Okwu mmalite
This manual provides detailed instructions for the installation, operation, and maintenance of your WAC Lighting H-LED201-30-WT Contemporary Summit ACLED 15W Beamshift Line Voltage Cone H-Track Head. This track head is designed for use with 120V track systems and features Beamshift technology for adjustable beam angles.
Ozi nchekwa
ỊDỌ AKA NA NTỊ: Ngwaahịa a nwere kemịkalụ ndị Steeti California maara na ha na-akpata ọrịa kansa na nkwarụ ọmụmụ ma ọ bụ ihe ndị ọzọ metụtara ọmụmụ nwa. Maka ozi ndị ọzọ, gaa na www.P65Warnings.ca.gov.
- Gụọ ntụziaka niile nke ọma tupu echichi.
- Ensure power is turned off at the circuit breaker before installation or servicing.
- Ekwesịrị ịrụ nrụnye site n'aka onye ọrụ ọkụ eletrik ma ọ bụrụ na ị maghị ya.
- This fixture is UL & CUL listed for dry locations. Do not use in wet or damp gburugburu.
- Anwala ịmegharị ihe nrụnye. Mgbanwe ọ bụla nwere ike mebie akwụkwọ ikike ma mepụta ihe egwu nchekwa.
Ihe ngwugwu
- 1 x WAC Lighting H-LED201-30-WT Summit ACLED Track Head
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | H-LED201-30-WT |
| Ụdị | WAC ọkụ |
| Ihe onwunwe | Die-cast Aluminum, Glass Shade |
| Agba | Ọcha |
| Isi Iyi Ìhè | Integrated AC LED Module (no lamp achọrọ) |
| Wattage | 15W (comparable to 50W MR16) |
| Voltage | 120V |
| Okpomọkụ agba | 3000K (Ọcha na-ekpo ọkụ) |
| Ndekọ ngosi agba (CRI) | 90+ |
| Oge awa akara | awa 50,000 |
| Na-ebelata | Smooth and continuous dimming to 10% with an electronic low voltage dimmer |
| Angle Beam | In-field changeable between 20 and 40 degrees (Beamshift Technology) |
| Ndakọrịta soro | H-Track (also available for J/J2 and L track configurations) |
| Akụkụ (L x W x H) | 3.25 x 3.88 x 6.75 sentimita asatọ |
| Ibu Ibu | 1 pound |
| Asambodo | UL & CUL Listed for dry locations, Energy Star Rated |
Ntọala na nwụnye
This track head is designed for easy installation onto a 120V H-Track system. Ensure the track system is properly installed and powered off before proceeding.
Nzọụkwụ nwụnye:
- Gbanyụọ Ike: Locate the circuit breaker controlling the track lighting system and turn off the power. Verify that the power is off before beginning installation.
- Identify Track Type: Ensure your track system is an H-Track. This fixture is specifically designed for H-Track configurations.
- Insert Track Head: Align the track head's adapter with the track slot. Push the adapter firmly into the track and rotate it 90 degrees to lock it into place. Ensure the electrical contacts are properly engaged with the track conductors.
- Ọnọdụ echedoro: Once inserted, slide the track head to the desired position along the track. Some track heads may have a locking mechanism (e.g., a screw) to secure their position; tighten if applicable.
- Gbanwee ntụzịaka: The track head can be swiveled and tilted to direct light as needed.
- Weghachi ike: Once the track head is securely installed and positioned, restore power at the circuit breaker.
Image: WAC Lighting H-LED201-30-WT Summit ACLED Track Head, showcasing its cone shape and white finish.
Image: Technical drawing illustrating the dimensions of the WAC Lighting H-LED201-30-WT track head, including its overall height of 6 3/4 inches, and cone dimensions.
Ntuziaka ọrụ
Beamshift Technology:
The Summit track head features Beamshift Technology, allowing you to modify the beam angle in the field without additional tools or accessories. This is achieved by changing the location of the lens within the fixture. The beam angle can be adjusted between 20 and 40 degrees to suit your lighting needs.
- To adjust the beam angle, gently rotate or slide the lens assembly within the fixture until the desired beam spread is achieved. Refer to the product's internal markings or visual cues for specific adjustment points.
Igha:
This fixture is designed for smooth and continuous dimming down to 10% when used with a compatible eletrọnịkị obere voltage (ELV) dimmer. Ensure your dimmer switch is an ELV type for optimal performance.
- Operate the dimmer switch as you would any standard light switch to control the light output.
Nlekọta
The WAC Lighting Summit ACLED Track Head requires minimal maintenance.
- Nhicha: Hụ na agbanyụrụ ọkụ tupu ị sachaa ya. Jiri ihe dị nro, kpọrọ nkụ, ma ọ bụ nke dị ntakịrị ọkụamp cloth to wipe the exterior of the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Ogologo ndụ ọkụ: The integrated LED module has a rated life of 50,000 hours and does not require lamp nnọchi.
Nchọpụta nsogbu
If your track head is not functioning correctly, consider the following:
- Enweghị ọkụ:
- Lelee ma ọ bụrụ na ike dị na ihe mgbawa sekit ahụ.
- Ensure the track head is properly seated and making good electrical contact with the track.
- Verify that the track system itself is receiving power.
- Flickering or Inconsistent Dimming:
- Confirm that an electronic low voltage (ELV) dimmer is being used. Incompatible dimmers can cause performance issues.
- Hụ na a na-egosi ọkwa dimmer maka wat niiletage of all fixtures on the circuit.
- If issues persist after checking these points, contact customer support.
Ozi akwụkwọ ikike
WAC Lighting provides a 5-afọ akwụkwọ ikike on this product. Additionally, a 2-afọ akwụkwọ ikike is provided specifically for the finish of the fixture. Please retain your proof of purchase for warranty claims.
Nkwado
For further assistance, technical support, or warranty inquiries, please contact WAC Lighting customer service. Refer to the official WAC Lighting websaịtị maka ozi kọntaktị ugbu a.
WAC ọkụ Websaịtị: www.waclighting.com
