1. Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your Trust IPCAM-2000 Wi-Fi IP Surveillance Camera. Please read this manual thoroughly before using the product to ensure correct setup and optimal performance. Keep this manual for future reference.
2. Ihe ngwugwu
Chọpụta na ihe niile dị na ngwugwu:
- Trust IPCAM-2000 Wi-Fi IP Surveillance Camera
- Ihe nkwụnye ọkụ
- Nkwado mgbakwasa na kposara
- Akwụkwọ ntuziaka (akwụkwọ a)
3. Ngwaahịa gafereview
Familiarize yourself with the various components of your Trust IPCAM-2000 camera.
Foto 3.1: N'ihu View. This image shows the front of the Trust IPCAM-2000 camera, highlighting the camera lens and the integrated light sensor for automatic night vision activation.
Foto 3.2: Akụkụ View with Micro SD Card Slot. This image displays the side of the camera, clearly showing the slot for a Micro SD card, which is used for local video storage.
Ọgụgụ 3.3: N'azụ View. This image illustrates the back of the camera, featuring the 5V-1.0A power input port, the reset button, and the integrated speaker for two-way audio communication.
Isi ihe:
- Igwefoto oghere: Na-ewepụta vidiyo footage. Features a wide-angle lens for optimal viewing.
- Igwe ọkụ infrared: Provide night vision capabilities for clear images in low-light conditions.
- Oghere kaadị Micro SD: Supports Micro SD cards up to 64GB for local video recording.
- Power Input (5V-1.0A): Jikọọ na nkwụnye ọkụ gụnyere.
- Tọgharịa bọtịnụ: Used to restore the camera to factory default settings.
- Ọkà okwu agbakwunyere: Enables two-way audio communication.
- Ebe mgbago: Allows for placement on a flat surface or wall mounting.
4. Ntọala na nwụnye
4.1. Ịhọrọ ebe
Select an indoor location within range of your Wi-Fi network. Ensure the camera has a clear line of sight to the area you wish to monitor. Avoid placing the camera near heat sources or in direct sunlight.
4.2. Ike na igwefoto
- Connect the power adapter to the camera's 5V-1.0A power input port.
- Tinye nkwụnye ọkụ n'ime oghere mgbidi.
- The camera will power on, and an indicator light will show its status (refer to the app for specific light indications during setup).
4.3. Mounting the Camera (Optional)
The camera can be placed on a flat surface or mounted to a wall using the included bracket and screws. Ensure the mounting surface is stable and can support the camera's weight.
- Jikọọ ihe nkwado na-arị elu na ebe achọrọ site na iji kposara enyere.
- Secure the camera to the mounting bracket.
- Gbanwee akụkụ igwefoto ka ọ dị mkpa.
5. Ntinye na Nhazi Ngwa
The Trust IPCAM-2000 camera is controlled via a dedicated mobile application.
- Budata ngwa: Chọọ maka the "Trust Smart Home" app (or specified app in product packaging) on the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
- Wụnye wee mepee: Install the app and open it on your smartphone or tablet.
- Mebe akaụntụ: Follow the on-screen instructions to create a new user account or log in if you already have one.
- Tinye igwefoto: Within the app, select the option to add a new device. Follow the in-app wizard for easy installation. This typically involves connecting your phone to the camera's temporary Wi-Fi network, then configuring the camera to connect to your home Wi-Fi network.
- Nhazi zuru oke: Once the camera is successfully connected to your Wi-Fi, you can name the camera and access its live feed and settings.
Mara: The app provides multi-language support and guides you through each step of the setup process.
6. Ọrụ
6.1. Ndụ View
After successful setup, open the app and select your camera to view the live video feed from anywhere with an internet connection.
6.2. Ọhụụ abalị
The camera automatically switches to night vision mode in low-light conditions, utilizing its infrared LEDs to provide clear black and white video.
6.3. Audio Ụzọ Abụọ
Use the integrated speaker and microphone through the app to communicate with individuals near the camera.
- N'ime ndụ view, locate the microphone icon.
- Press and hold the icon to speak. Release to listen.
7. Ndekọ na Nchekwa
7.1. Nwụnye Kaadị Micro SD
To enable local video recording, install a Micro SD card (up to 64GB, Class 10 recommended) into the designated slot on the side of the camera.
- Ensure the camera is powered off before inserting or removing the Micro SD card.
- Jiri nwayọọ tinye Micro SD kaadị n'ime oghere ruo mgbe ọ pịrị n'ime ebe.
- Power on the camera. The app will prompt you to format the SD card if necessary.
7.2. Nhọrọ ndekọ
The app allows you to configure recording settings, including continuous recording or event-triggered recording (e.g., motion detection). Recorded clips are stored on the Micro SD card and can be accessed via the app.
8. Nchọpụta na Ọkwa Mmegharị
The camera features motion detection to alert you to activity in its field of view.
- Kwado nchọpụta ngagharị: Navigate to the camera settings within the app and enable motion detection.
- Gbanwee mmetụta: You can adjust the sensitivity level to minimize false alarms.
- Hazie ọkwa: Configure the app to send push notifications to your smartphone or tablet when motion is detected.
9. Nlekọta
9.1. Nhicha
To maintain optimal image quality, periodically clean the camera lens with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
9.2. Mmelite firmware
Check the app regularly for available firmware updates. Keeping your camera's firmware up-to-date ensures the latest features, security enhancements, and bug fixes.
10. Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Igwefoto anaghị ejikọta na Wi-Fi | Incorrect Wi-Fi password, camera too far from router, router issues. |
|
| Enweghị ndepụta vidiyo na ngwa ahụ | Camera offline, internet connection issues, app malfunction. |
|
| Nchọpụta ngagharị anaghị arụ ọrụ | Motion detection disabled, sensitivity too low, app notifications off. |
|
| Micro SD card not recording | SD card full, corrupted, or not formatted correctly. |
|
11. Nkọwapụta
| Aha Nlereanya | IPCAM-2000 |
| Nọmba Nlereanya Onye nrụpụta | 71119 |
| Teknụzụ Njikọta | Ikuku (Wi-Fi) |
| Isi Iyi Ike | AC Adapter (5V) |
| Ntinye Voltage | 5 volts |
| Wattage | 5 Watt |
| Ihe onwunwe | Plastic |
| Agba | Ọcha |
| Akụkụ (L x W x H) | 9 x 7.8 x 12 cm |
| Ibu | 248 g |
| Ojiji gburugburu | Ime ụlọ |
| Atụmatụ pụrụ iche | Night Vision (Infrared), Two-Way Audio, Motion Detection, Micro SD Card Recording (up to 64GB) |
| Ụdị njikwa | Amazon Alexa (via app integration) |
| Ụdị nkwụnye | Wall / Surface |
Note on Power Source: The camera is powered by the included 5V AC adapter and does not contain an internal battery for standalone operation.
12. Ozi nchekwa
- Jiri naanị ihe nkwụnye ọkụ enyere.
- Ewepụla igwefoto na mmiri ma ọ bụ mmiri.
- Zere itinye igwefoto n'ebe anwụ na-acha kpọmkwem ma ọ bụ nso ebe okpomọkụ dị.
- Do not attempt to disassemble or repair the camera yourself. Contact support for assistance.
- Debe igwefoto na ihe ndị ọzọ dị na ya ka ụmụaka ghara iru ya aka.
13. Akwụkwọ ikike na nkwado
For warranty information, technical support, or further assistance, please refer to the official Trust website or contact their customer service department. Details can typically be found on the product packaging or on the manufacturer's websaịtị.
Akụrụngwa dị n'ịntanetị: www.trust.com
