Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier User Manual

1. Okwu mmalite

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P4558-20 is a two-light linear island chandelier featuring light umber etched glass shades and an antique bronze finish, designed for indoor use.

2. Ozi nchekwa

Ịdọ aka ná ntị: Ihe ize ndụ nke ujo eletrik. Kwupu ike na igbe fuse ma ọ bụ sekit nke na-agbaji tupu echichi ma ọ bụ ọrụ.

• Njikọ eletriki niile ga-abụrịrị dịka iwu mpaghara, iwu obodo, ma ọ bụ Koodu Eletriki Mba (NEC) siri dị.
• Kpọtụrụ onye ọrụ ọkụ eletrik ma ọ bụrụ na ị maghị usoro nrụnye.
• Use only UL/cUL listed wire connectors.
• Agafela oke wattage specified for the fixture (100 watts per bulb).
• Jiri nlezianya jikwaa ihe ndị mejupụtara iko ka ọ ghara imebi.
• Ensure the fixture is securely mounted to a structural element of the ceiling.

3. Ihe ngwugwu

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.

• Chandelier fixture assembly
• Mounting hardware (crossbar, screws, wire nuts)
• Glass shades (2)
• Mpempe ntinye

4. Ntọala na nwụnye

Follow these steps carefully to install your chandelier. It is recommended to have a second person assist during installation due to the size and weight of the fixture.

Nzọụkwụ 1: Kwadebe maka nwụnye

1. Gbanyụọ ike na isi ihe na-agbaji sekit ma ọ bụ igbe fuse.
2. Wepu ihe niile ma dobe ha n'elu ala dị ọcha ma dịkwa larịị.
3. Review the included installation sheet for any specific model details.

Nzọụkwụ 2: Wụnye Fixture

1. Attach the mounting crossbar to the outlet box using the provided screws. Ensure it is securely fastened.
2. Determine the desired hanging height and adjust the suspension rods accordingly. The fixture uses rigid rods for suspension.
3. Carefully lift the fixture towards the ceiling, feeding the electrical wires through the center hole of the mounting crossbar.

Nzọụkwụ 3: Njikọ eletrik

1. Connect the bare copper ground wire from the fixture to the ground wire from the outlet box using a wire nut.
2. Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire nut.
3. Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire nut.
4. Ensure all wire connections are secure and tucked neatly into the outlet box.

Step 4: Secure the Fixture and Install Shades

1. Attach the fixture canopy to the mounting crossbar, securing it with the decorative nuts or screws provided.
2. Carefully place the light umber etched glass shades onto the fixture's lamp holders, securing them according to the specific design (typically with threaded rings).

Step 5: Install Light Bulbs

1. Insert two (2) medium-base light bulbs (not included) into the sockets. Do not exceed 100 watts per bulb.

Foto 4.1: Fully assembled Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier. This image shows the antique bronze frame, the two light umber etched glass shades, and the suspension rods extending upwards, ready for ceiling mounting.

Nzọụkwụ 6: Weghachi ike

1. Restore power at the main circuit breaker or fuse box.
2. Test the fixture to ensure proper operation.

5. Ntuziaka ọrụ

The Progress Lighting P4558-20 chandelier operates via a standard wall switch (not included) connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

Mara: This fixture is designed for use with a standard AC power source (120 Volts) and does not include an integrated control method like an app or push button as a primary control for the fixture itself, but rather refers to potential external control systems it might be compatible with.

6. Nlekọta

Nhicha

• Kwupu ike mgbe niile tupu ihicha.
• Iji hichaa ihe ndozi ahụ, jiri akwa dị nro hichaa ya.
• Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass.
• For glass shades, a mild glass cleaner can be used on a cloth, then wipe dry.

Mgbanwe Bulb

• Ensure power is off and bulbs have cooled before attempting to replace them.
• Wepụ bọlbụ ochie ahụ n'ime oghere ahụ.
• Screw in a new medium-base bulb, ensuring it does not exceed 100 watts.

7. Nchọpụta nsogbu

8. Nkọwapụta

• Ụdị: P4558-20
• Akara: Ọganihu ọkụ
• Ihe: Glass, igwe
• Mechaa: Bronze ochie
• Ihe ndo: Etched Glass (Light Umber)
• Ọnụọgụ isi mmalite ọkụ: 2
• Wattage: 100 watts (max per bulb)
• Voltage: 120 volts
• Ibu ihe: 11.66 pound
• Mgbakọ achọrọ: Ee
• Ụdị nkwụnye: Ugwu elu ụlọ
• Akụkụ (ihe dị ka): Length: 36.00 in., Width: 13.12 in., Height: 23.62 in.

9. Akwụkwọ ikike na nkwado

This product is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or contact Progress Lighting directly.

Onye nrụpụta: HI- Progress Lighting

For further assistance, visit the official Progress Lighting websaịtị ma ọ bụ kpọtụrụ ngalaba ọrụ ndị ahịa ha.