Okwu mmalite
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Zoeller Shark Model 807-0001 Residential Grinder Pump. Please read this manual thoroughly before attempting to install or operate the pump. Retain this manual for future reference.
The Zoeller Shark Model 807-0001 is a 1 HP, 115V residential grinder pump designed for handling wastewater and effluent in residential applications. It features a robust grinding mechanism to reduce solids into a fine slurry, allowing for discharge through small diameter piping.
Ozi nchekwa
WARNING: Risk of electric shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
- Always disconnect power to the pump before handling or servicing.
- Hụ na onye ọrụ ọkụ eletrik ruru eru na-eme njikọ ọkụ eletrik niile ma na-agbaso iwu mpaghara.
- Do not operate the pump in an explosive atmosphere.
- Yiri akụrụngwa nchedo onwe nke kwesịrị ekwesị (PPE) n'oge ntinye na mmezi.
- Ngwaahịa a nwere kemịkalụ ndị Steeti California maara na ha na-akpata ọrịa kansa na nkwarụ ọmụmụ ma ọ bụ mmerụ ahụ ndị ọzọ metụtara ọmụmụ nwa. (Ịdọ Aka Na Ntị nke Atụmatụ 65)
Ntọala na nwụnye
Proper installation is crucial for the longevity and performance of your grinder pump. Consult a qualified professional for installation if you are unsure.
Mwepu na nyocha
Carefully remove the pump from its packaging. Inspect for any visible damage that may have occurred during shipping. Report any damage to your supplier immediately.
Figure 1: Zoeller Shark Model 807-0001 Residential Grinder Pump. This image shows the complete pump unit with its float switch mechanism.
Location and Sump Requirements
- The pump must be installed in a properly sized and vented sump or basin.
- Ensure the sump is free of debris before placing the pump.
- The pump should be placed on a solid, level surface at the bottom of the sump.
Njikọ ọkpọkọ
- Connect the discharge piping to the pump's outlet. Ensure all connections are watertight.
- Install a check valve in the discharge line to prevent backflow.
- A shut-off valve is recommended for ease of maintenance.
Njikọ eletrik
- The pump requires a 115V, 60 Hz, single-phase power supply.
- Connect the pump to a dedicated, properly grounded circuit with appropriate overcurrent protection.
- Ensure the float switch is installed and adjusted correctly to control pump cycles.
Ntuziaka ọrụ
Once installed and connected, the Zoeller Shark Model 807-0001 operates automatically via its float switch.
Mmalite mbụ
- Ensure all piping and electrical connections are secure.
- Slowly fill the sump with water to activate the float switch.
- Observe the pump for proper operation: it should turn on, pump down the water, and then turn off.
- Check for any leaks in the discharge piping.
Arụ ọrụ nkịtị
The pump will activate when the water level rises to the "on" level set by the float switch and will continue to run until the water level drops to the "off" level. The grinding mechanism processes solids before pumping.
Ọgụgụ 2: nso nso view of the Zoeller Shark Grinder Pump's impeller and grinding plate. This mechanism is responsible for reducing solids in wastewater.
Nlekọta
Regular maintenance helps ensure reliable operation and extends the life of your pump.
Routine Checks (Monthly)
- Nlele anya: Check the pump and sump for any unusual debris, blockages, or signs of wear.
- Mgbanwe n'elu mmiri: Jiri aka bulie ma wetuo mgba ọkụ n'elu mmiri iji hụ na ọ na-aga n'efu ma mee ka mgbapụta ahụ rụọ ọrụ nke ọma.
- Discharge Line: Listen for any unusual noises or signs of obstruction in the discharge line.
Annual Inspection (Professional Recommended)
- Inspect the grinding mechanism for wear.
- Check motor windings and electrical connections.
- Clean the sump basin nke ọma.
CAUTION: Always disconnect power before performing any maintenance or inspection.
Nchọpụta nsogbu
Nkebi a na-enye azịza maka nsogbu ndị a na-enwekarị. Maka nsogbu ndị a na-edeghị aha, kpọtụrụ ndị ahịa.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Mgbapụta anaghị agba ọsọ | No power; tripped breaker; faulty float switch; motor overload. | Check power supply and breaker. Inspect float switch for obstruction. Reset thermal overload if present. |
| Mgbapụta ọkụ na-aga n'ihu | Stuck float switch; check valve failure; discharge line blockage. | Clear float switch. Inspect/replace check valve. Clear discharge line. |
| Pampụ na-agba mana mmiri anaghị apụta | Air lock; clogged impeller/grinder; discharge line blockage. | Vent air from pump. Clear impeller/grinder. Clear discharge line. |
| Oke mkpọtụ ma ọ bụ ịma jijiji | Debris in pump; worn bearings; improper installation. | Disconnect power and inspect for debris. Contact service professional for worn parts. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | 807-0001 |
| Ụdị | Zoeller |
| Ike inyinya | 1 HP |
| Voltage | 115 volts |
| Isi Iyi Ike | AC/DC |
| Ọnụego nfe kacha | galọn 45 kwa nkeji |
| Ibu Ibu | 65 pound |
| Akụkụ ngwaahịa | 17.25"L x 8.91"W x 17.25"H |
| Ihe onwunwe | Igwe anaghị agba nchara |
Ozi akwụkwọ ikike
Zoeller Company products are warranted against defects in material and workmanship for a period specified by the manufacturer from the date of purchase. Specific warranty terms and conditions may vary. Please refer to the official Zoeller Company warranty statement provided with your product or visit the manufacturer's websaịtị maka ozi zuru ezu.
Note: Improper installation, unauthorized repairs, or misuse of the product may void the warranty.
Nkwado ndị ahịa
For technical assistance, replacement parts, or warranty claims, please contact Zoeller Customer Support.
- Onye nrụpụta: Zoeller Company
- Websaịtị: www.zoellerpumps.com
- Ozi mkpọtụrụ: Refer to the official Zoeller webNkwakọ ngwaahịa saịtị ma ọ bụ ngwaahịa maka nkọwa kọntaktị ugbu a.
