ATEN VE8950T 4K HDMI Over IP Transmitter

1. Okwu mmalite

The ATEN VE8950T is a 4K HDMI Over IP Transmitter designed for extending 4K audio/video signals over a standard Gigabit Ethernet network. This device delivers visually lossless 4K AV signals with low latency, making it suitable for long-distance transmission in various professional environments. Its design focuses on ease of setup and operation, providing a scalable and flexible solution for multi-display 4K signal distribution.

The VE8950T offers an economical digital signage solution, addressing common challenges in AV over IP system implementation. Key benefits include limitless scalability, flexible deployment, simplified IP setup without the need for additional server PCs or software, and support for daisy-chaining to extend reach efficiently.

2. Atụmatụ igodo

• 4K HDMI Over IP Extender: Functions as a transmitter for extending HDMI signals over an IP network.
• Mbufe vidiyo dị oke mma: Supports visually lossless video up to 4K at 60 Hz (4:2:0) and 4K at 30 Hz (4:4:4).
• Mgbakọ vidiyo dị elu: Utilizes ATEN's advanced video lossless compression technology for stunning video quality.
• EDID Expert Technology: Automatically selects optimal EDID settings for smooth power-up, high-quality display, and best video resolution across various screens.
• Flexible AV Connections: Extends AV connections from simple point-to-point to complex multi-point to multi-point setups via LAN, without distance limitations.

3. Nkọwa ngwaike

3.1. Ogwe Ihu

Foto 1: Front Panel of the ATEN VE8950T Transmitter.

• HDMI NA: Connects to the HDMI source device.
• Audio na: Jack 3.5mm maka ntinye ọdịyo analọgụ.
• IR: 3.5mm jack for IR receiver connection.
• RS-232: Serial port for control and configuration.
• USB: USB Type B port for connecting to a computer or other USB host device.

3.2. Ogwe azụ

Foto 2: Rear Panel of the ATEN VE8950T Transmitter.

• LAN: RJ-45 Ethernet port for network connection.
• DC5V: Power input jack for the 5V DC power adapter.

3.3. Oke panel

Foto 3: Top Panel of the ATEN VE8950T Transmitter.

• ID NUMBER Display: Three-digit LED display showing the device's ID.
• +/- bọtịnụ: Used to adjust the device ID or navigate menu options.
• LED njikọ: Indicates network link status.
• Ike Ikanam: Na-egosi ọkwa ike.

4. Ntọala na nwụnye

Follow these steps to set up your ATEN VE8950T Transmitter:

1. Gbanyụọ ngwaọrụ: Ensure all devices, including the HDMI source, display, and the VE8950T, are powered off before making any connections.
2. Jikọọ HDMI Isi mmalite: Use an HDMI cable to connect your HDMI source device (e.g., Blu-ray player, PC) to the HDMI n'ime port on the VE8950T Transmitter.
3. Njikọ netwọk: Connect an Ethernet cable from your Gigabit network switch to the LAN port on the VE8950T Transmitter. Ensure the network switch supports Gigabit speeds.
4. Njikọ ike: Connect the provided 5V DC power adapter to the DC5V port on the VE8950T Transmitter, then plug the adapter into a power outlet.
5. Ike Na: Power on the VE8950T Transmitter. The IKE LED should illuminate.
6. Configure ID (Optional): If using multiple transmitters and receivers, configure the unique ID for each transmitter using the +/- buttons on the top panel. This ID must match the ID set on the corresponding receiver(s).
7. Connect Receiver (Sold Separately): For a complete system, connect a compatible ATEN VE8950R Receiver (sold separately) to your display and the same network.
8. Power On Source and Display: Power on your HDMI source device and the display.

For advanced configurations, including web GUI management and video wall setups, refer to the comprehensive user manual available on the ATEN websaịtị.

5. Ọrụ

Once the VE8950T Transmitter and its corresponding receiver(s) are properly connected and powered on, the system will automatically begin transmitting the HDMI signal over the IP network.

• Mbufe mgbaàmà: The HDMI video and audio from the source connected to the VE8950T will be extended to the display connected to the receiver.
• Ndị Na-egosi Ọnọdụ: Lelee ya Njikọ na IKE LEDs on the top panel. The POWER LED should be solid, and the LINK LED should indicate active network connection and data transmission.
• Web GUI Management: The VE8950T supports management via a web-based Graphical User Interface (GUI). Access the web GUI by entering the device's IP address into a web browser on a computer connected to the same network. The web GUI allows for advanced configuration, monitoring, and control, including video wall setup and firmware updates.
• Njikwa RS-232: The RS-232 port can be used for serial control from a control system. Refer to the detailed product manual for RS-232 command protocols.
• Njikwa IR: If an IR receiver is connected, you can extend IR remote control signals from the display location back to the source device.

6. Nlekọta

To ensure optimal performance and longevity of your ATEN VE8950T Transmitter, follow these maintenance guidelines:

• Nhicha: Jiri akwa dị nro dị nro hichaa ngwaọrụ ahụ. Ejila ihe nhicha mmiri ma ọ bụ ikuku ikuku.
• Igwe ikuku: Ensure proper ventilation around the device to prevent overheating. Do not block any ventilation openings.
• gburugburu: Operate the device within the specified temperature and humidity ranges. Avoid exposing it to direct sunlight, excessive dust, or moisture.
• Mmelite femụwe: Periodically check the ATEN website for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and resolve potential issues.
• Njikwa USB: Ensure all cables are securely connected and properly routed to prevent accidental disconnections or damage.

7. Nchọpụta nsogbu

If you encounter issues with your ATEN VE8950T Transmitter, refer to the following troubleshooting tips:

If the problem persists, please contact ATEN technical support for further assistance.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

ATEN is committed to providing high-quality products and excellent customer service. For support regarding your VE8950T Transmitter, please refer to the following:

• Nkwado ndị teknuzu: ATEN offers free technical support. For assistance, please contact ATEN's support team. They aim to respond to customer inquiries within 4 hours.
• Ọrụ ikike: Information regarding standard warranty coverage and extended warranty service packages can be found on the official ATEN websaịtị ma ọ bụ site na ịkpọtụrụ ọrụ ndị ahịa.
• Ọrụ RMA: ATEN provides localized repair centers for Return Merchandise Authorization (RMA) services.
• Akụrụngwa dị n'ịntanetị: Visit the official ATEN website for product documentation, FAQs, driver downloads, and firmware updates.

For the most current and detailed warranty information, please visit the ATEN Official Store ma ọ bụ ụlọ ọrụ ha websaịtị.