Millenium BS-500 Height-Adjustable Monitor Stands Set User Manual

1. Okwu mmalite

This manual provides essential instructions for the safe and effective use of your Millenium BS-500 Height-Adjustable Monitor Stands Set. These stands are designed to position your nearfield monitors at an optimal height for improved audio monitoring. Please read this manual thoroughly before assembly and operation, and retain it for future reference.

Foto nke 1.1: The Millenium BS-500 Height-Adjustable Monitor Stands Set. This image displays two monitor stands, each featuring a triangular base, a central pole, and a top plate designed to support a studio monitor. One stand is shown at a lower height, and the other at a higher height, illustrating the adjustable nature of the product.

2. Ntuziaka nchekwa

• Ensure all components are securely fastened before placing any equipment on the stands.
• Do not exceed the maximum load capacity of 45 kg per stand.
• Place stands on a stable, level surface to prevent tipping.
• Keep hands clear of moving parts during height adjustment.
• Avoid placing stands in high-traffic areas where they could be accidentally knocked over.
• Regularly inspect the stands for any signs of wear or damage. Do not use if damaged.

3. Ihe ngwugwu

The Millenium BS-500 Height-Adjustable Monitor Stands Set includes the following components:

• 2x Monitor Stands (each stand consists of a base, main pole, and top plate)
• Necessary assembly hardware (screws, washers, etc. - specifics not provided, general statement)

4. Ntọala na Mgbakọ

Follow these steps to assemble your Millenium BS-500 monitor stands:

1. Wepu akụrụngwa: Carefully remove all parts from the packaging and verify that all components listed in Section 3 are present.
2. Attach Base to Pole: Securely attach the triangular base to the bottom of the main support pole using the provided screws and tools. Ensure the connection is tight and stable.
3. Tinye efere dị elu: Fasten the monitor support plate to the top of the main support pole. Ensure it is level and securely attached.
4. Repeat for Second Stand: Follow the same steps to assemble the second monitor stand.
5. Nkwanye izizi: Position the assembled stands on a flat, stable surface where your monitors will be used.

Note: Specific screw types and tools are not detailed in product information. Use appropriate fasteners and ensure all connections are firm.

5. Operation: Height Adjustment

The Millenium BS-500 monitor stands offer height adjustment to optimize your listening position.

1. Remove Monitor: Before adjusting, carefully remove any monitor placed on the stand.
2. Unlock Adjustment Mechanism: Locate the height adjustment knob or pin on the main support pole. Loosen or disengage it to allow the pole to move freely.
3. Gbanwee Ogologo: Carefully raise or lower the upper section of the stand to your desired height. The stands are adjustable from 93 cm to 115 cm.
4. Secure Adjustment: Once the desired height is reached, firmly tighten the adjustment knob or re-engage the pin to lock the stand in place. Ensure it is fully secured before proceeding.
5. Replace Monitor: Carefully place your monitor back onto the top plate, ensuring it is centered and stable.

Always ensure the stand is securely locked at the desired height before placing equipment on it.

6. Nlekọta

Proper maintenance ensures the longevity and safe operation of your monitor stands.

• Nhicha: Wipe the stands with a soft, dry cloth to remove dust. For stubborn dirt, use a slightly damp ákwà na ihe nhicha dị nro, wee kpoo ya nke ọma. Zere iji ihe nhicha na-ehicha ihe.
• Nyocha: Periodically check all screws and connections for tightness. Re-tighten if necessary. Inspect the stand for any signs of rust, bending, or structural damage.
• Nchekwa: If storing the stands for an extended period, ensure they are clean and dry. Store in a cool, dry place.

7. Nchọpụta nsogbu

If you encounter issues with your monitor stands, refer to the following common problems and solutions:

• Nkwụsi ahụ adịghị ike:
  • Ensure the stand is placed on a completely flat and level surface.
  • Verify that all assembly screws, especially those connecting the base to the pole, are fully tightened.
  • Check that the height adjustment mechanism is securely locked.
• Ihe isi ike imezi elu:
  • Ensure the adjustment knob or pin is fully loosened or disengaged.
  • Check for any obstructions or debris within the telescoping pole sections.
  • Do not force the adjustment; if it remains stiff, contact customer support.
• Stand Appears Damaged:
  • Kwụsị iji ya ozugbo.
  • Do not attempt to repair structural damage yourself. Contact Millenium customer support for assistance.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information, technical support, or service inquiries regarding your Millenium BS-500 Height-Adjustable Monitor Stands Set, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Onye nrụpụta: Narị Afọ Iri