REDARC Smart Start SBI12 12V 100A Instruction Manual

1. Okwu mmalite

This manual provides comprehensive instructions for the installation, operation, and maintenance of the REDARC Smart Start SBI12 12V 100A Battery Isolator. The SBI12 is a microprocessor-controlled device designed to manage dual battery systems by protecting the primary (start) battery from excessive discharge while allowing the auxiliary battery to power non-essential loads. It functions as a solenoid priority system, ensuring efficient charging of your secondary battery when the vehicle is in motion.

2. Ngwaahịa gafereview

The REDARC Smart Start SBI12 offers advanced battery management for 12V dual battery systems, providing a continuous rating of 100A. Key features include:

Njikwa Microprocessor: Ensures precise management of battery charging and isolation.
Solenoid Priority System: Optimizes charging for the auxiliary battery.
Overmold Design: Provides enhanced durability and protection.
Nha kọmpat: Facilitates easy installation in various vehicle types.
Silver Contacts: Ensures extended lifespan and suitability for marine environments.
Teknụzụ nchekwa ike: Minimizes current draw when in standby.
Ngosipụta mmejọ: LED indicators provide warnings for conditions such as voltage drops, over-voltage, and excessive current.
Fully Surge Protected: Na-echebe megide ọkụ eletrik.

Unlike diode-type isolators, the SBI12 avoids voltage drop issues, ensuring more efficient power transfer.

3. Ozi nchekwa

Please read and understand all safety warnings and instructions before installing or operating the REDARC Smart Start SBI12. Failure to do so may result in injury, damage to the product, or damage to your vehicle.

Always disconnect the vehicle's main battery before performing any electrical work.
Ensure all wiring is correctly sized for the current draw and properly fused.
Yiri akụrụngwa nchedo nkeonwe dabara adaba, gụnyere nchedo anya na uwe aka.
Avoid installing the unit in areas exposed to extreme heat, moisture, or corrosive substances unless specifically designed for such environments.
Consult a qualified auto electrician if you are unsure about any aspect of the installation.
This product is designed for 12V DC systems only. Do not connect to other voltage sistemu.

4. Ntọala na nwụnye

Proper installation is crucial for the optimal performance and longevity of your SBI12. The unit should be mounted securely in a dry, well-ventilated area, away from direct heat sources.

4.1 njirimara akụrụngwa

Foto nke 4.1.1: N'ihu view of the REDARC Smart Start SBI12 battery isolator, showing the red housing with the REDARC logo and "Designed and manufactured in Australia" text, along with the main terminals and wiring connections.

Foto nke 4.1.2: Akụkụ view of the REDARC Smart Start SBI12, illustrating the compact design and the robust terminals with protective caps.

REDARC Smart Start SBI12 alternate side view

Foto nke 4.1.3: Akụkụ ọzọ view of the REDARC Smart Start SBI12, highlighting the wiring connections including the ground wire labeled "GND".

4.2 eserese waya

The following diagram illustrates a standard installation for the Smart Start SBI12 in a dual battery system.

Smart Start standard installation wiring diagram

Foto nke 4.2.1: Standard installation wiring diagram for the REDARC Smart Start SBI12. It shows the connection between the start battery and the auxiliary battery via the SBI12, with fuses on both positive lines and ground connections for both batteries and the isolator.

Connect the primary battery positive terminal to one of the main terminals on the SBI12 via a suitably rated fuse.
Connect the auxiliary battery positive terminal to the other main terminal on the SBI12 via a suitably rated fuse.
Connect the thin black wire from the SBI12 to a good chassis ground point.
Ensure all connections are clean, tight, and protected from environmental elements.
Use appropriate gauge wiring for the expected current draw (e.g., #4 pure copper wire for 60A fuse as suggested by a user review, but always refer to specific wiring guidelines for your application).

4.3 Nyochaa nwụnye tupu etinye ya

Verify that both the start and auxiliary batteries are in good condition.
Confirm that the vehicle's charging system is functioning correctly.
Gather all necessary tools and materials, including fuses, wiring, terminals, and mounting hardware.

5. Ntuziaka ọrụ

The REDARC Smart Start SBI12 operates automatically to manage your dual battery system.

Automatic Engagement: When the vehicle's engine is running and the primary (start) battery reaches a sufficient charge level (typically around 13.2V for 12V systems), the SBI12 will automatically engage, connecting the auxiliary battery to the charging system. This allows the auxiliary battery to be charged.
Automatic Disengagement: When the engine is turned off and the primary battery voltage drops below a preset threshold (typically around 12.7V), the SBI12 will disengage, isolating the auxiliary battery. This prevents the auxiliary battery from drawing power from the primary battery, ensuring the primary battery remains charged for starting the vehicle.
Emergency Start/Bridging Function: Some SBI12 models may include a manual override or emergency start feature, allowing you to temporarily bridge the two batteries. Consult your specific product documentation or REDARC support for details on this function if present.
Ihe ngosi LED: The SBI12 features an LED indicator that provides visual feedback on its operational status and any detected faults. Refer to the troubleshooting section for interpreting LED signals.

6. Nlekọta

The REDARC Smart Start SBI12 is designed for minimal maintenance. However, periodic checks are recommended to ensure optimal performance:

Nlele anya: Regularly inspect the unit and all wiring connections for signs of corrosion, damage, or loose terminals.
Ịdị ọcha: Keep the unit free from dirt, dust, and moisture. Use a dry cloth for cleaning.
Terminal Checks: Ensure all battery terminals and connections to the SBI12 are clean and tight.
Nyocha fuse: Periodically check the fuses in the positive lines to both batteries for continuity and proper rating.

7. Nchọpụta nsogbu

The SBI12 incorporates fault detection and an LED indicator to assist with troubleshooting.

Symptom / LED Indication	Ihe nwere ike ime	Ngwọta
SBI12 not engaging (auxiliary battery not charging)	Primary battery voltage dị ala. Njikọ ndị rụrụ arụ ma ọ bụ ndị mebiri emebi. Fọpụ gbawara agbawa. Faulty ground connection.	Check primary battery charge. Inspect and clean all connections. Lelee ma dochie fiusi ma ọ bụrụ na ọ dị mkpa. Verify ground connection integrity.
LED indicates fault (e.g., flashing pattern)	Voltage drop detected. N'elu voltage ọnọdụ. Excessive current draw. Mmejọ nke ime.	Check wiring for resistance, ensure proper gauge. Verify vehicle charging system output. Reduce load on auxiliary battery or check for short circuits. Contact REDARC support if issues persist after checking external factors.
SBI12 remains engaged when engine is off	Ngalaba na-adịghị mma. Wiring na -ezighi ezi.	Chọpụta waya ahụ site na eserese. Contact REDARC support.

For detailed fault code interpretations or persistent issues, refer to the official REDARC documentation or contact their technical support.

8. Nkọwapụta

Nọmba nlereanya	SBI12
Ụdị	REDRC
Voltage	12 volts DC
Ogo na-aga n'ihu	100 Amps
Ibu Ibu	9.1 ounces (ihe dị ka gram 258)
Akụkụ ngwugwu	3.7 x 2.99 x 2.95 sentimita (ihe dịka 9.4 x 7.6 x 7.5 cm)
Nọmba nke onye nrụpụta	SBI12

9. Akwụkwọ ikike na nkwado

For specific warranty information, please refer to the documentation provided with your REDARC Smart Start SBI12 or visit the official REDARC websaịtị.

If you require technical assistance, have questions about installation, or need help choosing the best dual battery setup for your needs, REDARC offers support resources.

REDARC Support:

Gaa leta onye ọrụ ahụ REDARC Store on Amazon maka ozi ngwaahịa.
Consult the free REDARC dual battery selector tool (external link, check REDARC website for current URL).
Contact REDARC directly through their official websaịtị maka nkwado teknụzụ.

	REDARC Smart Start SBI Smart Battery Isolator Installation and User Manual Comprehensive guide to the REDARC Smart Start SBI Smart Battery Isolator, covering product function, safety warnings, installation, wiring diagrams, fault indication, troubleshooting, FAQs, and technical specifications. Essential for multi-battery vehicle systems.
	REDARC Smart Start Battery Isolator SBI12, SBI24, SBI212, SBI224 - Installation, Operation, and Safety Manual Comprehensive guide for the REDARC Smart Start Battery Isolator, covering models SBI12, SBI24, SBI212, SBI224, and dual sensing variants. Includes specifications, installation instructions, wiring diagrams, fault diagnosis, FAQs, safety precautions, and warranty information.
	REDARC BCDC and SBI Wiring Diagrams for Dual Battery and Jump Start Systems Detailed wiring diagrams for REDARC BCDC1240, BCDC2420, and SBI12 units, illustrating dual battery configurations, parallel/series connections, and 12V/24V jump start setups.
	Ngwa nrụnye GPC maka REDRC ALPHA R 50A - INEOS GRENADIER Ntuziaka nwụnye Ntuzi nrụnye zuru ezu maka ngwa mgbanye GPC maka sistemu batrị REDRC ALPHA R 50A, kpọmkwem maka ụgbọ ala INEOS GRENADIER. Gụnyere ntuziaka site-nzọụkwụ, ịdọ aka ná ntị nchekwa, yana nkọwa inye ọrụ.
	REDRC 12V ruo 24V Single Circuit Voltage Boosters: VI180D, VI360D, VI720D akwụkwọ ntuziaka onye ọrụ Akwụkwọ a na-enye nkọwa zuru ezu, atụmatụ, ntụzịaka nwụnye, na ozi akwụkwọ ikike maka REDRC's VI Series 12V ruo 24V Single Circuit Vol.tage Boosters, gụnyere ụdị VI180D, VI360D, na VI720D.
	REDARC ALPHA 50 BCDC Ntuziaka nwụnye Ntuziaka nwụnye maka REDRC ALPHA 50 BCDC igwe igwe na-ebunye sistemu batrị abụọ, na-enye ntuziaka nzọụkwụ site na nzọụkwụ, ngwaọrụ ndị achọrọ, ihe ndị agụnyere, yana ntuziaka wiring maka ngwa ụgbọ ala.

REDARC SBI12