Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Humminbird Piranhamax 195c Fishfinder. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your fishing experience.
The Humminbird Piranhamax 195c features a 256 color 320V x 240H, 3.5-inch display with 1600 watts PTP power output, utilizing Dual Beam Sonar technology. Its design also facilitates a direct replacement for certain competitive in-dash models.
Figure 1: Humminbird Piranhamax 195c Fishfinder. This image shows the front view of the fishfinder unit, featuring its color display with sonar readings, and the control buttons below the screen. The model number "195c" is visible on the unit.
Ntọala na nwụnye
Proper installation is crucial for optimal performance of your Piranhamax 195c. This section outlines the general steps for mounting and connecting the unit.
Nhọrọ nkwụnye
- Tilt and Swivel Mount: The standard mounting option allows for flexible positioning and angle adjustment of the display unit.
- Optional In-Dash Mounting Kit: For a more integrated look, an optional kit is available for flush-mounting the unit into your boat's dashboard. Refer to the kit's specific instructions for detailed installation.
Njikọ Ike
Connect the power cable to a 12V DC power source. Ensure the connection is secure and protected from water ingress. It is recommended to connect the unit directly to the boat's battery or a dedicated fuse panel.
Nwụnye transducer
The transducer is a critical component for sonar operation. Install the transducer in a location that provides a clear, unobstructed view of the water beneath the boat. Common installation methods include transom mount, in-hull mount, or trolling motor mount. Consult the transducer's specific installation guide for detailed instructions and best practices to avoid cavitation and ensure accurate readings.
Ntuziaka ọrụ
This section covers the basic operation of your Piranhamax 195c Fishfinder.
Ịgbanyụ/ Gbanyụọ
Pịa ma jide IKE button (usually the leftmost button with a power symbol or menu symbol) to turn the unit on or off.
Ngosipụta na njikwa
The 3.5-inch color display shows sonar returns, depth, temperature, and other relevant information. Navigate through menus and adjust settings using the directional arrow buttons and the MENU or Họrọ bọtịnụ.
- Bọtịnụ menu: Na-abanye na menu isi maka mgbanwe ntọala.
- Arrow Buttons (Up/Down/Left/Right): Used for navigation within menus and adjusting values.
- Check/Select Button: Na-akwado nhọrọ ma ọ bụ na-abanye na obere menu.
Ọrụ Sonar
The Piranhamax 195c utilizes Dual Beam Sonar with frequencies of 200/455 kHz. The standard sonar coverage is 28 degrees.
- Na-edozi Mmetụta: Increase sensitivity to detect weaker returns (smaller fish, softer bottom) or decrease it to filter out noise. Access sensitivity settings via the menu.
- Oke omimi: The unit automatically adjusts the depth range, but you can manually set it for specific fishing conditions.
- Fish ID: The Fish ID feature interprets sonar returns and displays fish icons on the screen. While convenient, it is recommended to learn to interpret raw sonar returns for more accurate information.
Nlekọta
Regular maintenance ensures the longevity and performance of your fishfinder.
- Nhicha: Clean the display and unit housing with a soft, damp akwa . Ejila ihe nchacha abrasive ma ọ bụ ihe mgbaze.
- Nlekọta Transducer: Periodically inspect the transducer for marine growth or damage. Clean it gently with water and a soft brush if necessary. Avoid scratching the transducer face.
- Nchekwa: When not in use for extended periods, store the unit in a dry, temperate environment. Disconnect power to prevent battery drain.
Nchọpụta nsogbu
Akụkụ a na-enye azịza maka nsogbu nkịtị ị nwere ike izute.
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Enweghị ike | Loose power connection, blown fuse, dead battery. | Check all power connections. Inspect and replace fuse if necessary. Charge or replace battery. |
| No Sonar Reading / Erratic Readings | Transducer not submerged, dirty transducer, air bubbles under transducer, incorrect sensitivity setting. | Ensure transducer is fully in water. Clean transducer face. Reposition transducer to avoid air bubbles. Adjust sensitivity. |
| Screen Freezes / Unresponsive | Software glitch, power fluctuation. | Turn the unit off and then on again. Ensure stable power supply. |
If the issue persists, contact Humminbird customer support.
Nkọwapụta
Key technical specifications for the Humminbird Piranhamax 195c Fishfinder.
- Ụdị: Piranhamax 195c
- Nọmba akụkụ: 408700-1
- Ngosipụta nha: 3.5 sentimita asatọ
- Ụdị ngosi: 256 Color TFT
- Mkpebi: 320V x 240H pixels
- Sonar Standard: Igwe abụọ
- Standard Sonar Coverage: ogo 28
- Standard Sonar Frequency: 200/455 kHz
- Power Output (PTP): 1600 Watt
- Mmepụta Ike (RMS): 200 Watt
- Ntinye ike: 10-20 VDC
- Nhọrọ nkwụnye: Tilt and Swivel / Optional In-Dash Mounting Kit
- Akụkụ ihe (LxWxH): 5.25 x 1.12 x 5.12 sentimita asatọ
- Ibu ihe: 2 pound
Ozi akwụkwọ ikike
Humminbird products are designed for reliability and performance. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Humminbird website. Typically, Humminbird offers a limited warranty covering defects in materials and workmanship for a specified period from the date of purchase.
Mara: Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike.
Nkwado ndị ahịa
For technical assistance, service, or to purchase accessories, please contact Humminbird Customer Support.
- Nkwado n'ịntanetị: Visit the official Humminbird websaịtị maka Ajụjụ Ndị A Na-ajụkarị, ndebanye aha ngwaahịa, na akụrụngwa nkwado. www.humminbird.com/support
- Nkwado ekwentị: Refer to the Humminbird website or your product packaging for the most current contact numbers.
When contacting support, please have your product model number (Piranhamax 195c) and serial number ready.
