Okwu mmalite
Thank you for choosing 3M SecureFit SF200 Safety Eyewear. This manual provides essential information for the proper use, maintenance, and care of your safety glasses. Please read this manual thoroughly before using the product to ensure optimal protection and longevity.
Ozi nchekwa
These safety glasses are designed to help protect eyes from moderate impact hazards. They meet the requirements of ANSI Z87.1-2010 standards for personal eye and face protection devices. Always inspect the eyewear before each use for any signs of damage, such as scratches, cracks, or loose parts. Do not use damaged eyewear. Replace immediately if damaged.
Ịdọ aka ná ntị: This product does not provide unlimited protection. It is not suitable for protection against severe impact hazards, chemical splashes, or harmful radiation. Always ensure the eyewear fits properly and covers the eyes completely.
Ngwaahịa gafereview
The 3M SecureFit SF200 Safety Eyewear features a lightweight design with 3M Pressure Diffusion Temple Technology, which allows the temples to naturally self-adjust to an individual's head size. The anti-fog coating helps maintain clear vision in humid or changing temperature environments. The gray lens is suitable for outdoor use, reducing glare and providing UV protection.
Figure 1: 3M SecureFit SF200 Safety Eyewear in its original packaging, highlighting the lightweight and self-adjusting features, and compliance with ANSI Z87.1-2010 standards.
Akụkụ ndị bụ isi:
- Anti-Fog Coating: Helps prevent fogging in various conditions.
- SecureFit Technology: Self-adjusting temples for a comfortable and secure fit.
- Nhazi dị arọ: Enhances comfort during extended wear.
- Gray Lens: Ideal for outdoor applications, offering glare reduction and UV protection.
- ANSI Z87.1-2010 Compliant: Meets industry safety standards.
Melite
No assembly is required for the 3M SecureFit SF200 Safety Eyewear. Simply remove the eyewear from its packaging. Before first use, and before each subsequent use, perform a visual inspection:
- Inspect the lenses for any scratches, cracks, or haziness that could impair vision or compromise protection.
- Check the temples (arms) for any signs of damage or stress.
- Ensure the eyewear is clean and free from debris.
If any damage is observed, do not use the eyewear. Replace it with a new pair.
Na-arụ ọrụ
To wear the 3M SecureFit SF200 Safety Eyewear:
- Hold the eyewear by the temples.
- Gently place the eyewear over your eyes, ensuring the lenses cover your entire field of vision.
- The SecureFit technology will automatically adjust the temples to provide a comfortable and secure fit without manual adjustment.
- Ensure there are no gaps between the eyewear and your face that could allow hazards to enter.
Always wear safety eyewear when working in environments where eye hazards are present. Remove eyewear carefully by holding the temples to avoid touching the lenses and transferring oils or dirt.
Nlekọta
Nhicha:
To clean your 3M SecureFit SF200 Safety Eyewear:
- Rinse the eyewear under lukewarm running water to remove loose dirt and debris.
- Apply a mild soap or lens cleaning solution.
- Gently rub the lenses and frame with a soft, lint-free cloth.
- Jiri mmiri dị ọcha sachaa nke ọma.
- Air dry or gently blot dry with a clean, soft, lint-free cloth.
Do not use abrasive cleaners, solvents, or paper towels, as these can scratch the lenses or damage the anti-fog coating.
Nchekwa:
Store the eyewear in a clean, dry place away from direct sunlight and extreme temperatures. Using a protective case or pouch can help prevent scratches and damage when not in use.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Lenses fogging up | High humidity, temperature changes, dirt/oils on lens, compromised anti-fog coating. | Clean lenses thoroughly as per maintenance instructions. Ensure proper ventilation if possible. If anti-fog coating is worn, replace eyewear. |
| Eyewear feels loose or uncomfortable | Improper fit, damaged temples. | Ensure eyewear is positioned correctly on the face. The SecureFit technology should self-adjust. If temples are damaged, replace eyewear. |
| Scratches on lenses | Improper cleaning, abrasive contact, poor storage. | Scratches cannot be removed. Replace eyewear immediately as scratches can impair vision and reduce protection. Store in a protective case. |
Nkọwapụta
- Ụdị: SF200-LV4
- Akara: 3M
- Agba oghere: Agba ntụ
- Mkpuchi: Anti-Fog
- Nkwenye: ANSI Z87.1-2010
- Ibu ihe: 1 pound
- Ngalaba: Unisex
- Onye nrụpụta: 3M
- ASIN: B075BHQFVT
- Nke mbụ dị: Disemba 6, 2016
Akwụkwọ ikike na nkwado
3M products are manufactured to high standards. For specific warranty information or technical support, please refer to the official 3M webma ọ bụ kpọtụrụ ndị ọrụ nlekọta ndị ahịa 3M ozugbo. Debe risit ịzụrụ ihe gị dị ka ihe akaebe nke ịzụrụ ihe.
Maka ozi ndị ọzọ, gaa na Ụlọ Ahịa 3M na Amazon.