Millennium 1144-RBZ Traditional Four Light Semi-Flush Ceiling Mount Instruction Manual

1. Okwu mmalite

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Millennium 1144-RBZ Traditional Four Light Semi-Flush Ceiling Mount. This fixture features a traditional design with four lights, finished in Rubbed Bronze, and is designed for semi-flush ceiling installation. Please read all instructions carefully before beginning installation.

Foto 1.1: N'ihu view of the Millennium 1144-RBZ Semi-Flush Ceiling Mount, showcasing its traditional design and rubbed bronze finish.

2. Ozi nchekwa

Ịdọ aka ná ntị: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.

• Gbaa mbọ hụ na njikọ eletrik niile na-agbaso koodu na iwu obodo yana koodu eletriki mba (NEC).
• This fixture is intended for indoor use only and is rated for dry locations.
• Jiri naanị ụdị bọlbụ akọwapụtara na wattage. Agafela oke wattage gosiri na nkwụnye.
• Na-eyi enyo nchekwa mgbe niile mgbe ị na-etinye ya.
• Jiri nlezianya jikwaa ihe ndị mejupụtara iko ka ọ ghara imebi.

3. Ihe ngwugwu

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact customer support for assistance.

• Four Light Semi-Flush Ceiling Mount Fixture (1)
• Ngwa ngwa mgbago (1)
• Installation Instructions (This Manual)

Note: Light bulbs are typically not included and must be purchased separately. This fixture requires four E12 base incandescent bulbs, up to 60 watts each.

4. Ntọala na nwụnye

Professional installation is recommended. If you are performing the installation yourself, ensure you have the necessary tools (screwdriver, wire strippers, electrical tape, safety glasses) and follow these general steps:

1. Gbanyụọ ike: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed. Verify power is off using a voltagọ bụ onye nyocha.
2. Kwadebe Nkwanye: Attach the mounting bracket to the electrical junction box using the screws provided in the hardware kit. Ensure the bracket is securely fastened.
3. Njikọ waya: Connect the fixture's wires to the corresponding house wires. Typically, connect the black wire from the fixture to the black (hot) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the ground wire from the fixture to the bare copper or green ground wire from the junction box. Secure connections with wire nuts.
4. Ndozi Ugwu: Carefully push the wired connections into the junction box. Align the fixture with the mounting bracket and secure it using the provided screws or nuts.
5. Wụnye Bulbs: Screw the recommended E12 base incandescent bulbs (up to 60W each) into the sockets.
6. Weghachi ike: Turn the power back on at the circuit breaker or fuse box. Test the fixture to ensure it operates correctly.

Image 4.1: The Millennium 1144-RBZ Semi-Flush Ceiling Mount installed on a ceiling, with its four lights illuminated, showcasing its ambient lighting effect.

5. Ntuziaka ọrụ

The Millennium 1144-RBZ Semi-Flush Ceiling Mount is designed for simple operation via a standard wall switch. Once properly installed and powered, the fixture will turn on and off with the activation of the connected wall switch.

• Ensure the wall switch connected to the fixture is in the 'ON' position for the lights to operate.
• If the fixture is connected to a dimmer switch, ensure the dimmer is compatible with incandescent bulbs and is rated for the total wattage of the installed bulbs.

Image 5.1: The Millennium 1144-RBZ Semi-Flush Ceiling Mount installed on a ceiling, unlit, highlighting its decorative elements even when not in use.

6. Nlekọta

Regular maintenance will help preserve the appearance and functionality of your lighting fixture.

• Nhicha: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish.
• Ndokwa bọlbụ: Before replacing bulbs, turn off power at the circuit breaker. Allow bulbs to cool completely. Unscrew old bulbs and replace with new E12 base incandescent bulbs, not exceeding 60 watts per bulb.
• Nyocha: Periodically inspect the fixture for any loose wiring or damaged components. If any issues are found, disconnect power and consult a qualified electrician.

7. Nchọpụta nsogbu

If your fixture is not operating correctly, refer to the following troubleshooting guide:

8. Nkọwapụta

9. Akwụkwọ ikike Ozi

This product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the documentation included with your purchase or visit the official Millennium Lighting websaịtị. Debe ihe akaebe nke ịzụrụ ihe maka nkwado akwụkwọ ikike.

10. Nkwado

For technical assistance, missing parts, or warranty inquiries, please contact Millennium Lighting customer support. You can often find contact information on the manufacturer's websaịtị ma ọ bụ site na onye na-ere ahịa ebe a zụrụ ngwaahịa ahụ.

I nwekwara ike ịga leta ya MILLENNIUM Store on Amazon maka ozi ngwaahịa ọzọ na akụrụngwa nkwado.