Flexson FLXP1WB2021

Flexson FLXP1WB2021 Wall Bracket for Sonos Play:1 Speakers

Akwụkwọ ntuziaka

Okwu mmalite

This manual provides instructions for the safe and proper installation and use of your Flexson FLXP1WB2021 Wall Bracket, designed specifically for Sonos Play:1 speakers. Please read this manual thoroughly before installation and retain it for future reference.

Ozi nchekwa

Ịdọ aka ná ntị:

Improper installation can lead to equipment damage or personal injury. If you are unsure about the installation process, consult a qualified professional.

  • Ensure the wall material is suitable for supporting the weight of the bracket and speaker.
  • Use appropriate wall mounting hardware (screws and anchors) for your specific wall type. Wall mounting hardware is not included with this product.
  • Do not exceed the maximum weight capacity of the bracket. This bracket is designed for Sonos Play:1 speakers only.
  • Debe obere akụkụ n'ebe ụmụaka nọ.

Ihe ngwugwu

Chọpụta na akụrụngwa niile dị tupu ịmalite nrụnye:

  • 2 x Flexson Wall Brackets (FLXP1WB2021)
  • Akwụkwọ ntuziaka (akwụkwọ a)

Mara: Sonos Play:1 speakers and wall mounting hardware (screws, anchors) are not included.

Ntọala na nwụnye

Follow these steps to install your Flexson wall bracket:

  1. Kwadebe Ebe Nkwanye: Choose a suitable wall location, ensuring it can support the weight of the speaker and bracket. Mark the desired drilling points for the wall bracket.
  2. Oghere pilot: Using an appropriate drill bit for your wall type and chosen mounting hardware, drill pilot holes at the marked locations.
  3. Tinye ihe nkwado mgbidi: Securely fasten the wall bracket to the wall using suitable screws and wall anchors (not supplied). Ensure the bracket is level and firmly attached.
  4. Attach Speaker to Bracket: The Flexson bracket features a unique 2-piece design for easy assembly. Align your Sonos Play:1 speaker with the bracket's mounting points. The bracket allows for neat cable routing.
  5. Ọkà okwu echedoro: Use the provided screw to secure the Sonos Play:1 speaker to the bracket. Ensure it is tightened sufficiently to hold the speaker firmly.
  6. Njikwa USB: Route the speaker's power cable neatly through the designated channels on the bracket to maintain a clean appearance.
Two black Flexson wall brackets for Sonos Play:1 speakers, showing the front with branding and model number.

Figure 1: Flexson FLXP1WB2021 Wall Brackets. These brackets are designed to securely hold Sonos Play:1 speakers.

Technical drawing showing dimensions of the Flexson wall bracket for Sonos Play:1, including side, front, and back views na nha na millimeters.

Figure 2: Dimensional drawing of the Flexson wall bracket, illustrating various measurements for installation planning.

Ọrụ na Ndozi

Once installed, the Flexson wall bracket offers flexible positioning for your Sonos Play:1 speaker:

  • Ntugharị: The bracket allows for a 15° downward tilt, enabling you to direct sound towards your listening area.
  • Na-agbagharị: You can swivel the speaker 40° left and 40° right to optimize sound dispersion.
  • Nkwanye tụgharịrị: The bracket supports mounting the speaker upside down. This feature allows easier access to the speaker's on-device controls when mounted higher on a wall.

Nlekọta

To maintain the appearance and functionality of your Flexson wall bracket:

  • Clean the bracket with a soft, dry cloth.
  • Zere iji ihe nhicha ma ọ bụ ihe mgbaze eme ihe, n'ihi na ihe ndị a nwere ike imebi njedebe ahụ.
  • Periodically check all mounting screws to ensure they remain tight and secure.

Nchọpụta nsogbu

NsogbuIhe nwere ike imeNgwọta
Speaker feels unstable or loose.Mounting screws are not tight enough, or incorrect wall anchors were used.Ensure all wall mounting screws and the speaker attachment screw are securely tightened. Verify that appropriate wall anchors were used for your wall type.
Difficulty adjusting tilt or swivel.Mechanism may be stiff or overtightened.Apply gentle force. Do not force adjustments if resistance is excessive. Check for any obstructions.

Nkọwapụta

  • Nọmba nlereanya: FLXP1WB2021
  • ndakọrịta: Sonos Play:1 Speakers
  • Ihe: Igwe igwe
  • Agba: Nwa
  • Ndozi Tilt: 15° downwards
  • Ndozi Swivel: 40° akaekpe, 40° aka nri
  • Akụkụ ngwaahịa: 5.47 x 3.62 x 1.77 sentimita (139 x 92 x 45 mm)
  • Ibu ihe: 7 ounce (198 grams)
  • Onye nrụpụta: FLEXSON

Akwụkwọ ikike na nkwado

For warranty information and technical support, please refer to the official Flexson websaịtị ma ọ bụ kpọtụrụ onye na-ere ahịa gị. Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.

Akwụkwọ ndị emetụtara - FLXP1WB2021

Tupuview Flexson P5-WMV Vertical Wall Mount for Sonos PLAY:5 / Five - Installation Guide
Official installation guide for the Flexson P5-WMV vertical wall mount, designed for Sonos PLAY:5 and Sonos Five speakers. Includes safety warnings, parts list, and step-by-step assembly instructions for secure wall mounting.
Tupuview Flexson E300WM Wall Mount for SONOS ERA 300 - Installation Guide
Detailed installation guide for the Flexson E300WM wall mount, designed for the SONOS ERA 300 speaker. Includes safety warnings, required hardware, and step-by-step instructions for mounting on brick, masonry, or wood studwork.
Tupuview Flexson E100WM Wall Mount Installation Guide for Sonos Era 100
Detailed instructions for installing the Flexson E100WM wall mount for the Sonos Era 100 speaker, covering both masonry and wood stud installations.
Tupuview Flexson S1-CM Ceiling Mount for Sonos One, One SL, Play:1 - Product Overview na nkọwapụta
Detailed information on the Flexson S1-CM Ceiling Mount for Sonos One, One SL, and Play:1 speakers. Features include high-grade steel construction, adjustable tilt and swivel, and integrated cable management. Available in white and black.
Tupuview Flexson SAR-WM Wall Mount for Sonos Arc - Secure TV Soundbar Mounting
Discover the Flexson SAR-WM Wall Mount, designed to securely position your Sonos Arc soundbar 30mm in front of your TV for an immersive audio experience. Precision engineered in the UK, it offers easy installation and optimal sound performance.
Tupuview Flexson ERA300-CM Ceiling Mount for Sonos ERA 300 - Secure Speaker Mounting
Discover the Flexson ERA300-CM Ceiling Mount, designed to securely hang your Sonos ERA 300 speaker. Features adjustable tilt and swivel for optimal sound positioning, with integrated cable management. Ideal for home and commercial use.