, then plug the adapter into a power outlet.
- Ike Na: Turn on the HDMI switch using the power switch on the front panel. The LED indicators will illuminate.
Ntuziaka ọrụ
Switching HDMI Inputs
Foto 5: Multiple methods for switching between HDMI sources.
- Manual Switching (Front Panel): Press the "Input" button on the front panel to cycle sequentially through the connected HDMI sources (Input 1 → Input 2 → Input 3 → Input 4). The corresponding LED indicator will light up.
- Njikwa anya IR: Use the provided IR remote control to directly select the desired input by pressing the corresponding number button (1, 2, 3, or 4). Ensure the remote is pointed towards the IR receiver on the front panel.
- Mgbanwe na-akpaghị aka: The switch supports automatic detection. When a new input device is attached or powered on, the HDMI switch will automatically switch to this newly plugged-in source. If a connected input source is removed, the HDMI switch will switch to the first valid input source automatically. If the HDMI switch is connected to a non-signal input port, it will switch to the next valid port automatically in a few seconds.
Nhọrọ Ụdị ọdịyo
- Press the "Audio" button on the front panel or the corresponding button on the IR remote to select the desired audio output mode: 5.1 channel, 2.0 channel, or Auto. This allows you to match the audio output to your sound system's capabilities.
Vidio 1: This video demonstrates how to enable or disable the automatic detection switch mode on the TESmart 4x1 HDMI Switch, showing the button presses and LED indicator responses.
Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Nọmba nlereanya | HSW0401A1U |
| Akụkụ ngwaahịa | 7.72 x 3.15 x 1.1 sentimita asatọ |
| Ibu Ibu | 1.2 pound (500g) |
| Nkwado HDCP | 2.2 |
| Ọnụego data | 18 Gbps |
| Mkpebi Max | 3840x2160@60Hz 4:4:4 |
| Nkwado ọdịyo | Surround sound (up to 7.1ch) or stereo digital audio |
| Nchekwa ESD | Human body model - ±8KV (Air-gap discharge) |
| Ntinye | 4 * HDMI ụdị A |
| Mpụta | 1* HDMI Type A, 1* AUX (for L/R audio out), 1* S/PDIF audio out |
| Chasing ihe | Aluminom alloy |
| Ịnye ọkụ | DC 5V 1A |
| Okpomọkụ arụ ọrụ/nchekwa | 0 to 70 degree / -40 to 85 degree Celsius |
| Iru mmiri na-arụ ọrụ | 10 ruo 90% RH |
| Ụdị batrị dịpụrụ adịpụ | CR2025 (anaghị etinye ya) |
Nchọpụta nsogbu
- No Signal or Flickering Display:
- Gbaa mbọ hụ na ejikọrọ eriri HDMI niile nke ọma.
- Use certified high-speed 18Gbps HDMI cables, especially for 4K@60Hz content, to prevent signal loss or flickering.
- Verify the correct input source is selected on the switch and your display.
- Try restarting the switch and connected devices.
- Audio Issues (No Sound or Incorrect Format):
- Check that your audio system is properly connected to the S/PDIF or L/R output ports.
- Ensure the audio mode on the switch (5.1, 2.0, Auto) matches the capabilities of your audio receiver or soundbar.
- Confirm that the audio settings on your source device are correctly configured for the desired output.
- IR Remote Control Not Responding:
- Ensure a CR2025 battery is correctly installed in the remote (battery not included).
- Point the remote directly at the IR receiver on the front panel of the switch.
- Remove any obstructions between the remote and the switch.
- Na-ekpo oke ọkụ nke ngwaọrụ:
- Ensure the switch is placed in a well-ventilated area and not covered, allowing for proper heat dissipation.
Akwụkwọ ikike na nkwado
The TESmart 4x1 HDMI Switch HSW0401A1U comes with a 1-year warranty from the date of order. Free technical support is available for any issues or questions you may have. For assistance, please contact TESmart support through the vendor's official channels.
