1. Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your Knightsbridge IP44 180° Mini PIR Sensor, Model OS0014. This passive infrared (PIR) sensor is designed to detect motion and automatically control connected lighting or other devices, offering convenience and energy efficiency. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Ozi nchekwa
- Installation must be carried out by a qualified electrician in accordance with national wiring regulations.
- Ensure the main power supply is switched off before commencing any installation or maintenance work.
- This product is rated IP44, making it suitable for outdoor use where protection against splashing water is required.
- Do not exceed the maximum load ratings specified for this device.
- Keep the sensor lens clean and free from obstructions to ensure optimal performance.
3. Ngwaahịa gafereview
The Knightsbridge OS0014 is a compact, white, wall-mountable or ceiling-mountable PIR sensor. It features a 180° detection angle and adjustable settings for time delay and light sensitivity (LUX).
Ọgụgụ 1: N'ihu-n'akuku view of the Knightsbridge IP44 Mini PIR Sensor.
Ọgụgụ 2: N'ihu n'ihu view of the sensor, highlighting the detection lens.
Foto 3: Akụkụ view of the sensor, illustrating its compact design and wall mounting bracket.
Onyonyo 4: N'okpuru view of the sensor, showing the 'TIME' and 'LUX' adjustment dials.
4. Nwụnye na Ntọala
4.1 Ebe nrịgo
Choose a suitable location for mounting the sensor. It can be wall-mounted or ceiling-mounted. For optimal performance, consider the following:
- Avoid mounting near heat sources (e.g., air conditioning vents, heaters) that could cause false triggers.
- Ensure the detection area is clear of large obstructions.
- Mount at a height that allows for effective detection within the 4-meter range and 180° angle.
4.2 Waya
Ịdọ aka ná ntị: Electrical installation should only be performed by a qualified electrician.
- Switch off the main power supply at the consumer unit.
- Carefully open the sensor housing to access the wiring terminals.
- Connect the live, neutral, and switched live wires according to the wiring diagram provided inside the sensor or on its packaging.
- Hụ na njikọ niile dị n'udo ma nwee mkpuchi zuru oke.
- Close the sensor housing securely, ensuring the IP44 rating is maintained.
5. Ntuziaka ọrụ
After installation and power restoration, the sensor will enter a warm-up period (typically 30-60 seconds) during which it may cycle on and off. Once warmed up, you can adjust the settings using the dials located on the sensor (refer to Figure 4).
5.1 TIME Adjustment
The 'TIME' dial controls how long the connected light or device remains on after motion is detected and then ceases. The adjustable range is approximately 10 seconds to 15 minutes. Rotate the dial clockwise to increase the duration and counter-clockwise to decrease it.
5.2 LUX Adjustment
The 'LUX' dial determines the ambient light level at which the sensor will activate. This allows the sensor to operate only when it is dark enough. The adjustable range is approximately 3 LUX (dark) to 300 LUX (daylight). Rotate the dial towards the 'sun' symbol for activation in brighter conditions or towards the 'moon' symbol for activation only in darker conditions.
Ọrụ akpaaka: Once configured, the sensor will automatically detect motion within its 180° field of view and 4-meter range, activating the connected load according to the set TIME and LUX levels.
6. Nlekọta
The Knightsbridge Mini PIR Sensor requires minimal maintenance. To ensure continued optimal performance:
- Periodically clean the sensor lens with a soft, damp cloth to remove dust, dirt, or debris that may obstruct detection. Do not use abrasive cleaners.
- Ensure the sensor is free from physical damage.
7. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Sensor does not activate. | No power; LUX setting too high; TIME setting too low; obstructed sensor. | Check power supply; adjust LUX dial towards 'moon'; adjust TIME dial; clear obstructions from sensor lens. |
| Ìhè na-anọgide na-enwu. | Constant motion in detection area; wiring error; sensor fault. | Ensure no continuous motion; verify wiring connections; if problem persists, consult a qualified electrician. |
| Sensor activates without apparent motion. | Heat sources; small animals; strong air currents; sensor fault. | Relocate sensor away from heat sources or drafts; adjust detection angle if possible; if problem persists, consult a qualified electrician. |
| Detection range is poor. | Incorrect mounting height; obstructions; extreme temperatures. | Verify mounting height; remove obstructions; ensure operating within specified temperature range. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | OS0014 |
| Ụdị | Knightsbridge |
| Agba | Ọcha |
| Isi Iyi Ike | AC |
| Ibu Ibu | 0.1 Kilogram (ihe dị ka 3.52 ounces) |
| Oke nchọpụta kacha | 4 mita |
| Akụkụ nchọpụta | 180° |
| Ụdị nkwụnye | Ugwu mgbidi / Ulo elu |
| Akụkụ ngwaahịa (D x W x H) | 2.76" x 3.05" x 2.13" |
| Ihe onwunwe | Polycarbonate |
| Atụmatụ pụrụ iche | Adjustable (TIME and LUX) |
| Ogo IP | IP44 |
| Ike ịgbanwee | Max. 2000W Incandescent / Max. 1000W LED |
| Achọrọ batrị? | Mba |
9. Akwụkwọ ikike na nkwado
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Knightsbridge customer service directly. Keep your proof of purchase for any warranty claims.
