Diversitech FP-22 Condensate Removal Pump User Manual

1. Okwu mmalite

This manual provides essential instructions for the installation, operation, and maintenance of the Diversitech FP-22 Condensate Removal Pump. The FP-22 is designed to efficiently manage condensate water from furnaces and boilers, particularly in applications involving acidic and high-temperature conditions, up to 190°F (88°C).

Key features include a 22-foot maximum lift, steam-resistant electronics, vibration-dampening rubber feet, metal hang tabs for secure mounting, a built-in safety overflow switch, a check valve, and LED status indicators. The pump comes with four inlet holes, integrated P-traps, and 20 feet of 3/8" discharge tubing for a complete setup.

Foto 1.1: Akụkụ ihu view of the Diversitech FP-22 Condensate Removal Pump. This image shows the overall design of the pump, including the red base and black motor housing.

2. Ozi nchekwa dị mkpa

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death.

• Wepụ ike gị na ngwaọrụ ahụ mgbe niile tupu ị rụọ ọrụ ma ọ bụ rụzie ya.
• Ensure the pump is installed by a qualified professional in accordance with local electrical and plumbing codes.
• Ejila ọkpọkọ ahụ rụọ ọrụ ma ọ bụrụ na eriri ọkụ ma ọ bụ plọg ahụ emebie.
• This pump is designed for condensate removal only. Do not use it for flammable liquids or other applications.
• Debe aka na ihe ndị mba ọzọ ka ha ghara ịgagharị.
• The pump is rated for 120V. Ensure the power supply matches this requirement.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

• Diversitech FP-22 Condensate Removal Pump (120V)
• 20 feet of 3/8" discharge tubing
• Akwụkwọ ntuziaka nwụnye na ọrụ (akwụkwọ a)

4. Ntuziaka nwụnye

4.1 Ịkwanye mgbapụta

The FP-22 pump can be mounted on a flat surface or suspended using the integrated metal hang tabs. For optimal noise reduction and stability, utilize the vibration-dampening rubber feet.

• Choose a stable, level location near the condensate source.
• If suspending, ensure the mounting surface is secure and can support the pump's weight when full.

Foto 4.1: Akụkụ view of the FP-22 pump, highlighting the metal hang tabs for secure mounting.

4.2 Condensate Inlet Connection

The pump features four inlet holes with built-in "P" traps. Connect the condensate drain line from your furnace or boiler to one of these inlets.

• Ensure a tight, leak-free connection.
• The integrated P-traps prevent odors and gases from entering the system.

4.3 Discharge Line Connection

Connect the provided 3/8" discharge tubing to the pump's discharge outlet. Route the tubing to a suitable drain location, ensuring a continuous downward slope if possible, or a clear path for the pump to lift the water.

• Avoid kinks or sharp bends in the discharge tubing.
• Secure the tubing to prevent accidental dislodgement.
• The pump includes a check valve to prevent backflow.

Foto 4.2: Elu view of the FP-22 pump, illustrating the four inlet ports and the discharge connection point.

4.4 Njikọ eletrik

Connect the pump's power cord to a dedicated 120V electrical outlet. Ensure the outlet is properly grounded and protected by a circuit breaker.

• Ejila eriri ndọtị.
• Hụ na ọkọnọ ike ahụ dabara na vol nke ọkpọkọ ahụtage chọrọ.

5. Ọrụ

The Diversitech FP-22 operates automatically. When condensate water fills the reservoir to a predetermined level, the internal float switch activates the pump, which then discharges the water through the discharge tubing. Once the water level drops, the pump deactivates.

5.1 LED egosi

The pump is equipped with LED indicators to provide status updates:

• Igwe ọkụ ọkụ: Indicates the pump is receiving electrical power.
• Gbaa ọkụ LED: Illuminates when the pump motor is actively running.
• Oti mkpu LED: Activates if the water level reaches the high-level safety overflow switch, indicating a potential issue.

5.2 Safety Overflow Switch

A built-in safety overflow switch provides an additional layer of protection. If the water level rises above the normal operating range, this switch will activate, typically shutting down the connected HVAC equipment to prevent overflow and water damage. Consult your HVAC system's manual for wiring instructions for this safety feature.

6. Nlekọta

Ndozi mgbe niile na-eme ka arụmọrụ dị mma na-agbatị ndụ nke mgbapụta condensate gị.

6.1 Nhicha oge

• Kwụpụ ike: Always unplug the pump from the electrical outlet before cleaning.
• Drain Reservoir: Remove any remaining water from the reservoir.
• Ebe nchekwa dị ọcha: Use a mild detergent and warm water to clean the inside of the reservoir, removing any sludge or debris. Pay attention to the float switch mechanism to ensure it moves freely.
• Nyochaa Tubing: Check the inlet and discharge tubing for blockages or signs of wear.
• Gbakọtaghachi: Reconnect all tubing and plug the pump back into the power outlet.

Perform this cleaning at least once every six months, or more frequently if the condensate quality is poor or the pump is in heavy use.

7. Nchọpụta nsogbu

This section addresses common issues you might encounter with your FP-22 condensate pump.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information and technical support, please refer to the official Diversitech websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha. Debe nnata nzụta gị ka ihe akaebe nke ịzụrụ.

Onye nrụpụta: Ụlọ ọrụ DiversiTech Corp

Websaịtị: www.diversitech.com (Ọpụample njikọ, ezigbo njikọ nwere ike ịdị iche)

For service or parts, please contact a qualified HVAC technician or the manufacturer directly.