Elero MonoTel 2 Remote Control User Manual

1. Okwu mmalite

The Elero MonoTel 2 is a pure white, 1-channel remote control operating at an 868 MHz wireless radio frequency. It is designed for convenient control of roller shutters, blinds, and awnings. This manual provides essential information for the setup, operation, and maintenance of your device.

Foto 1: N'ihu view of the Elero MonoTel 2 Remote Control. The device is white with a dark grey base, featuring three central buttons: an upper square button, a circular button with an orange ring, and a lower square button. The Elero logo is visible on the dark grey base.

2. Atụmatụ igodo

• Easy-to-use On/Off Buttons: Designed for intuitive control with a clear LED viewwindow.
• Magnetic Wall Mount: For convenient storage and accessibility.
• Akwadoro batrị: Uses common batteries (not included).
• Ndakọrịta nke ukwuu: Supports both unidirectional and bidirectional radio systems.
• Nhọrọ njikwa dị elu: Allows for intermediate positioning and ventilation functions.

3. Nhazi

3.1. Ntinye batrị

1. Chọta ebe batrị dị n'azụ nke njikwa anya.
2. Mepee mkpuchi ụlọ.
3. Insert the required common batteries, ensuring correct polarity (+/-).
4. Mechie mkpuchi nke batrị batrị nke ọma.

3.2. Ijikọta na onye nnata

Refer to the instruction manual of your Elero receiver (e.g., for roller shutters, blinds, or awnings) for specific pairing procedures. Generally, this involves:

• Activating the programming mode on your receiver.
• Pressing a specific button sequence on the MonoTel 2 remote control within a set timeframe.
• Confirming successful pairing, often indicated by an LED on the receiver or the remote.

3.3. Mgbidi Ugwu nwụnye

The MonoTel 2 comes with a magnetic wall mount. Choose a suitable location, ensuring it is within range of your controlled devices. Secure the wall mount using appropriate screws (not included) and then simply attach the remote control to the magnetic mount.

4. Ntuziaka ọrụ

The MonoTel 2 remote control features three primary buttons for operation:

• Upper Square Button: Typically used for Up or Mepee functions (e.g., raising a shutter).
• Circular Button (with orange ring): Ọrụ dị ka Kwụsị or Ọnọdụ etiti button. Pressing it during movement will stop the device. A quick press can activate a pre-set intermediate position.
• Lower Square Button: Typically used for Ala or Mechie functions (e.g., lowering a shutter).

4.1. Isi njikwa

• To move the device up/open: Pịa Upper Square Button.
• To move the device down/close: Pịa Lower Square Button.
• Iji Kwụsị the device: Press the Circular Button n'oge mmegharị.

4.2. Intermediate Position and Ventilation

If configured with your receiver, a short press of the Circular Button can activate a pre-programmed intermediate position. Consult your receiver's manual for programming these advanced functions.

5. Nlekọta

5.1. Nhicha

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface.

5.2. Ngbanwe batrị

When the LED viewing window indicates low battery or the remote's range decreases, replace the batteries as described in the "Battery Installation" section (3.1). Dispose of old batteries responsibly according to local regulations.

6. Nchọpụta nsogbu

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elero websaịtị. Debe ihe akaebe nke ịzụrụ maka akwụkwọ ikike.

Manufacturer: Elero