Crosley C200 Direct-Drive Turntable Instruction Manual

Okwu mmalite

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Ntuziaka nchekwa dị mkpa

• Gụọ ntuziaka niile tupu ojiji.
• Debe akwụkwọ ntuziaka a maka ntụnye aka n'ọdịnihu.
• Ejila ngwa a n'akụkụ mmiri.
• Jiri akwa kpọrọ nkụ hichaa naanị.
• Akwụsịla oghere ikuku ikuku ọ bụla. Wụnye dị ka ntuziaka onye nrụpụta si dị.
• Awụnyela n'akụkụ ebe okpomọkụ ọ bụla dị ka radiators, ndekọ okpomọkụ, stovu, ma ọ bụ ngwa ndị ọzọ (gụnyere amplifiers) nke na-emepụta okpomọkụ.
• Chebe eriri ọkụ ka ị ghara ịgagharị ma ọ bụ tuo ya, ọkachasị na plọg, ebe nchekwa dị mma, na ebe ha si na ngwa ahụ pụta.
• Jiri naanị mgbakwunye / ngwa ndị nrụpụta akọwapụtara.
• Kwupu ngwa a n'oge oke mmiri ozuzo ma ọ bụ mgbe ejighi ya ogologo oge.
• Tụtụ aka n'aka ndị ọrụ ruru eru. A na-achọ ọrụ mgbe ngwa ahụ mebiri emebi n'ụzọ ọ bụla, dị ka eriri ọkụ ma ọ bụ plọg mebiri emebi, mmiri mmiri wụfuru ma ọ bụ ihe dabara n'ime ngwa ahụ, ekpughere ngwa ahụ na mmiri ozuzo ma ọ bụ mmiri, anaghị arụ ọrụ nke ọma. , ma ọ bụ ahapụla ya.

Ihe ngwugwu

Gbaa mbọ hụ na etinyere ihe niile edepụtara n'okpuru na ngwugwu gị:

• Crosley C200 Direct Drive Turntable
• Akwụkwọ ntuziaka (akwụkwọ a)
• Ihe mkpuchi uzuzu
• Platter nwere eriri mbanye
• Felt Slip Mat
• Ibu ibu
• Head Shell with Audio-Technica Magnetic Cartridge
• 45 RPM nkwụnye
• RCA Output Cables

Ihe karịrịview

Mara ihe ndị dị mkpa dị na tebụl gị.

Melite

1. Platter na Drive Belt Installation

1. Carefully place the platter onto the center spindle.
2. Locate the drive belt, which is pre-installed on the underside of the platter.
3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon.
5. Place the felt slip mat on top of the platter.

2. Tone Arm Assembly and Balancing

1. Install Counterweight: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
3. Remove Stylus Protector: Gently remove the clear plastic stylus protector from the cartridge.
4. Unlock Tone Arm: Release the tone arm from its rest using the tone arm lock.
5. Balance Tone Arm: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
6. Tọọ Ike Nchọgharị: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
7. Set Anti-Skate: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.

3. Connecting to Audio System

1. Connect the RCA output cables from the turntable to your ampigwe okwu ma ọ bụ ike okwu.
2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
   • FỌNỌ: Use if your amplifier has a dedicated phono input.
   • EZI: Use if your amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
3. Connect the power adapter to the turntable and then to a wall outlet.

Ntuziaka ọrụ

1. Ịkpọ ndekọ

1. Place a record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
2. Jiri ihe mgbanwe nhọrọ ọsọ họrọ ọsọ kwesịrị ekwesị (33 1/3 ma ọ bụ 45 RPM).
3. Unlock the tone arm from its rest.
4. Lift the cueing lever to raise the tone arm.
5. Manually position the tone arm over the desired starting groove of the record.
6. Gently lower the cueing lever to allow the stylus to descend onto the record.
7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

1. Gbaa mbọ hụ na agbanyere turntable.
2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
3. Chọọ maka "Crosley C200" in your device's Bluetooth settings and select it to pair.
4. Once paired, audio from your device will play through the turntable's connected speakers/ampna -emegharị ihe.

Mara: The Bluetooth feature is for receiving audio ka the turntable, not for transmitting audio si the turntable to Bluetooth speakers.

Nlekọta

1. Cleaning the Stylus

• Use a soft brush designed for stylus cleaning.
• Brush gently from back to front (in the direction of the stylus's movement across the record).
• Do not brush from side to side, as this can damage the stylus.

2. Cleaning the Turntable

• Wipe the dust cover and turntable cabinet with a soft, dry cloth.
• Zere iji kemịkalụ siri ike ma ọ bụ ihe nchacha.

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Nchọpụta nsogbu

Nkọwapụta

• Ụdị: C200A-BK
• Akara: Crosley
• Ụdị ụgbọala: Direct Drive
• moto: Oke torque
• Ọsọ ọsọ: 33 1/3, 45 RPM
• Ọrụ: Akwụkwọ ntuziaka zuru oke
• Ogwe aka olu: Balanced S-Shaped with hydraulic lift control, anti-skate, height adjustment, and lockable rest
• Katrij: Audio-Technica Magnetic Cartridge
• Tupu-ampntughari: Built-in switchable phono pre-ampna -emegharị ihe
• Nsonaazụ: Detachable RCA output cables
• Platter: Damped die-cast aluminum with felt slip mat
• Njirimara Pụrụ Iche: Ihe nnata Bluetooth arụnyere n'ime ya
• Ihe: Aluminum (platter), Black finish
• Akụkụ ngwaahịa: 11.02 x 17.72 x 5.47 sentimita asatọ
• Ibu ihe: 11.02 pound
• Ngwa dakọtara: Ọkà okwu, Amponye nnabata, AV

Akwụkwọ ikike na nkwado

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley website. For technical support or service inquiries, please contact Crosley customer service.

Onye nrụpụta: Crosley

Ụbọchị mbụ dị: Disemba 22, 2015

Vidiyo ngwaahịa ngwaahịa