SW-Motech STP.08.868.10000/B Sturzpad Kit Instruction Manual

1. Ngwaahịa gafereview

The SW-Motech STP.08.868.10000/B Sturzpad Kit is designed to provide additional protection for the frame, engine, and fairing of Kawasaki Z900 (2016) and Z900RS (2017) motorcycles. These crash pads feature CNC-milled, metal-free abrasive pads made from durable polyamide, engineered to reduce potential damage during a fall. The optimized surface is designed to offer a better gliding effect compared to traditional crash pads.

2. Ozi nchekwa

• Always ensure the motorcycle is stable and securely supported before beginning installation.
• Yiri akụrụngwa nchedo onwe nke kwesịrị ekwesị (PPE) mgbe ị na-etinye ya.
• If you are unsure about any step of the installation process, consult a qualified motorcycle mechanic.
• Ensure all fasteners are tightened to the manufacturer's specified torque values. Over-tightening or under-tightening can lead to component failure.
• Keep all parts and tools away from children and pets.

3. Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

• 2 x Sturzpads (for left and right side)
• Mounting material (fasteners, spacers, etc.)
• Mounting instructions (this document)

4. Ntuziaka nwụnye

The Sturzpad kit is designed for quick and easy assembly, utilizing original attachment points on the motorcycle frame. Follow these general steps:

1. Kwadebe ọgba tum tum: Park the motorcycle on a level surface and secure it using a stand. Ensure the engine is cool.
2. Chọpụta ebe mgbago: Locate the designated attachment points on the motorcycle frame for the crash pads. These are typically existing bolt locations.
3. Panel Cut-out (if applicable): For some motorcycle models, it may be necessary to make a small cut-out in the fairing panel to accommodate the crash pad and mounting plate. Refer to the specific instructions provided with the kit for precise measurements and location. Use an appropriate tool for this task to ensure a clean cut and sufficient clearance.
4. Tinye ngwaike Mounting: Secure the mounting brackets/plates to the frame using the provided fasteners. Do not fully tighten at this stage.
5. Install Sturzpads: Attach the polyamide Sturzpads to the mounting hardware. Ensure they are correctly oriented (left and right sides).
6. Mmechi ikpeazụ: Once both Sturzpads are in place and aligned, progressively tighten all fasteners to the recommended torque specifications.
7. Nyochaa: After installation, visually inspect all components to ensure they are securely fastened and do not interfere with any moving parts or controls of the motorcycle.

Foto 1: nso nso view of the SW-Motech Sturzpad installed on a motorcycle frame, showing its robust design and integration with the engine area.

5. Nlekọta

To ensure the continued effectiveness and safety of your SW-Motech Sturzpad Kit, perform the following maintenance checks:

• Nyocha oge niile: Periodically check the crash pads and their mounting hardware for any signs of damage, wear, or looseness.
• Ike nke ihe njide: Ensure all mounting bolts remain securely tightened. Re-tighten if necessary, adhering to recommended torque values.
• Nhicha: Clean the crash pads with a mild soap and water solution. Avoid harsh chemicals that may damage the polyamide material.
• Ndochi: The metal-free abrasive pads are designed to be easily replaceable in case of damage. Contact SW-Motech or an authorized dealer for replacement parts.

6. Nchọpụta nsogbu

If you encounter any issues with your Sturzpad Kit, consider the following:

• Ngwa ndị tọgbọrọ chakoo: If any part of the Sturzpad feels loose, re-check the tightness of all mounting bolts.
• Na-ekwesịghị ekwesị: Double-check that the correct kit for your specific motorcycle model (Kawasaki Z900 2016 or Z900RS 2017) has been installed. Review the installation steps carefully.
• Mkpọtụ na-adịghị ahụkebe: Ensure no part of the Sturzpad or its mounting hardware is making contact with other motorcycle components during operation.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

For specific warranty information or technical support regarding your SW-Motech Sturzpad Kit, please refer to the official SW-Motech websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ozugbo. Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.