Juskys Montreal Racing Desk Chair User Manual

1. Okwu mmalite

Thank you for choosing the Juskys Montreal Racing Desk Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

The Juskys Montreal Racing Desk Chair is designed for comfort and ergonomic support, suitable for office, study, or gaming environments. It features a sporty design with a faux leather cover, thick padding, and adjustable functions to enhance your seating experience.

2. Ozi nchekwa

• Oke ibu kacha: This chair is designed to support a maximum weight of 120 kg. Do not exceed this limit to prevent damage or injury.
• Mgbakọ: Ensure all components are correctly assembled and tightened according to the instructions before use. Regularly check all screws and bolts for tightness.
• Nkwụsi ike: Always sit centrally on the chair. Avoid standing on the chair or using it as a step stool.
• Ntughari: Use caution when moving the chair, especially on uneven surfaces. Ensure no obstacles are in the path of the wheels.
• Ụmụaka: Keep small children away from the chair during assembly. This product contains small parts that could be a choking hazard.
• Nhicha: Refer to the maintenance section for proper cleaning procedures. Avoid using harsh chemicals that may damage the faux leather.

3. Ihe ngwugwu

Before beginning assembly, verify that all the following components are present in the box:

• Oche Backrest
• Oche oche
• Ogwe aka (2)
• Silinda ebuli gas
• Star Base (with five arms)
• Wheel (5)
• Efere Mechanism
• Hardware (screws, washers, Allen key)

Note: The chair includes 360° wheels, armrests, a high back, and a padded seat as main components.

4. Ntọala (Ntuziaka Mgbakọ)

Assembly is required for this product. Please follow these general steps. For detailed diagrams, refer to the separate assembly sheet included in your package.

1. Attach Wheels to Star Base: Insert each of the five wheels into the sockets at the end of each arm of the star base until they click securely into place.
2. Tinye Gas ebuli: Tinye silinda gas lift n'ime oghere etiti nke ntọala kpakpando a kpọkọtara.
3. Tinye efere usoro na oche: Secure the mechanism plate to the underside of the seat using the provided screws. Ensure the front of the mechanism plate aligns with the front of the seat.
4. Tinye ihe nkwado aka na oche na ihe nkwado azụ: Connect the armrests to both the seat base and the backrest using the designated screws. Do not fully tighten all screws until all components are aligned.
5. Jikọọ Oche na Igwe Mbuli Gas: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the central hole of the mechanism plate aligns with the top of the gas lift.
6. Mmechi ikpeazụ: Once all parts are in place and aligned, fully tighten all screws.

5. Ntuziaka ọrụ

Your Juskys Montreal Racing Desk Chair offers several adjustable features for personalized comfort:

• Ndozi elu: To adjust the seat height, locate the lever under the seat on the right side. While seated, pull the lever up to lower the chair. To raise the chair, stand up and pull the lever up. The seat height is adjustable between 46 cm and 56 cm.
• Ọrụ Swivel 360°: The chair is designed to rotate 360 degrees, allowing for easy movement and access to your workspace without needing to reposition the entire chair.
• Backrest Tilt: The backrest can be tilted to provide a more flexible seating position. Use the lever on the left side under the seat to unlock and recline the backrest. Push the lever back in to lock the backrest in your desired position.
• Ogwe aka: The padded armrests provide additional comfort and support for your arms.

6. Nlekọta

Proper care and maintenance will extend the life of your Juskys Montreal Racing Desk Chair:

• Nhicha: The faux leather material can be cleaned by wiping it with a damp cloth. For tougher stains, use a mild soap solution and then wipe with a clean, damp akwa . Zere ihe nhicha ma ọ bụ ihe mgbaze.
• Nlele anya mgbe niile: Periodically inspect all screws and bolts to ensure they are tight. Re-tighten if necessary.
• Nlekọta wheel: Keep the wheels free from hair, dust, and debris to ensure smooth movement.
• Zere ìhè anyanwụ kpọmkwem: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack. Position the chair away from direct sunlight when possible.

7. Nchọpụta nsogbu

Ọ bụrụ na ị hụ nsogbu na oche gị, lee nsogbu na ngwọta ndị a na-ahụkarị:

• Oche anaghị agbanwe elu ya: Ensure the height adjustment lever is fully engaged. Check if the gas lift cylinder is properly seated in the mechanism and base. If the issue persists, the gas lift may need replacement.
• Wheel anaghị agbagharị nke ọma: Inspect the wheels for any trapped debris, hair, or dust. Clean them thoroughly. Ensure the wheels are securely inserted into the star base.
• Oche ahụ na-adị ka ihe na-adịghị mma ma ọ bụ na-ama jijiji: Check all assembly screws and bolts, especially those connecting the armrests, seat, and backrest, as well as the mechanism plate to the seat. Tighten any loose fasteners. Ensure the star base is fully assembled and the gas lift is correctly inserted.
• Mkpọtụ na-eti mkpu: Apply a small amount of silicone lubricant to moving parts, such as the gas lift mechanism or wheel axles. Avoid oil-based lubricants on plastic components.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Juskys provides quality products, and any warranty claims should be directed to the point of purchase or the manufacturer directly.

If you require further assistance or have questions not covered in this manual, please contact the retailer where you purchased the chair or visit the official Juskys website for customer support contact details.