1. Okwu mmalite
The Jebao CBF-15000 Pressurized Pond Filter is designed to maintain clear and healthy pond water. It features an integrated 36-watt UV-C clarifier and an easy-clean mechanism for convenient maintenance. This filter is suitable for ponds up to 4000 gallons and can be installed either above water level or partially recessed into the ground.
Nyocha 1: N'eluview of the Jebao CBF-15000 Pressurized Pond Filter.
2. Mkpa Safetydọ Aka ná Ntị Dị Mkpa
- Kwụpụ mgbe ọ bụla ọkọnọ ọkụ tupu ime mmezi ma ọ bụ ihicha ọ bụla.
- Ensure the filter is installed on a stable, level surface.
- Ejila UV-C l rụọ ọrụamp outside of its housing, as direct exposure to UV-C radiation can be harmful to eyes and skin.
- This filter is designed for pond use only. Do not use with flammable or corrosive liquids.
- Ensure all electrical connections are waterproof and meet local safety standards.
- Do not use with a pump that produces over 17 feet (7.25 psi) of head.
3. Ihe ngwugwu
Chọpụta na ihe niile dị na ngwugwu gị:
- Jebao CBF-15000 Pressurized Filter Unit
- Integrated 36-watt UV-C Lamp
- Hose adapters: 1", 1-1/4", 1-1/2", and 2" (various sizes included)
- Filter Media (sponges, bio-balls)
- Akwụkwọ ntuziaka onye ọrụ
Note: Water pump and pond tubing are sold separately.
4. Ntọala na nwụnye
4.1 Ntinye
The CBF-15000 filter can be installed either above water level or recessed into the ground beside the pond, up to the filter lid. Ensure the chosen location is stable and allows for easy access for maintenance.
4.2 Njikọta Poses
Identify the 'In', 'Out', and 'Dirty' ports on the filter head. Attach appropriate hose adapters and connect your pond pump's output to the 'In' port, the filtered water return to the 'Out' port, and a waste hose to the 'Dirty' port for cleaning cycles.
Figure 2: Inlet, Outlet, and Dirty Water Ports.
4.3 UV-C Lamp Njikọ
UV-C lamp is integrated into the filter head. Ensure its power cable is securely connected and routed safely. The filter includes an indicator light to confirm UV-C operation.
Figure 3: UV-C Indicator Light.
4.4 General Filter Features (Video Example)
Vidiyo a na-enye nkọwa zuru okeview of a bio pressure pond filter, demonstrating features such as a turbidity meter gauge, sponge cleaning handle, replaceable sponges, built-in UV lamp, and pipe connections. While not the exact CBF-15000 model, it illustrates common functionalities found in similar pond filters.
Video 1: VIVOGROW Bio Pressure Pond Filter Overview (General features demonstration).
5. Ntuziaka ọrụ
5.1 Mbido mbụ
After connecting all hoses and ensuring secure fittings, turn on your pond pump. Allow water to fill the filter completely. Once water flows out of the 'Out' port, plug in the filter's power cord to activate the UV-C lamp.
5.2 Monitoring UV-C Function
The filter head features an indicator light (refer to Figure 3) that illuminates when the UV-C lamp is operational. Regularly check this light to ensure the UV-C clarifier is functioning correctly. If the light is off, the UV-C lamp may need replacement or troubleshooting.
6. Nlekọta
6.1 Easy Clean Technology
The CBF-15000 is equipped with an easy-clean mechanism. To clean the filter sponges without opening the unit, simply pull the handle up and push it down repeatedly. This action compresses the sponges, dislodging accumulated debris. Ensure the 'Dirty' port is open to allow waste water to drain.
Figure 4: Cleaning Handle in Raised Position.
Figure 5: Cleaning Handle in Lowered Position.
6.2 Deep Cleaning and Media Replacement
For thorough cleaning or media replacement, disconnect power and open the filter unit. Remove and rinse the filter sponges and bio-balls with pond water (not tap water, to preserve beneficial bacteria). Replace media as needed. Reassemble the unit, ensuring all seals are correctly seated to prevent leaks.
6.3 UV-C Lamp Ndochi
UV-C lamp typically needs replacement every 8-12 months, or when the indicator light no longer illuminates. Disconnect power, carefully remove the old lamp, and install a new one according to the instructions provided with the replacement lamp. Avoid touching the glass of the new lamp jiri aka efu.
6.4 Filter Media Bag Assembly (General Example)
This video demonstrates the assembly of a filter media bag frame. While the specific product shown may differ, the principles of assembling a frame to hold filter media are applicable to various pond filtration systems.
Video 2: Hecaty Anti-Clogging Cube Filter Box Assembly (General filter media assembly).
7. Nchọpụta nsogbu
- Water Not Clearing: Ensure the UV-C lamp is working (check indicator light). Clean filter media thoroughly. Verify pump flow rate is adequate for pond size and filter specifications.
- Mgbapụta: Check all hose connections for tightness. Inspect O-rings and seals on the filter head and housing for proper seating and damage.
- UV-C Indicator Light Off: Confirm the filter is plugged in. The UV-C lamp may be burnt out and requires replacement.
- Mbelata mmiri: Filter media may be clogged. Perform an easy-clean cycle or a deep clean. Check for kinks in hoses.
8. Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Nọmba nlereanya | CBF-15000 |
| Oke ọdọ mmiri kacha | 4000 lita |
| Oke arụrụ ọrụ | 7.25 psi / 17 ft. of head |
| Ike UV | 36-watt, 110-120V 60Hz |
| Akụkụ ngwaahịa | 16.5" x 17" x 24" (Width x Depth x Height) |
| Ibu Ibu | 23 pound |
| Hose Adapter Sizes | 1", 1-1/4", 1-1/2", 2" |
| Onye nrụpụta | Jebao |
9. Akwụkwọ ikike na nkwado
For warranty information, technical support, or replacement parts, please contact Jebao customer service. Keep your purchase receipt and product model number (CBF-15000) handy for faster service.
Typical warranty periods for pond equipment vary. Please refer to your purchase documentation or the manufacturer's official websaịtị maka usoro na ọnọdụ akwụkwọ ikike akọwapụtara.
