Graco Affix Highback Booster Seat with Latch System Instruction Manual

1. Okwu mmalite

This manual provides essential instructions for the proper installation, use, and maintenance of your Graco Affix Highback Booster Seat with Latch System. This booster seat is designed to safely transport children weighing 40 to 100 lb and up to 57 inches tall. The Latch system provides a secure connection to your vehicle seat, facilitating independent buckling for your child. Always secure your child using the vehicle's lap/shoulder belt.

Image 1.1: The Graco Affix Highback Booster Seat, showcasing its design and color scheme.

2. Ntọala na nwụnye

2.1 Latch System Connection

The one-hand front-adjust Latch system secures the booster seat to the vehicle. This system is intended to keep the booster seat stable when unoccupied and to assist with independent buckling. It is not used for child restraint during travel; the vehicle's lap/shoulder belt is used for this purpose.

1. Locate the Latch connectors on the booster seat.
2. Press the red button on the Latch connector to release it.
3. Attach the Latch connectors to your vehicle's lower anchor bars.
4. Pull the front-adjust strap to tighten the Latch system, ensuring the booster seat is securely fastened to the vehicle seat.

Image 2.1: A hand demonstrating the adjustment of the one-hand front-adjust Latch system to secure the booster seat to the vehicle.

Ntinye 2.2 Cup njide

The cup holder must be installed before use. It is located in a compartment at the bottom of the booster seat base.

1. Remove the cup holder from its storage compartment in the bottom of the base.
2. Align the tabs on the side and bottom of the cup holder with their corresponding slots in the booster seat base.
3. Press the cup holder firmly into place until it clicks. Once attached, the cup holder should not be removed.

2.3 mmezi isi oche

The headrest is fully adjustable to accommodate your child's growth and ensure proper fit of the vehicle's shoulder belt.

1. Locate the headrest adjustment lever, typically at the top of the headrest.
2. Squeeze the lever and slide the headrest up or down to the desired height.
3. Ensure the shoulder belt guide is positioned correctly, just above your child's shoulders, allowing the vehicle's shoulder belt to rest flat across the middle of their shoulder.

3. Ntuziaka ọrụ

3.1 Ịchekwa Nwa Gị

The Graco Affix Highback Booster Seat is designed for children aged 4-10 years, weighing 40-100 lb, and up to 57 inches tall. Always use the vehicle's lap/shoulder belt to secure your child.

1. Position your child in the booster seat.
2. Guide the vehicle's lap belt across your child's upper thighs, ensuring it sits low on the hips.
3. Thread the vehicle's shoulder belt through the red shoulder belt guide on the booster seat's headrest.
4. Ensure the shoulder belt rests flat across the middle of your child's shoulder and chest, not on their neck or arm.
5. Buckle the vehicle's seat belt and pull any slack to ensure a snug fit.

Image 3.1: A child demonstrating how to buckle into the booster seat using the vehicle's seat belt.

3.2 Ngwakọta ọnụ

• Onye njide iko: The integrated cup holder keeps drinks and snacks accessible for your child.
• Hideaway Storage: A small compartment is available for storing personal items.
• Full Coverage Back Support: The booster provides continuous back support as your child grows.
• Energy-Absorbing Foam: Equipped with EPS, energy-absorbing foam for effective impact management.

4. Nlekọta na nhicha

4.1 Nhicha Oche Pad

The seat padding is machine-washable for easy cleaning.

1. Rụtụ aka na nlekọta ahụ tag on the seat pad for specific washing instructions.
2. Typically, machine wash in cold water on a delicate cycle.
3. Drip dry; do not use bleach.

4.2 Cleaning Metal and Plastic Parts

Metal and plastic components can be cleaned with mild soap and cool water.

1. Jiri mgbasa ozi hichapụ elu eluamp akwa na ngwọta ncha dị nro.
2. Sachaa nke ọma na ihe dị ọcha, damp akwa .
3. Hapụ akụkụ niile ka ha kpọọ nkụ kpamkpam tupu e tinyegharịa ha ma ọ bụ jiri ha.

For comprehensive cleaning instructions, please refer to the full user guide.

5. Nchọpụta nsogbu

If you encounter any issues with your Graco Affix Highback Booster Seat, please review the following general advice:

• Ntinye dị nro: Ensure the Latch system is properly tightened and the vehicle's seat belt is snug. Re-read the installation steps in Section 2.
• Belt Fit Issues: Adjust the headrest height to ensure the shoulder belt lies flat across your child's shoulder and chest. The lap belt should be low on the hips.
• Akụkụ na-efu: Verify all components are present by checking the product packaging and comparing with the parts list in the full user guide.

For persistent problems or specific concerns, consult the detailed user guide or contact Graco customer support.

6. Nkọwapụta

Image 6.1: Visual representation of the booster seat's dimensions: 15.5 inches deep, 16.5 inches wide, and 26.75 inches high.

7. Akwụkwọ ikike na nkwado

7.1 Ozi akwụkwọ ikike

For detailed information regarding the product warranty, please refer to the documentation included with your purchase or visit the official Graco websaịtị. Usoro na ọnọdụ akwụkwọ ikike nwere ike ịdị iche.

7.2 Nkwado ndị ahịa

If you require assistance, have questions, or need to report an issue, please contact Graco customer service. You can find contact information on the official Graco website or in the full user guide.

A comprehensive user guide in PDF format is available for download: Graco Affix Highback Booster Seat User Guide (PDF)