1. Okwu mmalite
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Defiant Hartford Aged Bronze Privacy Knob. Please read these instructions carefully before beginning installation to ensure proper function and longevity of your product. This privacy knob is designed for use on interior doors where a locking function is desired, such as bedrooms or bathrooms.
2. Ozi nchekwa
- Always wear appropriate personal protective equipment, such as safety glasses, during installation.
- Use the correct tools for the job. Refer to the 'Tools Required' section.
- Debe obere akụkụ n'ebe ụmụaka nọ iji gbochie ihe egwu ịkpagbu.
- Do not force components during installation. If parts do not fit, re-check the instructions.
- Ensure the door is properly supported if removed from its hinges during installation.
3. Ihe ngwugwu
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact Defiant customer support.
- Exterior Knob Assembly
- Interior Knob Assembly
- Latch Mechanism
- Efere efere
- Ịkwanye kposara
- Privacy Pin/Emergency Key
4. Ntọala (Nwụnye)
Follow these steps for a successful installation of your Defiant Hartford Aged Bronze Privacy Knob.
Figure 1: All components of the Defiant Hartford Aged Bronze Privacy Knob.
4.1. Ngwa achọrọ
- Phillips Isi Ihe Nleghari
- Ihe teepu
- Pensụl
- Chisel (optional, for strike plate)
4.2. Kwadebe Ọnụ ụzọ
- Ensure your door has standard bore holes (typically 2-1/8 inches diameter for the knob and 1 inch diameter for the latch).
- Measure the backset (distance from the door edge to the center of the knob hole). This knob is designed for standard 2-3/8 inch or 2-3/4 inch backsets. Adjust the latch mechanism if necessary.
4.3. Install the Latch Mechanism
- Insert the latch mechanism into the hole on the edge of the door, ensuring the bevel of the latch bolt faces the door frame.
- Secure the latch mechanism with the two small screws provided. Ensure it is flush with the door edge.
4.4. Install the Exterior Knob
- Insert the spindle (the square shaft) of the exterior knob assembly through the square hole in the latch mechanism.
- Ensure the exterior knob is oriented correctly (e.g., the privacy pin hole on the interior side of the knob is facing the correct direction for the interior knob).
4.5. Install the Interior Knob
- Align the interior knob assembly with the exterior knob assembly, ensuring the posts from the exterior knob pass through the holes in the interior knob's mounting plate.
- Secure the interior knob assembly to the exterior knob assembly using the longer mounting screws. Tighten evenly until snug, but do not overtighten.
4.6. Wụnye efere Strike
- Close the door and mark the door frame where the latch bolt strikes.
- Chisel out a shallow recess in the door frame to allow the strike plate to sit flush.
- Secure the strike plate to the door frame with the remaining screws.
4.7. Nyochaa Ọrụ
- Turn both knobs to ensure the latch retracts smoothly.
- Test the privacy locking function by pressing the button/pin on the interior knob. The exterior knob should lock.
- To unlock from the exterior, use the emergency key/pin provided to insert into the small hole on the exterior knob and push.
5. Operating the Privacy Knob
- Iji kpọchie: From the interior side, press the button or insert and turn the privacy pin on the center of the interior knob. This will prevent the exterior knob from turning.
- Ka ịkpọghee: From the interior side, simply turn the interior knob. This will automatically release the lock.
- Emergency Unlock (from exterior): In case of emergency or accidental lockout, insert the provided emergency key/pin into the small hole on the center of the exterior knob and push firmly to disengage the lock.
6. Nlekọta
Your Defiant Hartford Aged Bronze Privacy Knob requires minimal maintenance to ensure long-lasting performance.
- Nhicha: Clean the knob surfaces with a soft, damp ákwà. Zere ihe nhicha, ihe mgbaze, ma ọ bụ kemịkalụ siri ike, n'ihi na ihe ndị a nwere ike imebi njedebe.
- mmanu mmanu: If the latch mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts of the latch bolt. Do not use oil-based lubricants as they can attract dust and grime.
- Ihe nkedo na-agbatị: Periodically check and tighten any loose mounting screws to ensure the knob remains securely attached to the door.
7. Nchọpụta nsogbu
If you encounter issues with your privacy knob, refer to the following common problems and solutions:
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Knob is loose or wobbly. | Ihe nkedo skru adịghị atọ ụtọ. | Tighten the mounting screws on the interior knob assembly. |
| Latch bolt does not retract smoothly. | Dirt buildup or lack of lubrication. | Clean the latch mechanism and apply a silicone-based lubricant. |
| Door does not latch or close properly. | Strike plate misalignment or incorrect installation. | Adjust the strike plate position on the door frame. Ensure the latch bolt is fully extending. |
| Privacy lock does not engage/disengage. | Internal mechanism misalignment or damage. | Re-check installation steps. If issue persists, contact customer support. |
8. Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Nọmba nlereanya | TGX710 |
| Ihe onwunwe | Ọla |
| Agba/Mechaa | Bronze mere agadi |
| Ụdị mkpọchi | Privacy (Push-button/Pin Lock) |
| Ojiji akọwapụtara | Interior Doors (e.g., Bedroom, Bathroom) |
| Ibu Ibu | 15.5 ounces (ihe dị ka) |
| Onye nrụpụta | Taiwan Fu Hsing Industrial Company |
| UPC | 050134109490 |
9. Akwụkwọ ikike na nkwado
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Defiant websaịtị. Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.
For further assistance, you may contact Defiant customer service directly through their official channels.
