Okwu mmalite
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount in Brushed Nickel finish.
Ozi nchekwa
Ịdọ aka ná ntị: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.
- Gụọ ntụziaka niile nke ọma tupu echichi.
- Ensure the electrical supply is disconnected before handling the fixture.
- Njikọ waya niile ga-abụrịrị nke kwekọrọ na koodu eletriki mpaghara na nke mba.
- Agafela voltage (120 volts).
- Emebere ihe ndozi a maka naanị ime ụlọ.
Ihe ngwugwu
Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:
- LED Flush Mount Fixture (with integrated AC Module)
- Onyinyo iko
- Mounting Hardware Kit (screws, wire nuts, mounting strap)
- Akwụkwọ ntuziaka
Ngwa achọrọ (anaghị etinye ya)
- Phillips Isi Ihe Nleghari
- Flathead sikruuokwomoto
- Waya Strippers
- Pliers
- Igwe ọkụ eletrik
- Igwe nchekwa
Ntọala na nwụnye
Follow these steps to properly install your LED flush mount fixture:
- Gbanyụọ ike: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed. Verify power is off using a voltagọ bụ onye nyocha.
- Kwadebe Nkwanye: Attach the mounting strap to the junction box using the provided screws. Ensure the strap is securely fastened.
- Njikọ waya:
- Jikọọ nwa waya site na nkwụnye ahụ ruo na nwa waya (ọkụ) sitere na igbe njikọ site na iji waya aki.
- Jikọọ ọcha waya site na nkwụnye ahụ ruo na ọcha waya (nke na-anọpụ iche) site na igbe njikọ site na iji waya aki.
- Jikọọ ala waya site na nkwụnye ahụ ruo na ala wire from the junction box (or to the green ground screw on the mounting strap) using a wire nut.
- Jiri nlezianya tụba wires niile n'ime igbe njikọ.
- Tinye ihe ndozi: Align the fixture base with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the ceiling.
- Wụnye ndò Glass: Carefully attach the glass shade to the fixture according to the specific design. Typically, this involves twisting or securing with decorative nuts.
- Weghachi ike: Gbanyụọ ọkụ azụ na igbe sekit ma ọ bụ fuse.
Image: Product dimensions for installation planning. The fixture measures approximately 9.25 inches in diameter and 4.63 inches in height.
Foto: Examples of flush mount light fixture placement in various rooms, including hallways, living areas, bedrooms, and utility spaces.
Ntuziaka ọrụ
Once installed, operate your LED flush mount fixture as follows:
- Gbanyụọ/ Gbanyụọ: Use a standard wall switch connected to the fixture's electrical circuit to turn the light on or off.
- Igha: This fixture is dimmable when used with a compatible wall dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage.
Image: Visual representation indicating the fixture is dimmable when connected to a compatible wall dimmer.
Nlekọta
The Progress Lighting P3408-0930K9 features an integrated LED AC module, meaning there are no bulbs to replace. Maintenance is minimal:
- Nhicha: To clean the fixture, ensure power is off. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents.
- Nyocha: Lelee ihe nkwụnye ọkụ ahụ mgbe niile iji hụ ma ọ bụrụ na ihe ndị na-egosi mmebi ma ọ bụ njikọ ndị na-adịghị mma. Ọ bụrụ na achọpụta nsogbu ọ bụla, gbanyụọ ọkụ eletrik ma gakwuru ọkachamara ọkụ eletrik ruru eru.
Nchọpụta nsogbu
If you encounter issues with your fixture, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Ìhè anaghị agbanwuo. | Enweghị ikike na ngwa. Njikọ wiwi adịghị agwụ agwụ. | Lelee ihe nbibi/fuse sekit. Ensure wall switch is on. Kwupu ike wee lelee njikọ waya. |
| Ọkụ na-enwu ma ọ bụ na-ebelata nke ọma. | Mgbanwe dimmer na-ekwekọghị ekwekọ. Waịkọ rụrụ arụ. | Ensure dimmer is LED-compatible. Kwupu ike wee lelee njikọ waya. |
| Mkpọchi ahụ na-ada ụda. | Mgbanwe dimmer na-ekwekọghị ekwekọ. | Jiri ihe mgba ọkụ dimmer nke LED dakọtara dochie ya. |
Nkọwapụta
Detailed specifications for the Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount:
- Nọmba nlereanya: P3408-0930K9
- Akara: Ọganihu ọkụ
- Agba: Nickel achara acha
- Ihe: Alloy Steel, Glass
- Ụdị: Nke dị ugbu a
- Ụdị Nkụnye ọkụ: Dị nso n'uko ụlọ
- Akụkụ ngwaahịa: 9.25"L x 9.25"W x 4.63"H
- Ojiji ime ụlọ/n'èzí: Ime ụlọ
- Isi mmalite ike: Igwe ọkụ eletrik
- Ụdị nwụnye: Oke ugwu
- Ụdị isi iyi ọkụ: Integrated LED (AC Module)
- Ọnụọgụ isi mmalite ọkụ: 1
- Voltage: 120 volts
- Agba ọkụ: Ọcha na-ekpo ọkụ (3000K)
- Icha ọkụ: 1211 Lumen
- Wattage: 17 Watt
- Ndekọ ngosi agba (CRI): 90
- Enwere ike ibelata: Yes, with compatible wall dimmer
- Mgbakọ achọrọ: Ee
- Mba onye si: China
- UPC: 785247189168
Image: Key LED specifications including 90 CRI for accurate color rendering and 3000K for a warm white light output.
Ozi akwụkwọ ikike
This Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount is covered by a 5-afọ akwụkwọ ikike from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Progress Lighting customer support.
Nkwado ndị ahịa
If you have any questions regarding the installation, operation, or maintenance of your Progress Lighting fixture, please contact Progress Lighting customer support. You can find contact information on the official Progress Lighting websaịtị ma ọ bụ site na onye na-ere ahịa gị.
Akụrụngwa dị n'ịntanetị: Maka ozi ndị ọzọ na nkwado, gaa na Progress Lighting Store on Amazon.
