1. Ngwaahịa gafereview
This manual provides instructions for the installation, operation, and maintenance of the WELLS Electric Thermostat Dial, Model 130-1003 (Part Reference 67172). This dial is designed for controlling electric heating elements within a temperature range of 100°F to 200°F. It features a universal 4-way mounting position and is compatible with standard .187" diameter D-stems.
Foto 1: WELLS Electric Thermostat Dial, Model 130-1003. This image shows the black plastic dial with a chrome-plated face, designed for temperature control.
2. Ozi nchekwa
Read all instructions carefully before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.
- Ihe ize ndụ eletrik: Ensure power is disconnected before installation or maintenance. Only qualified personnel should perform electrical work.
- Temperature Hazard: The thermostat controls heating elements. Surfaces may become hot. Exercise caution to prevent burns.
- Ojiji nke ọma: Use this thermostat only for its intended purpose as an electric temperature control dial. Do not modify the device.
- Ọnọdụ gburugburu: Do not expose the device to excessive moisture or extreme temperatures outside its operating range.
3. Ntọala na nwụnye
This section outlines the general steps for installing the thermostat dial. Consult your equipment's specific wiring diagram and installation instructions for detailed guidance.
3.1 Nyochaa nwụnye tupu etinye ya
- Verify that the power supply to the equipment is completely disconnected.
- Confirm that the existing thermostat's D-stem diameter matches the .187" requirement of this dial.
- Ensure the mounting area is clean and free from debris.
3.2 Mounting the Dial
- Carefully align the D-shaped opening on the back of the thermostat dial with the D-stem of the control unit.
- Gently push the dial onto the stem until it is fully seated. The universal 4-way mounting allows for flexible orientation.
- Ensure the dial rotates smoothly without obstruction and that the temperature markings align correctly with the indicator on the control panel.
4. Ntuziaka ọrụ
The WELLS Electric Thermostat Dial provides simple and intuitive temperature control.
4.1 Ịtọ ntọala okpomọkụ
- After installation and power restoration, turn the dial clockwise or counter-clockwise to select the desired temperature.
- The temperature range for this dial is from 100°F to 200°F.
- The heating element will activate or deactivate to maintain the set temperature.
4.2 Understanding the Dial Markings
The chrome-plated face of the dial features clear markings indicating temperature settings. Align the indicator on your equipment's control panel with the desired temperature on the dial.
5. Nlekọta
Regular maintenance ensures optimal performance and longevity of your thermostat dial.
5.1 Nhicha
- Before cleaning, ensure the equipment is turned off and cooled down.
- Wipe the dial's surface with a soft, damp akwa .
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic and chrome finish.
5.2 Nyocha
- Periodically inspect the dial for any signs of wear, cracks, or damage.
- Ensure the dial remains securely attached to the D-stem.
- If any damage is observed, replace the dial immediately to prevent operational issues.
6. Nchọpụta nsogbu
This section addresses common issues you might encounter with the thermostat dial.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Dial does not turn or is stiff. | Incorrect alignment with D-stem; debris; damaged stem. | Remove dial and re-align. Clean any debris. Inspect D-stem for damage. |
| Temperature setting does not respond. | Dial not fully seated on D-stem; internal control unit issue. | Ensure dial is fully seated. If issue persists, consult equipment's service manual or a qualified technician. |
| Dial appears loose. | Improper installation; worn D-stem or dial opening. | Re-seat the dial firmly. If it remains loose, consider replacing the dial or inspecting the D-stem for wear. |
For issues not listed here, or if troubleshooting steps do not resolve the problem, contact a qualified service technician or the manufacturer.
7. Nkọwapụta ngwaahịa
| Ụdị | Ọdịda |
| Nọmba nlereanya | 130-1003 |
| Ntụaka akụkụ | 67172 |
| Ihe onwunwe | Plastic |
| Ụdị njikwa | Njikwa ọkpụkpọ |
| Oke okpomọkụ | 100°F ruo 200°F |
| D-Stem Compatibility | Standard .187" diameter |
| Ịkwanye | Universal 4-way positions |
| Agba | Black with Chrome-Plated Face |
| Akụkụ ngwaahịa | 2 x 2 x 2 sentimita asatọ |
| Ibu Ibu | 0.48 ounces (ihe dị ka 13.61 g) |
| UPC | 251301003911 |
8. Akwụkwọ ikike Ozi
Specific warranty details for the WELLS Electric Thermostat Dial, Model 130-1003, are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact the original seller or the manufacturer directly.
9. Nkwado ndị ahịa
If you require technical assistance, have questions about the product, or need to report an issue, please contact the retailer from whom you purchased the WELLS Electric Thermostat Dial or visit the official Wells Manufacturing websaịtị maka akụrụngwa nkwado.
