1. Okwu mmalite
This manual provides detailed instructions for the GANA HS-PT-1080P 3-Port HDMI Switch. This device allows you to connect up to three HDMI source devices to a single HDMI display, eliminating the need to constantly swap cables. It supports Full HD 1080p resolution and 3D video, ensuring optimal and lossless signal transmission.
Atụmatụ gụnyere:
- Supports Full HD 1080p (1920x1080P) and 3D video.
- 3 HDMI input ports and 1 HDMI output port.
- Plug and Play operation; no external power required.
- Gold-plated connectors for enhanced signal performance.
- HD Audio and HDCP compliant.
2. Ngwaahịa gafereview
The GANA HS-PT-1080P HDMI Switch is designed for simplicity and efficiency. It features three HDMI input ports, one HDMI output cable, and a manual selection button with corresponding LED indicators to show the active input.
2.1 Akụkụ
- HDMI Input Ports (x3): Connect your source devices (e.g., game console, Blu-ray player, laptop).
- HDMI Output Cable (x1): Connects to your display device (e.g., TV, monitor, projector).
- Họrọ bọtịnụ: Used to manually switch between the connected HDMI input sources.
- LED Indicators (x3): Light up to indicate which HDMI input port is currently active.
3. Nhazi ntuziaka
Follow these steps to set up your GANA HDMI Switch:
- Jikọọ Mmepụta: Plug the integrated HDMI output cable from the GANA HDMI Switch into an available HDMI input port on your display device (TV, monitor, or projector).
- Jikọọ Ngwaọrụ Ntinye: Connect your HDMI source devices (e.g., TV Box, Xbox, PlayStation, PC, Blu-ray player) to the HDMI Input 1, Input 2, and Input 3 ports on the GANA HDMI Switch.
- Ike Na: Ensure all connected devices and your display are powered on. The HDMI switch is 'Plug and Play' and draws power directly from the connected HDMI sources, so no external power adapter is needed.
- Họrọ isi mmalite: Use the 'Select' button on the HDMI switch to choose the desired input source. The corresponding LED indicator will illuminate to show the active input.
4. Ntuziaka ọrụ
Operating the GANA HDMI Switch is straightforward:
- Automatic Input Detection: The switch may automatically detect and switch to a newly powered-on HDMI source.
- Manual Input Selection: To switch between active HDMI sources, press the 'Select' button located on the top of the switch. Each press will cycle through the available inputs (Input 1 → Input 2 → Input 3 → Input 1).
- Ihe ngosi LED: Observe the LED indicators (1, 2, 3) next to the 'Select' button. The illuminated LED corresponds to the currently active HDMI input.
5. Nlekọta
To ensure the longevity and optimal performance of your GANA HDMI Switch, follow these maintenance guidelines:
- Nhicha: Use a soft, dry cloth to clean the exterior of the switch. Avoid using liquid cleaners or abrasive materials, as they may damage the device.
- Nchekwa: Store the switch in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Ijikwa: Handle the device and its connectors with care. Avoid bending or pulling the HDMI cables excessively, which can damage the internal wiring or ports.
- gburugburu: Do not expose the switch to water, moisture, or high humidity.
6. Nchọpụta nsogbu
If you encounter issues with your GANA HDMI Switch, refer to the following troubleshooting tips:
- Enweghị Foto/Akara:
- Hụ na e jikọtara eriri HDMI niile nke ọma na ngwaọrụ isi mmalite, swiichi, na ngosipụta ahụ.
- Verify that the correct input source is selected on the HDMI switch (check the LED indicator).
- Kwenye na atọrọla ihe ngosi gị na ọwa ntinye HDMI ziri ezi.
- Try connecting the source device directly to the display to rule out cable or source issues.
- Malitegharịa ngwaọrụ niile ejikọrọ (isi iyi, mgba ọkụ, ngosi).
- Flickering Picture or Poor Quality:
- Lelee maka njikọ eriri adịghị.
- Ensure you are using high-quality HDMI cables.
- Reduce the cable length if possible, especially for longer runs.
- Some devices may require a specific boot order. Try powering on the display first, then the HDMI switch, then the source device.
- Enweghị ọdịyo:
- Hụ na ntọala ọdịyo dị na ngwaọrụ isi mmalite gị bụ nke ziri ezi maka mmepụta HDMI.
- Lelee ntọala ọdịyo dị na ngwaọrụ ngosipụta gị.
- Ensure the HDMI cables support audio transmission.
- Mgbanwe Anaghị azaghachi:
- Ensure at least one HDMI source device is powered on and connected to provide power to the switch.
- Disconnect and reconnect all HDMI cables to reset the connections.
7. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | HS-PT-1080P |
| Ụdị | GANA |
| Ntinye ọdụ ụgbọ mmiri | 3 x HDMI |
| Ọdụ ụgbọ mmiri mmepụta | 1 x HDMI |
| Mkpebi akwadoro | Up to 1080p (1920x1080P), 3D |
| Ụdị njikọ | HDMI |
| Ịnye ọkụ | No external power required (powered by HDMI source) |
| Akụkụ ngwaahịa | 8.2 x 5.33 x 1.75 cm |
| Ibu ngwaahịa | 81 g |
| UPC | 601285150765 |
| Ngwa dakọtara | Most devices with an HDMI port |
8. Akwụkwọ ikike na nkwado
GANA products are designed for reliability and performance. For specific warranty information regarding your GANA HS-PT-1080P HDMI Switch, please refer to the warranty card included with your purchase or visit the official GANA websaịtị.
If you require technical assistance or have questions not covered in this manual, please contact GANA customer support through their official channels. When contacting support, please have your product model number (HS-PT-1080P) and purchase details readily available.
