Philips myLiving PONGEE LED Spot Light (Model 5058131PN) User Manual

1. Okwu mmalite

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Ozi nchekwa

Na-edebe nchekwa nchekwa ndị a mgbe niile iji gbochie mmerụ ahụ ma ọ bụ mmebi:

• Nchekwa Eletriki: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
• Eji ime ụlọ naanị: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Ụdị bọlbụ: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage gosiri na nkwụnye.
• Ijikwa: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
• Nhicha: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

• Philips myLiving PONGEE LED Spot Light fixture (1 unit)
• Akụrụngwa mgbanye (skru, plọg mgbidi)
• Akwụkwọ ntuziaka

Mara: A GU10 LED bulb is etinyeghị ya a ga-azụrịrị ya iche.

Foto nke 2: Nkwakọ ngwaahịa

4. Ntọala na nwụnye

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Figure 3: Product Dimensions (all measurements in mm)

1. Kwadebe Mpaghara Nwụnye: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
2. Kwụpụ ike: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
3. Ugwu Base: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
4. Wepu ihe ndozi ahụ: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
5. Wụnye bọlbụ: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
6. Attach the Fixture Body: Secure the main body of the spot light to the mounted base.
7. Weghachi ike: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Ntuziaka ọrụ

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

• Agbanye/ Gbanyụọ: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
• Ntuziaka ọkụ na-edozi: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Nlekọta

• Nhicha: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
• Ndokwa bọlbụ:
  1. Gbanyụọ ọkụ eletrik na mgbawa sekit.
  2. Kwe ka bọlbụ ahụ dị jụụ kpamkpam.
  3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
  4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
  5. Weghachi ike.

7. Nchọpụta nsogbu

8. Nkọwapụta

• Akara: Philips Lighting
• Nọmba nlereanya: 5058131PN
• Akụkụ ngwaahịa (L x W x H): 10 x 13.8 x 8.2 cm
• Ibu ihe: 345 grams
• Ihe: Ọla
• Agba: Ọcha
• Ụdị: Oge a
• Ụdị isi iyi ọkụ: Ikanam
• Bulb Socket Type: GU10
• Ọnụọgụ bọlbụ: 1 (bọlbụ anaghị etinye ya)
• Ntinye Voltage: 220-240 volts
• Isi mmalite ike: Electrical cable (wired)
• Ụdị nwụnye: Surface Mount (Ceiling/Wall)
• Ogo IP: IP20 (naanị ime ụlọ)
• Atụmatụ pụrụ iche: Energy-efficient, Swivel head
• Ihe eji eme ihe: Home, Bedroom, Living Room

9. Akwụkwọ ikike na nkwado

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting websaịtị ahụ. I nwekwara ike ịkpọtụrụ onye na-ere ahịa gị maka enyemaka.

Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.