Okwu mmalite
Daalụ maka ịzụrụasing the AXESS SPBT1074 Portable Bluetooth Speaker. This device is designed to provide high-quality audio playback from various sources, including Bluetooth-enabled devices, USB drives, Micro SD cards, and FM radio. It features a built-in rechargeable battery for portability and a subwoofer for enhanced bass. Please read this manual carefully to ensure proper use and to maximize your listening experience.
Njirimara ngwaahịa
- Bluetooth enabled speaker for wireless streaming of music from other Bluetooth enabled devices, with a 30-foot range.
- Built-in FM radio, USB support, and Micro SD card support.
- Horn size: 1.4-inch, Horn output: 2 watts x 1.
- Subwoofer: 3-inch, Subwoofer output: 8 watts.
- Built-in 1500 mAh lithium rechargeable battery for 4-6 hours of play time.
- Built-in strap for easy portability.
Image: The AXESS SPBT1074 speaker, showcasing its compact design and integrated carrying strap.
Ihe ngwugwu
- AXESS SPBT1074 Portable Bluetooth Speaker
- Igwe nchaji USB
- Akwụkwọ ntuziaka (akwụkwọ a)
Njikwa na ọdụ ụgbọ mmiri
Familiarize yourself with the control panel and ports located on the speaker.
Image: Detailed infographic of the speaker's rear panel, highlighting the functions of each control and port.
Image: A close-up of the speaker's control panel, providing a clear view of the input ports and playback buttons.
- DC5V (Charging Port): Connect the USB charging cable here to recharge the speaker's internal battery.
- Oghere Micro SD: Insert a Micro SD card (TF card) with MP3 audio files maka ịkpọghachi ozugbo.
- Ọdụ ụgbọ mmiri USB: Insert a USB flash drive with MP3 audio files maka ịkpọghachi ozugbo.
- Ọdụ ụgbọ mmiri AUX: Connect external audio devices (e.g., smartphones, MP3 players) using a 3.5mm audio cable.
- Gbanyụọ/gbanyụọ Slide to power the speaker on or off.
- ◄◄ (Previous/Rewind): Short press to go to the previous track. Long press to rewind the current track (in USB/Micro SD mode) or decrease FM frequency (in FM mode).
- ►▌▌ (Play/Pause): Press to play or pause audio playback. In FM mode, long press to auto-scan and save FM stations.
- ►► (Next/Fast-Forward): Short press to go to the next track. Long press to fast-forward the current track (in USB/Micro SD mode) or increase FM frequency (in FM mode).
- M (Ụdị): Press to switch between Bluetooth, FM Radio, USB, Micro SD, and AUX input modes.
Melite
1. Nchaji mbụ
Before first use, fully charge the speaker for approximately 3-4 hours. Connect the supplied USB charging cable to the DC5V port on the speaker and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off when fully charged.
2. Ịgbanye / gbanyụọ
Slide the ON/OFF switch to the 'ON' position to power on the speaker. You will hear an audible prompt indicating the speaker is ready. Slide the switch to the 'OFF' position to power off the speaker.
Ntuziaka ọrụ
Ọnọdụ Bluetooth
- Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by an audible prompt.
- Kwado Bluetooth na ngwaọrụ mkpanaka gị (smartphone, tabletị, wdg).
- Chọọ maka available Bluetooth devices and select 'SPBT1074' from the list.
- Once paired, you will hear a confirmation tone. You can now stream audio wirelessly from your device to the speaker.
- Use the speaker's Play/Pause, Previous/Rewind, and Next/Fast-Forward buttons, or your device's controls, to manage playback.
Ọnọdụ redio FM
- Power on the speaker and press the 'M' (Mode) button repeatedly until you hear the FM radio prompt.
- Long press the Play/Pause (►▌▌) button to initiate an automatic scan for FM stations. The speaker will scan and save all available stations.
- Short press the Previous (◄◄) or Next (►►) buttons to navigate through the saved stations.
- For manual tuning, long press the Previous (◄◄) or Next (►►) buttons to fine-tune the frequency.
USB/Micro SD Card Mode
- Ike na ọkà okwu.
- Insert a USB flash drive or a Micro SD card (pre-loaded with MP3 audio files) into the respective port. The speaker will automatically switch to USB or Micro SD mode and begin playback.
- If it does not switch automatically, press the 'M' (Mode) button to select the correct mode.
- Use the Play/Pause, Previous/Rewind, and Next/Fast-Forward buttons to control playback.
AUX ntinye ọnọdụ
- Ike na ọkà okwu.
- Connect one end of a 3.5mm audio cable (not included) to the AUX port on the speaker and the other end to the audio output jack of your external device.
- Press the 'M' (Mode) button to switch to AUX mode.
- Control audio playback directly from your connected external device.
Ịchaji batrị
The AXESS SPBT1074 speaker is equipped with a built-in rechargeable lithium battery. When the battery is low, the speaker may emit an audible warning or the sound quality may degrade. To charge:
- Connect the small end of the USB charging cable to the DC5V port on the speaker.
- Connect the large end of the USB charging cable to a standard USB power source (e.g., a 5V USB wall adapter, computer USB port).
- Ọkụ na-egosi nchaji ga-enwu n'oge ịchaji.
- Once fully charged, the indicator light will turn off. Disconnect the charging cable.
A full charge typically takes 3-4 hours and provides 4-6 hours of playback time, depending on volume level and usage.
Nlekọta
- Nhicha: Jiri akwa dị nro dị nro hichaa mpụta ọkà okwu. Ejila ihe nchacha abrasive, waxes, ma ọ bụ ihe mgbaze.
- Nchekwa: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery periodically to maintain its lifespan.
- Mkpughe mmiri: This speaker is not waterproof. Avoid exposing it to rain, moisture, or splashing liquids.
- Mmetụta: Avoid dropping the speaker or subjecting it to strong impacts, as this can damage internal components.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ọkà okwu anaghị agba ọkụ. | Batrị agwụla. | Charge the speaker for at least 3-4 hours. |
| Enweghị ụda. | Volume is too low; incorrect mode selected; device not connected properly. | Increase volume on speaker and connected device. Press 'M' to select correct mode. Reconnect Bluetooth device or AUX cable. |
| Ngwaọrụ Bluetooth enweghị ike ijikọ. | Ọkà okwu adịghị n'ụdị njikọta; ngwaọrụ tere aka; nnyonye anya. | Ensure speaker is in Bluetooth mode. Move device closer to speaker (within 30 feet). Turn off other Bluetooth devices. |
| Nnabata redio FM na-adịghị mma. | Mgbaàmà na-adịghị ike; nnyonye anya gburugburu ebe obibi. | Reposition the speaker. Try auto-scanning again. |
| USB/Micro SD playback issues. | Enweghị nkwado file usoro; rụrụ arụ files; improper insertion. | Gbaa mbọ hụ files are MP3 format. Reinsert the USB drive/Micro SD card. Try a different USB drive/Micro SD card. |
Nkọwapụta
- Ụdị: SPBT1074
- Akara: Anyụike
- Ụdị ọkà okwu: Subwoofer
- Mpaghara mpi: 1.4 sentimita asatọ
- Horn Output: 2W x 1
- Size subwoofer: 3 sentimita asatọ
- Mmepụta Subwoofer: 8W
- Mkpokọta Wattage: 8 watt
- Ogologo Bluetooth: Ruo 30 ụkwụ (mita 10)
- Batrị: 1500 mAh Lithium Ion (rechargeable)
- Oge egwuregwu: 4-6 awa (ihe dị ka.)
- Oge nchaji: 3-4 awa (ihe dị ka.)
- Ọdụ mbata: DC5V (charging), Micro SD, USB, AUX (3.5mm)
- Ụkpụrụ mmepụta ụda: Stereo
- Akụkụ ngwaahịa: 26.04 x 9.53 x 8.89 cm
- Ibu ihe: 635 g
Ozi nchekwa
- Ewepụla ọkà okwu na oke okpomọkụ, ìhè anyanwụ kpọmkwem, ma ọ bụ oke iru mmiri.
- Do not disassemble, repair, or modify the unit. This will void the warranty and may cause damage or injury.
- Mee ka ọkà okwu nọrọ n'ebe ndọta siri ike.
- Do not use the speaker while driving or operating heavy machinery.
- Dispose of the battery and speaker responsibly according to local regulations. Do not dispose of in household waste.
- Zere ige ntị n'ogo dị elu ruo ogologo oge iji gbochie mmebi ntị.
Akwụkwọ ikike na nkwado
This product is covered by a standard manufacturer's warranty. For specific warranty terms, conditions, and support inquiries, please refer to the documentation provided with your purchase or contact Axess customer service. Keep your proof of purchase for warranty claims.
