NEC NP-V260 DLP Projector Instruction Manual

1. Okwu mmalite

This manual provides essential information for the safe and efficient operation of your NEC NP-V260 DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference. This projector is designed for presenting high-definition content with 2600 ANSI lumens brightness.

2. Nhazi

2.1 Mwepu na ọdịnaya

Jiri nlezianya wepụ projector na ngwa niile na nkwakọ ngwaahịa. Chọpụta na akụrụngwa niile dị:

• NEC NP-V260 DLP Projector
• Ụdọ ọkụ
• Njikwa anya (ọ bụrụ na etinyere ya)
• Akwụkwọ ntuziaka (akwụkwọ a)

2.2 Ndobe ihe nrụpụta

Place the projector on a stable, level surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. Maintain a suitable distance from the screen for the desired image size.

2.3 Ijikọ ike

1. Jikọọ eriri ọkụ eletrik ahụ na ntinye AC nke ihe ngosi ahụ.
2. Tinye nsọtụ nke ọzọ nke eriri ọkụ n'ime oghere eletrik gbadoro ụkwụ.

2.4 Isi mmalite ntinye eji ejikọta

The NEC NP-V260 supports various input sources. Connect your device to the appropriate port:

• HDMI: Maka vidiyo dijitalụ na ọdịyo dị elu.
• USB: For connecting USB devices or for firmware updates.
• Network (Wired & Wireless): For network control and content streaming, if supported by your model.

2.5 Agbanye ike mbụ

Press the power button on the projector or remote control to turn on the unit. The power indicator light will change color, and the projector lamp ga-enwu enwu.

2.6 Mgbanwe Nlekwasị Anya na Mbugharị

This image displays the top panel of the NEC NP-V260 projector. Visible features include the focus and zoom rings on the lens, the NEC logo, a warning label for lamp type NP18LP, and the control panel with menu navigation buttons, source selection, and power button.

Adjust the focus ring around the lens until the projected image is sharp and clear. Use the zoom ring to adjust the image size to fit your screen.

3. Ntuziaka ọrụ

3.1 Njikwa ntọala

The projector features an on-board control panel. The main controls include:

• Bọtịnụ ike: Gbanyụọ ma ọ bụ gbanyụọ projector.
• Isi mmalite: Cycles through available input sources (HDMI, USB, Network).
• Bọtịnụ menu: Na-abanye na menu Ngosipụta Ihuenyo (OSD).
• Bọtịnụ igodo nsoroụzọ (elu/ala/ekpe/aka nri): Used to navigate through OSD menus.
• Tinye bọtịnụ: Na-akwado nhọrọ dị na menu OSD.
• Wepụ bọtịnụ: Exits the current OSD menu or returns to the previous level.

3.2 Navigating the On-Screen Display (OSD)

Pịa NchNhr button to open the OSD. Use the navigation buttons to highlight options and the Banye button to select. Adjust settings such as picture mode, aspect ratio, and keystone correction.

3.3 Adjusting Picture Settings

Within the OSD, navigate to the 'Picture' or 'Image' menu to adjust:

• Icha ọkụ: Controls the overall lightness or darkness of the image.
• Ntughari: Adjusts the difference between the lightest and darkest parts of the image.
• Agba: Modifies the intensity of colors.
• Agba: Adjusts the balance between red and green colors (NTSC only).
• Nkọ: Enhances or softens image edges.
• Akụkụ akụkụ: Selects the display format (e.g., 4:3, 16:9, Auto).

3.4 Shutting Down the Projector

Press the power button twice (or as indicated by the on-screen prompt) to safely shut down the projector. Allow the projector to cool down completely before unplugging or moving it.

4. Nlekọta

4.1 Ihicha oghere

Gently wipe the projector lens with a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive cleaners or excessive force.

4.2 Na-ehicha ihe nzacha ikuku

Regularly clean the air filter to ensure proper ventilation and prevent overheating. Refer to the projector's specific instructions for filter removal and cleaning. A clogged filter can significantly reduce lamp life and projector performance.

4.3 Lamp Ndochi

Onye na-eme ihe nkiri lamp (Type: NP18LP) has a finite lifespan. When the lamp indicator light illuminates or the image becomes dim, it is time to replace the lamp. Always use genuine NEC replacement lamps. Lee nkọwa zuru ezu nke lamp replacement procedure in the full user manual for safety precautions and steps.

4.4 Nchekwa

When not in use for extended periods, store the projector in a cool, dry place, protected from dust and extreme temperatures. Use the original packaging or a protective case if available.

5. Nchọpụta nsogbu

Ọ bụrụ na ị hụ nsogbu na ihe nlereanya projektọ gị, gakwuru usoro ndị a na-emekarị iji dozie nsogbu ndị a:

• Enweghị onyonyo: Ensure the power cord is securely connected, the projector is turned on, and the correct input source is selected. Check the connection cable between the projector and the source device.
• Onyonyo na-adịghị ahụkebe: Gbanwee mgbanaka elekwasị anya na oghere. Gbaa mbọ hụ na edobere ihe nrụpụta ahụ n'ebe dị anya kwesịrị ekwesị site na ihuenyo.
• Enweghị ụda: Verify that the audio cable is connected (if using an analog input), the volume is turned up on both the projector and the source device, and the correct audio input is selected. HDMI connections typically carry audio automatically.
• Igwe ọkụ na-ekpo oke ọkụ: Ensure air vents are not blocked. Clean the air filter. Operate the projector in a well-ventilated area.
• Lamp Ihe ngosi ọkụ: This indicates the lamp is nearing its end of life or has failed. Replace the lamp (Type: NP18LP).

For more complex issues, contact NEC customer support or a qualified service technician.

6. Nkọwapụta

7. Akwụkwọ ikike na nkwado

7.1 Ozi akwụkwọ ikike

The NEC NP-V260 DLP Projector is covered by a limited warranty. Please refer to the warranty card included with your product or visit the official NEC websaịtị maka usoro na ọnọdụ zuru ezu. Debe ihe akaebe nke ịzụrụ ihe gị maka nkwupụta nkwa.

7.2 Nkwado ndị ahịa

For technical assistance, service, or further inquiries, please contact NEC customer support. You can find contact information and support resources on the official NEC Display Solutions websaịtị: www.necdisplay.com/support