IKEA BlaviK LED Wall Lamp ya na ntuziaka onye ọrụ Mirror

1. Okwu mmalite

This manual provides essential information for the safe and efficient use of your IKEA BlaviK LED wall lamp with mirror. Please read these instructions carefully before installation and use, and retain them for future reference.

The IKEA BlaviK is a battery-operated LED wall lamp featuring an integrated magnifying mirror, designed for use in humid environments such as bathrooms. It offers adjustable lighting and an automatic shut-off function for energy saving.

2. Ozi nchekwa

• Nchekwa batrị: Always use the correct type and size of batteries (3 x HR6/AA). Ensure batteries are inserted with correct polarity (+ and -). Do not mix old and new batteries, or different types of batteries. Remove exhausted batteries promptly. Dispose of batteries according to local regulations.
• gburugburu: This product is tested and approved for use in humid environments (IP44 rated), such as bathrooms. However, avoid direct water spray onto the lamp.
• Isi mmalite ọkụ LED: The LED light sources in this product are non-replaceable. Do not attempt to open or modify the lamp.
• Ịkwanye: Ensure the wall surface is suitable for mounting and can support the weight of the lamp. Use appropriate screws and wall plugs for your wall type (screws are not included).

3. Ihe ngwugwu

Nyochaa na akụrụngwa niile dị tupu ịmalite nwụnye:

• IKEA BlaviK LED Wall Lamp unit with integrated mirror
• Akwụkwọ ntuziaka (akwụkwọ a)

Mara: Wall mounting screws and batteries (3 x HR6/AA) are not included and must be purchased separately. IKEA recommends LADDA rechargeable batteries.

4. Ntọala na nwụnye

4.1. Ntinye batrị

1. Locate the battery compartment on the lamp otu.
2. Mepee mkpuchi nke batrị batrị.
3. Insert 3 x HR6/AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Mechie mkpuchi nke batrị batrị nke ọma.

4.2. Mgbidi Mgbidi

1. Choose a suitable location on the wall, ensuring it is clean and dry.
2. Kanye akara n'ebe achọrọ maka itinye ihe n'elu mgbidi ahụ.
3. Drill holes if necessary and insert appropriate wall plugs (not included).
4. Chekwaa lamp to the wall using suitable screws (not included). Ensure the lamp is firmly attached and stable.

This image displays the IKEA BlaviK LED wall lamp, highlighting its compact design, white casing, and the flexible arm that allows for light direction adjustment. The integrated mirror is visible on the lamp's face.

5. Ntuziaka ọrụ

• Gbanyụọ/ Gbanyụọ: Ndị lamp can be switched on and off manually using the integrated switch.
• Nwepu akpaaka: For energy saving, the lamp features a 15-minute automatic shut-off function.
• Ndozi ọkụ: The flexible arm allows you to adjust the direction of the light as needed, providing targeted illumination.
• Igwe Ngosipụta: Utilize the integrated magnifying mirror for tasks such as shaving or applying makeup.

6. Nlekọta

To ensure the longevity and optimal performance of your IKEA BlaviK lamp, follow these cleaning instructions:

• Hichapụ lamp elu na mgbasa oziamp akwa .
• For more thorough cleaning, use a mild detergent on the damp akwa .
• After cleaning, dry the lamp jiri akwa dị ọcha kpọrọ nkụ nke ọma.
• Do not use abrasive cleaners or solvents, as these can damage the product's finish.

7. Nchọpụta nsogbu

• Lamp anaghị agba ọkụ:
  • Lelee ma batrị ndị ahụ hà dị n'ime ya nke ọma site na iji polarity ziri ezi.
  • Ensure the batteries are not exhausted; replace or recharge them if necessary.
  • Verify the manual switch is in the 'ON' position.
• Ìhè adịghị mma:
  • The batteries may be low. Replace or recharge them.
• Nkwụsị akpaghị aka anaghị arụ ọrụ:
  • Gbaa mbọ hụ na lamp is not being manually overridden.
  • Check battery levels, as low batteries might affect timer functions.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For information regarding warranty, returns, or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.