KERBL PrimaFlex Applicator Spare Parts Set Instruction Manual

1. Okwu mmalite

This manual provides essential instructions for the installation and maintenance of the KERBL PrimaFlex Applicator Spare Parts Set. This kit is designed to replace worn or damaged components of your PrimaFlex Ear Tag Applicator, ensuring its continued functionality and reliability. Please read these instructions carefully before attempting any replacement.

2. Ihe ngwugwu

The KERBL PrimaFlex Applicator Spare Parts Set includes the following components:

• One (1) Red Plastic Insert
• One (1) Black Plastic Insert
• Two (2) Metal Springs

This image displays the complete contents of the spare parts kit: a black plastic insert, a red plastic insert, and two coiled metal springs. These components are designed for replacement in the PrimaFlex Ear Tag Applicator.

3. Ndakọrịta

This spare parts set is specifically designed for use with the KERBL PrimaFlex Ear Tag Applicator, suitable for ear tag sizes 0 through 3. Ensure your applicator model is compatible before attempting installation.

4. Ntuziaka nwụnye

Ịkpachara anya: Always ensure the applicator is clean and free from debris before performing any maintenance or part replacement. Handle springs with care to prevent injury.

1. Identify Worn Parts: Carefully inspect your PrimaFlex Applicator to determine which specific parts (red insert, black insert, or springs) require replacement.
2. Wepu akụkụ ochie: Depending on the part, gently pry or unhook the old component from its position within the applicator. For springs, note their original placement and orientation.
3. Insert New Plastic Parts: Align the new red or black plastic insert with its corresponding slot in the applicator. Press firmly until it clicks securely into place. Ensure it moves freely without obstruction.
4. Install New Springs: Carefully position the new springs into their designated locations. Ensure they are seated correctly and provide the necessary tension for the applicator's mechanism.
5. Ọrụ nnwale: After replacing the parts, operate the applicator several times without an ear tag to confirm smooth operation and proper spring action.

5. Nlekọta

To prolong the life of your PrimaFlex Applicator and its spare parts:

• Nhicha: Regularly clean the applicator, especially after use, to remove dirt, debris, or ear tag residue. Use a damp akwa na ncha dị nro ma ọ bụrụ na ọ dị mkpa.
• Nyocha: Periodically inspect all moving parts, including the inserts and springs, for signs of wear, damage, or corrosion. Replace parts from this kit as needed.
• Nchekwa: Store the applicator in a clean, dry place away from extreme temperatures and direct sunlight.

6. Nchọpụta nsogbu

If your PrimaFlex Applicator is not functioning correctly after replacing parts, consider the following:

• Akụkụ anaghị adabara: Ensure you have the correct spare parts set for your specific PrimaFlex Applicator model. Verify that each part is oriented correctly during installation.
• Applicator Sticking/Not Smooth: Check for any debris obstructing the movement of the new inserts or springs. Ensure springs are properly seated and not bent.
• Insufficient Tension: If the applicator lacks proper tension, verify that the springs are correctly installed and are not damaged or stretched.

If issues persist, consult the original applicator manual or contact KERBL customer support.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

Information regarding warranty coverage for this spare parts set is typically provided with the original PrimaFlex Applicator purchase or can be obtained directly from KERBL. For product support, technical assistance, or to inquire about warranty details, please contact KERBL customer service through their official websaịtị ma ọ bụ onye na-ere ahịa ebe a zụrụ ngwaahịa ahụ.