Akwụkwọ ntuziaka+

RCF ART 312-A MK4

RCF ART 312-A MK4 Active Speaker User Manual

Akara: RCF | Ụdị: ART 312-A MK4 (Model 13000539)

Okwu mmalite

Thank you for choosing the RCF ART 312-A MK4 Active Speaker. This manual provides essential information for the safe and efficient operation of your new audio system. Please read this manual thoroughly before using the product to ensure proper setup, optimal performance, and to prevent damage.

The RCF ART 312-A MK4 is a high-performance active speaker designed for a wide range of professional audio applications, offering powerful sound reproduction and robust construction.

Ozi nchekwa

Always observe the following safety precautions to prevent electric shock, fire, or injury.

  • Ịnye ọkụ: Connect the speaker only to an AC power outlet of the specified voltage. Hụ na eriri ọkụ eletrik ahụ emebighị ma ọ bụ kpọchie ya.
  • Nda ala: The speaker must be properly grounded to prevent electric shock.
  • Mmiri: This product is designed to be waterproof, however, avoid exposing the speaker to excessive moisture or liquids. Do not operate with wet hands.
  • Igwe ikuku: Ensure adequate ventilation around the speaker. Do not block ventilation openings.
  • Nkwanye: Place the speaker on a stable, level surface or mount it securely using appropriate hardware. Avoid placing it near heat sources.
  • Ije ozi: Anwala ịnye ngwaahịa a n'onwe gị. Tụtụ aka n'aka ndị ọrụ ruru eru.
  • Nchedo Ntị: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the speaker at high volumes.

Melite

Follow these steps to set up your RCF ART 312-A MK4 active speaker.

1. Iwepu ngwongwo

Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage during transit. Retain the original packaging for future transportation or storage.

2. Ntinye

The ART 312-A MK4 offers versatile placement options:

  • Ogwe osisi: The speaker features a standard pole mount socket on the bottom for use with speaker stands.
  • Ndokwa ala: The speaker can be placed directly on a stable floor.
  • Stage Nyochaa: Nhazi kabinet na-enye ohere maka ojiji dịkatage nyochaa.
RCF ART 312-A MK4 Active Speaker, front-side view

Ọgụgụ 1: Akụkụ ihu view of the RCF ART 312-A MK4 speaker.

N'okpuru view of RCF ART 312-A MK4 showing pole mount socket

Onyonyo 2: N'okpuru view illustrating the integrated pole mount socket for stand placement.

3. Njikọ

Locate the input panel on the rear of the speaker (Figure 3).

N'azụ view of RCF ART 312-A MK4 showing control panel and connections

Figure 3: Rear control panel with input and output connections.

  1. Njikọ ike: Connect the supplied power cable to the AC input on the rear panel and then to a suitable grounded power outlet.
  2. Ntinye odiyo: Connect your audio source (mixer, microphone, instrument) to the balanced XLR or 1/4" Jack input. Ensure the input level switch (MIC/LINE) is set appropriately for your source.
  3. Link Output (Optional): If linking multiple speakers, use the XLR link output to send the audio signal to another active speaker.

4. Gbanwee ike mbụ

Before powering on, ensure all connections are secure and volume controls are set to minimum. Flip the power switch to the 'ON' position. The power indicator LED should illuminate.

Ntuziaka ọrụ

This section details the operation of the RCF ART 312-A MK4 speaker.

Ogwe njikwa gafereview

Refer to Figure 3 for the layout of the control panel.

  • Njikwa Nweta Nweta: Adjusts the input sensitivity for the connected audio source. Start with this control at minimum.
  • Njikwa olu: Na-achịkwa olu mmepụta zuru oke nke ọkà okwu.
  • MIC/ LINE mgba ọkụ: Selects the appropriate input sensitivity for microphone (MIC) or line-level (LINE) signals.
  • XLR/Jack Input: Combination input connector for balanced XLR or 1/4" TRS/TS cables.
  • XLR Link Output: Provides a pass-through of the input signal for connecting to other speakers.
  • Ihe ngosi LED:
    • IKE: Na-enye ọkụ mgbe agbanyere unit ahụ.
    • Akara ngosi: Na-enye ọkụ mgbe mgbama ọdịyo dị.
    • OKWU: Illuminates when the internal limiter is active, indicating the signal is approaching distortion. Reduce input gain if this LED is constantly lit.

Na-emezi ọkwa ụda

  1. Ensure the main volume control on the speaker is at its minimum setting.
  2. Set the MIC/LINE switch according to your input source.
  3. Gradually increase the input gain control until the SIGNAL LED illuminates consistently. Avoid the LIMITER LED lighting up frequently.
  4. Slowly increase the main volume control to achieve the desired listening level.

Nlekọta na nlekọta

Proper maintenance will ensure the longevity and optimal performance of your RCF ART 312-A MK4 speaker.

  • Nhicha: Use a soft, dry cloth to clean the exterior of the speaker. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the speaker grilles or control panel. Do not use abrasive cleaners or solvents.
  • Nchekwa: When not in use for extended periods, store the speaker in a dry, cool environment, preferably in its original packaging or a protective cover.
  • Ụgbọ njem: Always use the integrated handles for lifting and carrying the speaker (Figure 4). When transporting, ensure the speaker is secured to prevent movement and impact.
  • Nguzogide mmiri: While the product is waterproof, it is designed to withstand splashes and light rain. Do not submerge the speaker or expose it to heavy, continuous downpours. Always ensure input covers are properly sealed if present.
N'elu view of RCF ART 312-A MK4 showing integrated handle

Foto 4: Top view illustrating the integrated handle for easy transportation.

Nchọpụta nsogbu

If you encounter issues with your RCF ART 312-A MK4 speaker, refer to the following common problems and solutions before contacting service personnel.

Nsogbu Ihe nwere ike ime Ngwọta
Enweghị mmepụta ụda
  • Power cable not connected or power switch off.
  • Atụle njikwa olu ka ọ kacha nta.
  • Input cable faulty or disconnected.
  • Isi iyi ọdịyo anaghị eziga mgbaama.
  • MIC/LINE switch incorrect.
  • Lelee njikọ ike wee gbanwee.
  • Increase volume control.
  • Check and replace input cable if necessary.
  • Verify audio source is active and sending signal.
  • Ensure MIC/LINE switch matches source type.
Ụda agbagọ
  • Input signal too high (LIMITER LED constantly on).
  • Speaker volume too high.
  • USB na-ezighi ezi.
  • Reduce input gain from source or speaker.
  • Decrease speaker volume.
  • Nwaa eriri dị iche.
Mkpọtụ mkpọtụ ma ọ bụ mkpọtụ
  • Nsogbu nke okirikiri ala.
  • Ntinye aka sitere na ngwaọrụ eletrọnịkị ndị ọzọ.
  • USB mebiri emebi.
  • Ensure all equipment is on the same electrical circuit or use a ground loop isolator.
  • Move speaker or cables away from power transformers or dimmers.
  • Dochie eriri.

Nkọwapụta

Technical specifications for the RCF ART 312-A MK4 Active Speaker.

Aha Nlereanya ART 312 amp MK4
Nọmba Nlereanya ihe 13000539
Ụdị Ọkà Okwu Full-range active speaker with 12-inch woofer and compression driver
Ike Nwepu kacha elu 800 Watt
Isi Iyi Ike Igwe ọkụ eletrik
Ọnọdụ mmepụta ọdịyo Stereo (when used in a pair) / Mono (single unit)
Ụdị nkwụnye Pole mount, Floor, Stage Nyochaa
Akụkụ ngwaahịa (W x D x H) 40.5 x 34.5 x 68 cm
Ibu Ibu 17 n'arọ
Waterproof Ee
Ụbọchị mbụ dị 26 Julaị 2017
RCF ART 312-A MK4 with dimensions labeled

Figure 5: Dimensions of the RCF ART 312-A MK4 speaker.

Akwụkwọ ikike na nkwado

RCF products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please refer to the warranty card included with your product or visit the official RCF websaịtị maka nkọwa na usoro akwụkwọ ikike.

For technical support, service, or spare parts, please contact your authorized RCF dealer or distributor. You can also find support resources and frequently asked questions on the official RCF websaịtị.

Mara: Nkọwa ngwaahịa na atụmatụ nwere ike ịgbanwe na-enweghị ọkwa.

Akwụkwọ ndị emetụtara - ART 312-A MK4

Tupuview Akwụkwọ ntuziaka onye nwe RCF ART 7 Series: Sistemụ Ọkà Okwu Ndị Ọkachamara Na-arụ Ọrụ
Chọpụta usoro RCF ART 7, usoro sistemụ ọkà okwu ọkachamara e mepụtara maka ịdị mma ụda, ike, na ogologo oge. Akwụkwọ ntuziaka onye nwe ya na-enye ozi dị mkpa maka ntinye, ọrụ, na nchekwa.
Tupuview RCF ART 7 Series MK4: Ọkachamara Ọkachamara Sistemu Ọkachamara Akwụkwọ ntuziaka Onye nwe
Akwụkwọ ntuziaka onye nwe a na-enye ozi zuru oke maka sistemu igwe na-ekwu okwu ọkachamara RCF ART 7 Series, na-ekpuchi nchekwa nchekwa, ntuziaka ọrụ, njirimara ngwaahịa, njikọ, ntuziaka nwụnye, yana nkọwa nka zuru oke.
Tupuview Akwụkwọ ntuziaka onye nwe RCF ART 7 Series: Sistemụ Ọkà Okwu Ndị Ọkachamara Na-arụ Ọrụ
Akwụkwọ ntuziaka zuru oke nke onye nwe ya maka sistemụ ọkà okwu ọkachamara nke RCF ART 7 Series. Chọpụta atụmatụ, ntuziaka nchekwa, usoro ntinye, na nkọwapụta teknụzụ maka ụdị gụnyere ART 710-A, ART 712-A, ART 715-A, ART 732-A, ART 735-A, na ART 745-A.
Tupuview Akwụkwọ ntuziaka onye nwe RCF ART 3 Series MK III: ART 310-A, ART 312-A, ART 315-A Ndị na-ekwu okwu na-arụ ọrụ
Akwụkwọ ntuziaka nke onye nwe ya maka sistemụ ọkà okwu ọkachamara nke RCF ART 3 Series MK III. Nkọwa nchekwa, ọrụ, ozi ngwaahịa, nhazi panel azụ, ntinye, ihe ngosi ọdịda, nkọwapụta, na nkọwa kọntaktị RCF maka ụdị ART 310-A ​​MK III, ART 312-A MK III, na ART 315-A MK III.
Tupuview RCF ART Series Professional Active Speaker Systems | ART 310-A, 312-A, 315-A
Comprehensive guide and technical specifications for RCF ART Series professional active speaker systems, featuring models ART 310-A, ART 312-A, and ART 315-A. Includes product philosophy, components, performance data, installation, safety, and operational guidelines.
Tupuview Akwụkwọ ntuziaka onye nwe ndị ọkachamara na-arụsi ọrụ ike nke RCF ART 9
Akwụkwọ ntuziaka zuru oke nke onye nwe ya maka RCF ART 9 Series ọkachamara na-ekwu okwu na-arụ ọrụ, na-ekpuchi nchedo nchekwa, nkọwa ngwaahịa, atụmatụ panel azụ, njikọ, ntinye, nsogbu nsogbu, na nkọwapụta teknụzụ.