Okwu mmalite
Thank you for choosing the ANSMANN Powerline 5 Pro Charger. This advanced microprocessor-controlled charger is designed for NiMH/NiCd rechargeable batteries, offering multiple charging programs and comprehensive safety features. Please read this manual carefully before using the device to ensure safe and optimal performance.
Ntuziaka nchekwa
- Use the charger only for NiMH/NiCd rechargeable batteries. Do not attempt to charge primary (non-rechargeable) batteries.
- Ewepụla chaja na mmiri ozuzo ma ọ bụ mmiri.
- Ekwusala ma ọ bụ gbanwee chaja ahụ. Nye ndị ọrụ ruru eru ọrụ niile.
- Gbaa mbọ hụ na ikuku ikuku dị mma mgbe ị na-ebufe.
- Debe ebe ụmụaka na-apụghị iru.
- Zere ikesa kọntaktị batrị obere oge.
- Kpupu chaja n'ofe ọkụ mgbe ejighi ya.
Ngwaahịa gafereview
The ANSMANN Powerline 5 Pro is a versatile battery charger featuring an LCD display and individual charging slots. It supports various battery sizes and offers multiple operational modes.
Foto 1: N'ihu view of the ANSMANN Powerline 5 Pro Charger, showing the LCD display, control buttons (Current, Display, Mode), and four charging slots for cylindrical batteries, plus a dedicated slot for a 9V E-block battery.
Akụkụ ndị bụ isi:
- Ngwa dịgasị iche iche: Charges 1-4 NiMH/NiCd batteries of sizes Micro AAA, Mignon AA, Baby C, Mono D, and one 9V E-block battery.
- Teknụzụ Nchaji ọgụgụ isi: Four charging programs (Charge, Discharge, Refresh, Test) individually adjustable per charging station.
- Nchekwa dị elu: Features reverse polarity protection, short circuit protection, overcharge protection, and automatic shut-off.
- Easy-to-read Display: Large illuminated LCD shows capacity, voltage, charging/discharging current, and charging time for each slot.
- Ojiji dị mma: Includes wide-range power supply for worldwide use and a 12V car adapter.
Ihe ngwugwu
Mgbe imepechara ngwugwu ahụ, biko chọpụta na akụrụngwa niile dị na enweghị mmebi:
- ANSMANN Powerline 5 Pro Charger Unit
- AC Power Adapter (Wide-range)
- Ihe nkwụnye ụgbọ ala 12V
- Akwụkwọ ntuziaka (akwụkwọ a)
Figure 2: The Powerline 5 Pro charger shown with its included accessories: the AC power adapter and the 12V car adapter.
Melite
Na-ejikọta ọkụ ọkụ:
- Locate the DC 12V 1.5A input port on the rear of the charger.
- Connect the provided AC power adapter or 12V car adapter to this input port.
- Plug the other end of the AC power adapter into a suitable wall outlet, or the car adapter into your vehicle's 12V socket.
- The charger's LCD display will illuminate, indicating it is powered on and ready for use.
Ọgụgụ 3: N'azụ view of the Powerline 5 Pro charger highlighting the 12V 1.5A DC input port for connecting the power adapter.
Ntuziaka ọrụ
Ịtinye batrị:
The charger supports various battery sizes. Ensure correct polarity when inserting batteries into the charging slots. The 9V E-block battery has a dedicated slot.
Figure 4: Illustration showing the various battery types suitable for the Powerline 5 Pro charger, including Micro AAA, Mignon AA, Baby C, Mono D, and 9V E-Block.
Understanding the Display and Controls:
The LCD display provides real-time information for each charging slot. The three buttons (Current, Display, Mode) allow you to control the charging process.
- Current Button: Adjusts the charging/discharging current.
- Bọtịnụ ngosi: Toggles through different display parameters (e.g., voltage, capacity, time).
- Bọtịnụ ụkpụrụ: Selects the desired operating program (Charge, Discharge, Refresh, Test).
Figure 5: The Powerline 5 Pro charger with batteries inserted, demonstrating the individual monitoring and automatic shutdown features. The LCD shows charging status.
Charging Programs:
Each charging slot can operate independently with its own program.
- ebubo: Standard charging mode. Insert battery, select desired current with "Current" button, then press "Mode" to start. The charger automatically detects full charge and switches to trickle charge.
- Mwepu: Discharges the battery before recharging it. Useful for reducing memory effect in NiCd batteries. Select "Discharge" mode with "Mode" button, then set discharge current with "Current" button. After discharge, the charger will automatically begin charging.
- Weghachite: Repeatedly discharges and charges the battery to optimize its capacity and rejuvenate older batteries. This process can take several hours or even days depending on battery condition. Select "Refresh" mode with "Mode" button.
- Nwalee: Charges the battery fully, then discharges it to measure its actual capacity, and finally recharges it. This provides an accurate reading of the battery's health. Select "Test" mode with "Mode" button.
To select a program for a specific slot, first select the slot by pressing the "Display" button until the desired slot is highlighted, then use the "Mode" button to cycle through programs. Use the "Current" button to adjust current settings if applicable.
Nlekọta
- Jiri ákwà dị nro ma kpọọ nkụ hichaa chaja mgbe niile. Ejila ihe nhicha ma ọ bụ ihe mgbaze.
- Ensure the charging contacts are free of dust and debris for optimal connection.
- Chekwaa chaja n'ebe dị jụụ, kpọrọ nkụ mgbe anaghị eji ya.
- Zere idobe chaja ma ọ bụ tinye ya na mmetụta siri ike.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Chaja anaghị agba ọkụ. | No power supply; faulty adapter; loose connection. | Check power outlet; ensure adapter is securely connected to charger and wall/car socket; try a different outlet. |
| Battery not charging (display shows "ERR"). | Incorrect battery type (non-rechargeable); faulty battery; incorrect polarity; poor contact. | Ensure battery is NiMH/NiCd; try a different battery; reinsert battery with correct polarity; clean battery and charger contacts. |
| Charging process takes too long. | High capacity battery; low charging current selected; battery in "Refresh" or "Test" mode. | This is normal for high capacity batteries; increase charging current if possible; "Refresh" and "Test" modes are designed to take longer. |
| Ngosipụta adịchaghị ma ọ bụ na-egbuke egbuke. | Ọkụ ọkụ anaghị akwụsi ike. | Ensure stable power source; try a different outlet or adapter. |
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | 1001-0018 |
| Ụdị batrị dakọtara | NiMH / NiCd (Micro AAA, Mignon AA, Baby C, Mono D, 9V E-block) |
| Ntinye Voltage | 12V DC, 1.5A (via included AC adapter or car adapter) |
| Charging Programs | Chajịa, chụpụ, megharịa, nwaa |
| Ngosipụta | LCD nwere ọkụ azụ |
| Atụmatụ nchekwa | Reverse polarity protection, short circuit protection, overcharge protection, automatic shut-off |
| Akụkụ ngwaahịa | 5.59 x 6.67 x 1.56 sentimita (14.2 x 17.0 x 3.96 cm) |
| Ibu Ibu | 1.21 pound (0.55 n'arọ) |
| Onye nrụpụta | ANSMAN |
Figure 6: Dimensions of the Powerline 5 Pro charger, indicating a width of 17.0 cm and a height of 14.2 cm.
Akwụkwọ ikike na nkwado
ANSMANN products are manufactured with high quality standards. For warranty information and technical support, please refer to the official ANSMANN websaịtị ma ọ bụ kpọtụrụ ndị ahịa ha ozugbo. Debe nnata nzụta gị ka ihe akaebe nke ịzụrụ.
Maka enyemaka ọzọ, ị nwere ike ịga na Ansmann Store on Amazon.
