Aiphone VC-K Handset Audio Tenant Station User Manual

1. Okwu mmalite

The Aiphone VC-K Handset Audio Tenant Station is designed for use within Aiphone VC Series multi-tenant intercom systems. This unit provides private audio communication between a tenant and a visitor at the building entrance. Its durable ABS plastic construction ensures longevity and reliable performance in various residential or commercial settings.

This manual provides essential information for the proper installation, operation, and maintenance of your VC-K tenant station. Please read it thoroughly before installation and retain it for future reference.

2. Nchekwa nchekwa

Observe the following safety precautions to prevent injury to yourself or others and to avoid damage to the equipment.

Nchekwa Eletriki: Installation should be performed by qualified personnel in accordance with all local electrical codes and regulations. Disconnect power before performing any wiring or maintenance.
Ọnọdụ gburugburu: Do not expose the unit to extreme temperatures, high humidity, or direct water spray. Ensure the installation location is dry and protected.
Ijikwa: Jisie ihe ahụ nke ọma. Zere ịda ma ọ bụ mee ka ọ daa n'ihe ike.
Mgbanwe: Do not attempt to modify or disassemble the unit. Unauthorized modifications can lead to malfunction, electric shock, or fire, and will void the warranty.

3. Ihe ngwugwu

Chọpụta na ihe niile dị na ngwugwu:

Aiphone VC-K Handset Audio Tenant Station
Akụrụngwa mgbago (skru, arịlịka)
Akwụkwọ ntuziaka (akwụkwọ a)

4. Ntọala na nwụnye

The VC-K tenant station is designed for flush mounting and fits a standard 2-gang electrical box. Proper installation is crucial for optimal performance.

4.1. Ịhọrọ ebe nwụnye

Select a convenient indoor location, typically near the main entrance of the tenant's unit, where the handset can be easily accessed. Ensure the location allows for proper wiring to the main intercom system.

4.2. Ịkwanye Unit

Ensure power to the intercom system is disconnected at the circuit breaker.
Prepare a standard 2-gang electrical box in the chosen wall location.
Connect the necessary wiring from the intercom system to the VC-K unit's terminals. Refer to the wiring diagram provided with your VC Series master station for specific connections.
Carefully place the VC-K unit into the 2-gang box, ensuring wires are not pinched.
Secure the unit to the electrical box using the provided mounting screws. Do not overtighten.
Once mounted, restore power to the intercom system.

Aiphone VC-K Handset Audio Tenant Station, white, wall-mounted with coiled cord

Foto 1: Aiphone VC-K Handset Audio Tenant Station. This image shows the white, wall-mounted handset with its coiled cord hanging down, ready for use. The unit is designed for flush installation.

5. Ọrụ

The Aiphone VC-K Handset Audio Tenant Station provides straightforward communication with visitors at your building's entrance.

5.1. Ịnata oku

When a visitor presses the call button at the entrance station, your VC-K handset will ring. To answer the call:

Lift the handset from its cradle.
Speak into the mouthpiece and listen through the earpiece to communicate with the visitor.
To end the conversation, simply place the handset back into its cradle.

The handset design ensures privacy during conversations, preventing others in the room from overhearing the visitor's audio.

6. Nlekọta

The VC-K tenant station requires minimal maintenance to ensure continued reliable operation.

Nhicha: Wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the ABS plastic finish.
Nyocha: Periodically check the coiled cord for any signs of wear or damage. If the cord is damaged, contact a qualified technician for replacement.
Nlekọta gburugburu: Ensure the unit remains in a dry, indoor environment. Protect it from direct sunlight and excessive heat.

7. Nchọpụta nsogbu

If you experience issues with your VC-K Handset Audio Tenant Station, refer to the following common problems and solutions:

Nsogbu	Ihe nwere ike ime	Ngwọta
No audio from handset (earpiece)	Loose wiring connection; faulty handset; issue with master station or wiring.	Check wiring connections at the back of the unit. Ensure the handset is properly seated. If the problem persists, consult your installer or Aiphone support.
No audio to visitor (mouthpiece)	Loose wiring connection; faulty handset; issue with master station or wiring.	Check wiring connections. Ensure the handset is properly seated. If the problem persists, consult your installer or Aiphone support.
Handset does not ring	No power to the system; faulty wiring; issue with entrance station or master station.	Verify power to the entire intercom system. Check wiring. Test the entrance station. If the problem persists, consult your installer or Aiphone support.
Nkwurịta okwu na-adịte aka	Loose wiring; interference; damaged cord.	Inspect all wiring connections. Check the handset cord for damage. Ensure no strong electrical interference sources are nearby.

If these troubleshooting steps do not resolve the issue, contact your system installer or Aiphone technical support for further assistance.

8. Nkọwapụta

Ụdị: VC-K
Akụkụ ngwaahịa: 9.8 x 3.6 x 2.3 sentimita (24.9 x 9.1 x 5.8 cm)
Ibu ihe: 1.05 pound (0.48 n'arọ)
Ihe: ABS plastic construction
Agba: Ọcha
Ụdị ekwentị: Ejiri ya
Isi mmalite ike: Corded Electric (powered by intercom system)
Ụdị ọkpụkpọ: Single Keypad (refers to system functionality, not on handset)
Ụdị Sistemu na-aza: Digital (refers to system functionality)
Ngwa dakọtara: VC-M Master Station, Additional Tenant Handsets (VC Series)
Ịkwanye: Flush mount, fits 2-gang box

9. Nkwado na akwụkwọ ikike

For technical assistance, installation inquiries, or warranty information, please contact your authorized Aiphone dealer or the Aiphone Corporation directly. Refer to the official Aiphone websaịtị maka nkọwa kọntaktị kachasị ọhụrụ na akụrụngwa nkwado.

Aiphone Corporation: www.aiphone.com

Please have your product model number (VC-K) and any relevant system information ready when contacting support.

	Ọdụ Ndị Nọ n'Aiphone GT-2C: Ntuziaka Ọrụ Dị Mkpa Mụta ọrụ ndị bụ isi nke ọdụ Aiphone GT-2C Tenant, gụnyere bọtịnụ ọrụ, ọkọnọ ike, na njikwa maka atụmatụ intercom na nchekwa. Nduzi a na-akọwa ọrụ bọtịnụ, ihe akara pụtara, na njikwa sistemụ.
	Ntuziaka ọrụ Aiphone GT-1C Tenant Station Ntuziaka ọrụ zuru oke maka ọdụ Tenant Aiphone GT-1C. Mụta maka isi iyi ike ya, ihuenyo LCD, ọkà okwu, igwe okwu, yana ọrụ nke bọtịnụ dị ka mwepụta ọnụ ụzọ, Nhọrọ, Nchekwa, Okwu na Gbanyụọ, yana njikwa akụkụ maka nchapụta, olu na mbugharị.
	Aiphone Type GT Intercom App Operation Manual This operation manual provides detailed instructions for using the Aiphone Type GT Intercom App on iOS and Android devices. Learn how to configure settings, answer calls, manage door releases, handle emergency alarms, and view recordings for enhanced home or building communication.
	Ntuziaka Ọrụ Ọdụ Ndị Tenant Aiphone GT-1C7 Nduzi a na-enye ozi gbasara ọrụ dị mkpa maka Aiphone GT-1C7 Tenant Station, na-akọwapụta bọtịnụ dị iche iche ya, njikwa ya, na ọrụ ya maka nkwukọrịta na nchekwa.
	Ntuziaka Ọrụ Ọdụ Ndị Tenant Aiphone GT-1M3 Nduzi dị nkenke maka ọrụ na ọrụ ndị bụ isi nke Aiphone GT-1M3 Tenant Station, njikwa na atụmatụ maka iwuli sistemụ intercom.
	Ntuziaka ọrụ Aiphone GT Series Tenant Station Ntuziaka dị nkenke maka ọrụ ndị bụ isi nke Aiphone GT Series Tenant Station, na-ekpuchi ndakọrịta enyemaka ịnụ ihe, isi iyi ọkụ, ọrụ ekwentị, njikwa olu chime na ọrụ bọtịnụ.

Aiphone VC-K