Okwu mmalite
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Anmytek W0018 Rustic Wood Farmhouse Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Anmytek W0018 is a single-light wall sconce designed for indoor use, featuring a rustic wood accent, a metal base, and a clear bubble glass shade. It is suitable for various indoor settings such as bathrooms, bedrooms, living rooms, kitchens, and hallways.
Ozi nchekwa
- Ịdọ aka ná ntị: Always turn off the electrical supply at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Failure to do so may result in electrical shock, injury, or death.
- Consult a qualified electrician if you are unsure about the installation process or have any electrical questions.
- Gbaa mbọ hụ na njikọ eletrik niile echekwabara ma soro koodu eletriki mpaghara.
- Agafela oke wattage kpọmkwem maka bọlbụ ọkụ (60 Watts).
- This fixture is designed for indoor use only. Do not expose to moisture or use in wet locations.
- Jiri nlezianya jikwaa ihe ndị mejupụtara iko ka ọ ghara imebi.
Ihe ngwugwu
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.
- Wall Sconce Fixture Body (with wood accent and metal base)
- Bubble Glass Shade
- Mounting Hardware (mounting plate, screws, wire nuts)
- Akwụkwọ ntuziaka
Note: Light bulb is not included. An E26 base bulb (max 60W) is required.
Nkọwapụta
| Njirimara | Nkọwapụta |
|---|---|
| Ụdị | Anmytek |
| Nọmba nlereanya | W0018 |
| Ihe onwunwe | Glass, igwe, osisi |
| Ụdị | Antique, Rustic, Farmhouse |
| Ụdị ihe nrụnye ọkụ | Sconce |
| Ụdị ụlọ | Attic, Kitchen, Bathroom, Bedroom, Living Room, Hallway, Dining Room |
| Ojiji akọwapụtara | Iji ime ụlọ naanị |
| Isi Iyi Ike | Igwe ọkụ eletrik |
| Ụdị nwụnye | Ugwu mgbidi |
| Ụdị isi iyi ọkụ | Ikanam/Incandescent |
| Ụdị mmecha | Agba |
| Ihe ndò | Glass |
| Ọnụọgụ nke isi mmalite ọkụ | 1 |
| Voltage | 110 volts |
| Oke Wattage | 60 Watt |
| Isi Bulb | E26 |
| Asambodo | Edepụtara UL |
| Mgbakọ chọrọ | Ee |
| Ibu Ibu | 2.31 pound (1.05 Kilogram) |
| Akụkụ ngwugwu | 12.01 x 9.06 x 7.91 sentimita asatọ |
Akụkụ ngwaahịa
Figure 1: Product Dimensions. The fixture measures approximately 8 inches in height, 4.75 inches in width, and extends 5 inches from the wall. The glass shade is 5.5 inches high and 3.5 inches in diameter.
Ntọala na nwụnye
Before you begin, ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.
- Gbanyụọ ike: Locate the circuit breaker that supplies power to the light fixture location and turn it OFF. Verify power is off using a voltagọ bụ onye nyocha.
- Kwadebe efere mgbakwasa: Attach the mounting plate to the junction box in the wall using the provided screws. Ensure it is securely fastened.
- Njikọ waya: Carefully connect the electrical wires.
- Jikọọ akwụkwọ ndụ akwụkwọ ndụ ma ọ bụ iferi ọla kọpa waya site na nkwụnye ahụ ruo na waya ala from the junction box (usually bare copper or green) using a wire nut.
- Jikọọ waya ọcha (anọpụ iche). site na nkwụnye ahụ ruo na waya ọcha (anọpụ iche). from the junction box using a wire nut.
- Jikọọ waya ojii (ndụ). site na nkwụnye ahụ ruo na waya ojii (ndụ). from the junction box using a wire nut.
- Ugwu ihe ndozi ahụ: Carefully tuck the wires into the junction box. Align the fixture body with the mounting plate and secure it with the provided screws. The fixture can be mounted with the glass shade facing up or down, depending on your preference and location.
- Wụnye bọlbụ: Screw an E26 base light bulb (maximum 60 Watts) into the socket. Do not overtighten.
- Tinye ndò Glass: Carefully place the bubble glass shade over the bulb and secure it according to the fixture design (typically by screwing a retaining ring onto the socket).
- Weghachi ike: Turn the electrical supply back ON at the circuit breaker. Test the light fixture.
Figure 2: E26 Bulb Socket Detail. This image shows the E26 bulb socket and the mechanism for securing the glass shade.
Figure 3: Assembled Fixture Detail. This image provides a detailed view of the assembled wall sconce, showcasing its design elements.
Ntuziaka ọrụ
The Anmytek W0018 wall sconce operates via a standard wall switch (push button type, as per specifications) connected to your home's electrical system. Once installed and powered, simply use the wall switch to turn the light on or off.
- Ensure the correct E26 bulb (max 60W) is installed.
- The fixture is designed for general illumination in indoor spaces.
Figure 4: Illuminated Fixture. This image shows the wall sconce in operation, providing light.
Nlekọta
- Nhicha: To clean the fixture, ensure the power is off and the fixture is cool. Wipe the metal and wood surfaces with a soft, dry cloth. For the glass shade, a slightly damp cloth can be used, followed by a dry cloth to prevent water spots. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Ndokwa bọlbụ: Before replacing a bulb, turn off the power at the circuit breaker and allow the bulb to cool completely. Unscrew the old E26 bulb and screw in a new E26 bulb (maximum 60 Watts). Ensure the new bulb is securely seated before restoring power.
- Nyocha: Periodically inspect the fixture for any signs of wear, loose connections, or damage. If any issues are found, turn off power and consult a qualified electrician or contact customer support.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo | Enweghị ike maka nrụnye Bulb is faulty or loose Wiwi na-ezighi ezi | Lelee ihe mgbawa sekit na mgba ọkụ mgbidi. Dochie bọlbụ ahụ ma ọ bụ hụ na a kpọchiri ya nke ọma. Turn off power and check wiring connections. Consult an electrician if needed. |
| Ìhè flickers | bọlbụ rụrụ arụ Njikọ waya na-adịghị mma Mgbanwe dimmer na-ekwekọghị (ọ bụrụ na ọ dị mkpa) | Gbanyụọ bọlbụ. Gbanyụọ ike ma lelee njikọ waya. Ensure dimmer switch is compatible with the bulb type. |
| Glass shade is broken | Mmebi mberede Mmebi mbupu | Contact Anmytek customer support for a replacement. |
Akwụkwọ ikike na nkwado
The Anmytek W0018 wall sconce comes with a manufacturer-and-seller-combination warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation provided at the time of purchase or contact Anmytek customer support directly.
If you encounter any issues not covered in this manual or require further assistance, please contact Anmytek customer support. You can often find contact information on the product packaging or by visiting the official Anmytek store page online.
Maka ozi ndị ọzọ, gaa na Anmytek Store.
