WELLAND 48-Inch White Floating Shelf with Touch-Sensing LED Light Instruction Manual

1. Ozi nchekwa dị mkpa

Biko gụọ ntuziaka niile nke ọma tupu mgbakọ na iji. Jido akwụkwọ ntuziaka a maka ntụnye aka n'ọdịnihu.

• Oke ibu: The maximum weight capacity for this shelf is 10 poundEkwela ka oke a ghara imerụ ahụ ma ọ bụ mebie ya.
• Ịkwanye: Ensure the shelf is securely mounted to a wall stud or using appropriate drywall anchors for stability. Improper installation can lead to the shelf falling.
• Nchekwa batrị: Use only the specified battery type (3 x AA batteries per light, not included). Do not mix old and new batteries. Remove batteries if the product is not used for an extended period.
• Nkwanye: Avoid placing the shelf in areas with excessive moisture or direct heat sources.

2. Ihe ngwugwu

Nyochaa na akụrụngwa niile dị tupu ịmalite mgbakọ:

• Shelf x1
• Igwe ọkụ LED x2
• Accessory Bag (mounting hardware)
• Assembly Instruction (this manual)

Foto: Ofeview of the WELLAND Floating Shelf and its included components.

3. Nkọwapụta

Image: Detailed dimensions of the 48-inch floating shelf.

4. Ntọala na nwụnye

Follow these steps for proper installation of your floating shelf.

4.1. Kwadebe maka nwụnye

• Ngwa achọrọ: You will need a drill, a level, a pencil or marker, and a screwdriver for installation.
• Ebe: Choose a suitable wall location. Consider mounting into wall studs for maximum stability. If mounting into drywall, use appropriate anchors (included in the accessory bag).

4.2. Mount the Shelf

• Ịka akara: Hold the mounting bracket against the wall at the desired height and use a level to ensure it is straight. Mark the screw hole positions with a pencil.
• Ịkụ ala: Drill pilot holes at the marked positions. If mounting into drywall without a stud, insert the appropriate wall anchors.
• Ihe nkwado echekwara: Attach the mounting bracket to the wall using the provided screws. Ensure it is firmly secured.
• Tinye shelf: Slide the floating shelf onto the secured mounting bracket. The streamlined design hides the support for a clean, floating appearance.

4.3. Install LED Lights

• Open Light Unit: Twist the back cover of each LED light counter-clockwise to open it.
• Fanye batrị: Insert 3 AA batteries into each LED light unit, ensuring correct polarity.
• Ọkụ echedoro: Place the LED light units into the designated recesses on the underside of the shelf. Twist clockwise to secure them.

Image: Step-by-step guide for battery insertion and light installation.

5. Operating Instructions (LED Light)

The WELLAND Floating Shelf features touch-activated LED lights for convenient illumination.

• Agbanye/ Gbanyụọ: To activate the LED light, gently touch the center of the light unit. To turn it off, touch the center again.
• Mmepụta ọkụ: The LED lights provide a gentle glow, ideal for accent lighting or reading.

6. Nlekọta

• Nhicha: Wipe the shelf surface with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Ngbanwe batrị: If the LED lights dim or stop working, replace the 3 AA batteries in each unit. Follow the installation steps in Section 4.3 to access and replace batteries.
• Nyocha: Periodically check the mounting hardware to ensure the shelf remains securely attached to the wall.

7. Nchọpụta nsogbu

8. Akwụkwọ ikike na nkwado

For any questions, concerns, or support regarding your WELLAND Floating Shelf, please contact the manufacturer directly. Specific warranty details may vary and are typically provided with your purchase documentation.

You can visit the official WELLAND store for more information and contact options: WELLAND Store