Feit Electric LEDR56/827 Dimmable LED Retrofit Kit User Manual

1. Ngwaahịa gafereview

The Feit Electric LEDR56/827 Dimmable LED Retrofit Kit is an energy-efficient lighting solution designed to replace traditional incandescent bulbs in 5-inch and 6-inch recessed can fixtures. This kit provides 1250 lumens of 2700K soft white light, equivalent to a 120-watt incandescent bulb, while consuming only 20.5 watts. It is fully dimmable and offers instant brightness, with an estimated lifespan of up to 50,000 hours (approximately 45.7 years based on 3 hours/day usage). The kit is Energy Star approved and includes a standard base adapter and a pre-mounted trim for easy installation.

Image 1.1: Packaging for the Feit Electric LEDR56/827 Dimmable LED Retrofit Kit, highlighting its 120W equivalent brightness and energy efficiency.

Akụkụ ndị bụ isi:

• Ike dị irè: 20.5W power consumption, 120W incandescent equivalent.
• Icha ọkụ dị elu: 1250 lumen.
• Okpomọkụ agba: 2700K Soft White.
• Enwere ike ibelata: Fully dimmable for adjustable light levels.
• Ogologo ndụ: Up to 50,000 hours (45.7 years).
• ndakọrịta: Fits most 5-inch and 6-inch recessed cans.
• Asambodo: Energy Star approved.

2. Ozi nchekwa

Before installing or servicing this product, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• Ịdọ aka ná ntị: Ihe ize ndụ nke ujo eletrik. Kwupu ike na fiusi ma ọ bụ sekit breaker tupu echichi ma ọ bụ ọrụ.
• Ịdọ aka ná ntị: Risk of fire. Do not install this product in a luminaire that exceeds the wattage nke bọlbụ.
• This product is for use with 120V, 60Hz circuits.
• Kwesịrị ekwesị maka damp ebe.
• Do not use with standard dimmers unless specified as compatible. Use only with dimmers designed for LED products.
• Ensure the recessed can fixture is properly grounded.
• Agbalịla ịgbanwe ngwaahịa ahụ. Mgbanwe ọ bụla nwere ike imebi akwụkwọ ikike ahụ ma mepụta ihe egwu nchekwa.
• Zere ụmụaka.

Atụmatụ ịdọ aka ná ntị 65: Ngwaahịa a nwere ike ịnwe kemịkalụ mara steeti California na-ebute ọrịa kansa, ntụpọ ọmụmụ, ma ọ bụ mmerụ ahụ ọmụmụ ọzọ.

3. Ihe ngwugwu

Nyochaa na akụrụngwa niile dị tupu ịmalite nrụnye.

• 1x LED Retrofit Kit (integrated LED trim)
• 1x Standard Base Adapter (E26 screw-in adapter)

Image 3.1: The LED retrofit kit components, including the main LED light unit and the screw-in adapter.

4. Ntuziaka nwụnye

This retrofit kit is designed for easy installation into existing 5-inch or 6-inch recessed can housings. No tools are typically required.

1. Gbanyụọ ike: Before starting, ensure the power to the recessed fixture is turned off at the circuit breaker or fuse box to prevent electrical shock.
2. Wepụ bọlbụ dị adị ma bee ya: Carefully remove the existing light bulb and any old trim from the recessed can fixture.
3. Screw in Adapter: Screw the provided standard base (E26) adapter into the light socket of the recessed can. Ensure it is securely tightened.
4. Jikọọ Wiring: Locate the orange connector on the LED retrofit kit. Plug this connector into the corresponding connector on the standard base adapter.
5. Insert into Can: Gently push the LED retrofit kit into the recessed can opening. The spring clips on the sides of the LED unit will secure it in place against the ceiling. Ensure the trim is flush with the ceiling.
6. Weghachi ike: Once the kit is securely installed, restore power at the circuit breaker.
7. Nnwale Ule: Gbanwuo ọkụ iji chọpụta ọrụ kwesịrị ekwesị.

Image 4.1: Detail of the LED retrofit kit, illustrating the spring clips for securing it in the recessed can and the connector for the E26 adapter.

5. Ntuziaka ọrụ

The Feit Electric LEDR56/827 retrofit kit operates like a standard light fixture but offers dimming capabilities.

Agbanye/ Gbanyụọ:

Use your existing wall switch to turn the light fixture on or off. The LED will provide instant full brightness.

Ọrụ mmechi:

This LED retrofit kit is fully dimmable. To utilize the dimming feature, ensure you have an LED-compatible dimmer switch installed. Adjust the dimmer switch to achieve your desired light level. The 2700K Soft White color temperature provides a warm, inviting glow, ideal for living rooms, bedrooms, and dining areas.

Image 5.1: Visual representation of various color temperatures. This product provides 2700K Soft White light.

Image 5.2: A guide to choosing light temperatures, indicating that Soft White (2700K-3000K) is ideal for living rooms and resembles standard incandescent bulbs.

6. Nlekọta

The Feit Electric LEDR56/827 LED Retrofit Kit requires minimal maintenance due to its long lifespan and integrated LED design.

• Nhicha: Ensure power is off before cleaning. Wipe the trim and diffuser with a soft, dry, or slightly damp Ákwà. Ejila ihe nhicha ma ọ bụ ihe mgbaze, n'ihi na ha nwere ike imebi ihe ndị dị na ya ma ọ bụ ihe ndị dị na eletriki.
• Ngbanwe LED: The LEDs are integrated and not user-replaceable. The unit is designed for a long operational life. If the LED fails, the entire unit should be replaced.
• Nyocha: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.

7. Nchọpụta nsogbu

If you experience issues with your LED retrofit kit, refer to the following common problems and solutions:

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

According to the product specifications, there is no explicit warranty provided for this item. For technical support or inquiries regarding the Feit Electric LEDR56/827 Dimmable LED Retrofit Kit, please contact Feit Electric customer service.

Ị nwere ike ịchọta ozi kọntaktị na onye ọrụ mmepụta ihe websaịtị ma ọ bụ na nkwakọ ngwaahịa.

Igwe ọkụ eletrik Websaịtị: www.feit.com