Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, and maintenance of your StarTech.com 10/100Mbps Ethernet to USB 2.0 Network Print Server (PM1115U2). This device enables you to share a USB printer with multiple users across your local area network (LAN), eliminating the need for individual printers at each workstation.
The print server supports web-based management for easy setup and monitoring, allowing flexible placement of your printer. It is compatible with most standard USB printers and works with both Mac and Windows operating systems, including Windows 10. It also supports Line Printer Remote (LPR) protocol and Bonjour Print Services for broad network printing capabilities.
Ihe ngwugwu
Tupu ịmalite nrụnye ahụ, biko hụ na ihe niile edepụtara n'okpuru dị na ngwugwu gị:
- 1x StarTech.com 10/100Mbps Ethernet to USB 2.0 Network Print Server (PM1115U2)
- 1x Universal Power Adapter (NA/UK/EU/AU)
- 1x RJ45 Network Cable
- Ntuziaka mbido 1x ngwa ngwa
Ntọala na nwụnye
Follow these steps to set up your network print server:
- Connect the Print Server to Power: Connect the universal power adapter to the DC 5V port on the print server and plug it into a power outlet. The Power LED indicator on the print server should illuminate.
- Jikọọ na netwọk: Connect one end of the included RJ45 network cable to the Ethernet port on the print server and the other end to an available Ethernet port on your network router or switch. The Link and Act LEDs on the print server's Ethernet port should indicate network activity.
- Connect to Printer: Connect your USB printer to the USB Type-A port on the print server using a standard USB printer cable (not included).
- Nhazi izizi: The print server can be configured via a web browser. Refer to the included Quick Start Guide for detailed instructions on accessing the web-based management interface and configuring network settings, including IP address assignment (DHCP supported).
Ọrụ
Once the print server is set up and configured on your network, users can print to the connected USB printer from any computer on the same LAN. The print server supports various network protocols for broad compatibility.
Supported Operating Systems and Protocols:
- Sistemu eji arụ ọrụ: Compatible with Mac and Windows operating systems, including Windows 10.
- Protocol netwọkụ: Supports Line Printer Remote (LPR) protocol and Bonjour Print Services.
- Ndakọrịta netwọk: Works with any network that can communicate on 10Base-T or 100Base-T Ethernet.
Note: Printing from Android, iPad, and iPhone devices is not supported by this print server.
Nlekọta
The StarTech.com PM1115U2 Network Print Server is designed for reliable operation with minimal maintenance. To ensure optimal performance and longevity:
- Debe Ọcha: Periodically wipe the exterior of the device with a soft, dry cloth to remove dust. Do not use liquid cleaners or aerosols.
- Igwe ikuku: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not block the ventilation slots.
- Mmelite femụwe: Check the StarTech.com website periodically for any available firmware updates for your model. Firmware updates can improve performance, add features, or resolve issues.
- Njikọ eriri: Ensure all cables (power, Ethernet, USB) are securely connected to prevent intermittent connectivity issues.
Nchọpụta nsogbu
If you encounter issues with your StarTech.com Network Print Server, consider the following troubleshooting steps:
- Enweghị ike:
- Verify the power adapter is securely connected to the print server and a working power outlet.
- Check if the Power LED on the print server is illuminated.
- Enweghị njikọ netwọkụ:
- Ensure the RJ45 network cable is securely connected to both the print server and your network router/switch.
- Check the Link and Act LEDs on the print server's Ethernet port. If they are off, there might be a cable issue or a problem with the network port on your router/switch.
- Verify the print server has a valid IP address on your network. This can be checked via the web-dabere na njikwa interface.
- Ihe nbipute anaghị aza:
- Ensure the USB printer cable is securely connected between the print server and the printer.
- Verify the printer is powered on and in a ready state.
- Confirm that the correct printer drivers are installed on the client computers attempting to print.
- Restart the print server and the printer.
- Enweghị ike ịnweta Web Ihuenyo:
- Ensure your computer is on the same network segment as the print server.
- Verify the IP address of the print server. If it's set to DHCP, check your router's DHCP client list. If it's static, ensure you are using the correct IP address.
- Gbanyụọ ngwa ngwa firewall ọ bụla na kọmputa gị nwa oge nke nwere ike igbochi ohere.
For further assistance, refer to the online FAQs and IT Pro Community available on the StarTech.com website. You can also consult the official Akwụkwọ ntuziaka onye ọrụ (PDF) or Akwụkwọ ntuziaka nwụnye (PDF) provided by StarTech.com.
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | PM1115U2 |
| Ụdị | StarTech.com |
| Akụkụ ngwaahịa | 2.1 x 2.1 x 0.9 sentimita (5.33 x 5.33 x 2.29 cm) |
| Ibu Ibu | 2.18 ounces (0.06 n'arọ) |
| Ngwaọrụ Akụrụngwa | Ethernet, USB, USB 2.0 |
| Protocol Njikọ Data | IEEE 802.3 |
| Ọnụego mbufe data | 100 Megabits kwa nkeji |
| Agba | Nwa |
| Ngwa dakọtara | Ihe nbipute |
| UPC | 065030855174 |
Akwụkwọ ikike na nkwado
For information regarding product warranty, technical support, and additional resources, please visit the official StarTech.com websaịtị ma ọ bụ rụtụ aka na akwụkwọ agụnyere na ngwaahịa gị.
StarTech.com offers a range of support options, including online FAQs, a knowledge base, and direct technical assistance to help you with any queries or issues you may encounter.
Akwụkwọ ntuziaka onye ọrụ (PDF): Download Ebe a
Akwụkwọ ntuziaka nwụnye (PDF): Download Ebe a
