Ozi mmalite na nchekwa
Thank you for choosing the Bestron Sweet Dreams Ceramic Kettle. This manual provides important information for the safe and efficient use of your appliance. Please read these instructions carefully before first use and keep them for future reference.
Mkpachapụ anya nchekwa dị mkpa:
- Always ensure the kettle is placed on a stable, flat, heat-resistant surface.
- Do not immerse the kettle or its base in water or any other liquid.
- Debe ngwa ngwa ka ụmụaka ghara iru.
- Do not operate the kettle if it is damaged or malfunctioning. Contact customer support.
- Avoid touching hot surfaces. Use the heat-insulated handle.
- Gbaa mbọ hụ na emechiela mkpuchi ahụ tupu ọ rụọ ọrụ.
- Do not fill above the maximum water level indicator to prevent boiling water from overflowing.
- The kettle features automatic shut-off and boil-dry protection for safety.
Melite
- Iwepu: Carefully remove the kettle and its base from the packaging. Retain packaging for storage or disposal.
- Nkwanye: Place the power base on a dry, flat, and stable surface, away from the edge of the countertop. Ensure the power cord is not dangling.
- Iji ihicha nke mbụ: Before first use, fill the kettle with clean water up to the maximum level. Boil the water, then discard it. Repeat this process two to three times to remove any manufacturing residues.
Image: The Bestron Sweet Dreams Ceramic Kettle on its 360-degree swivel power base, illustrating the rotational capability.
Ntuziaka ọrụ
- Na-ejuputa Kettle: Remove the kettle from its base and open the lid. Fill the kettle with the desired amount of fresh water. Do not fill below the minimum mark or above the maximum 0.8L level indicator. Close the lid securely.
- Ịtụkwasị na ntọala: Place the filled kettle firmly onto its 360° swivel power base.
- Njikọ ike: Plug the power cord into a suitable wall socket. The cord storage system on the base helps manage excess cable length (cable length: 79 cm).
- Na-agbanye: Press the ON/OFF switch located on the kettle. An indicator light will illuminate, signifying that the kettle is heating.
- Boiling Process: The water will quickly heat to 100°C. The kettle will automatically switch off once the water has boiled. The indicator light will turn off.
- Na-awụ: Carefully lift the kettle from its base using the heat-insulated handle and pour the hot water. Always pour slowly and carefully to avoid splashes.
- Esi esi ọzọ: If you need to re-boil water, wait a few moments for the automatic switch to reset before pressing the ON/OFF switch again.
Image: The Bestron Sweet Dreams Ceramic Kettle shown in a usage scenario, alongside a cup of tea, highlighting its aesthetic design.
Nlekọta na nhicha
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Bestron kettle.
Na-ehicha Mpụga:
- Na-ewepu ketulu mgbe niile ma hapụ ya ka ọ dị jụụ kpamkpam tupu ihicha ya.
- Wipe the exterior of the kettle and the power base with a soft, damp akwa .
- Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the ceramic surface.
Ebelata:
Limescale can build up inside the kettle, especially in hard water areas, affecting performance and taste. The integrated heating element is resistant to limescale accumulation, but periodic descaling is still recommended.
- Jupụta ketulu ahụ na ngwakọta mmiri na mmanya ọcha (dịka ọmụmaatụ, otu akụkụ mmanya vinega ruo akụkụ abụọ nke mmiri) ma ọ bụ ihe ngwọta maka iwepụ ihe mkpofu dịka ntuziaka ngwaahịa si dị.
- Sie ngwakọta ahụ ma hapụ ya ka ọ dịgide ruo opekata mpe nkeji iri atọ, ma ọ bụ karịa maka oke ibu.
- Empty the kettle and rinse thoroughly with fresh water several times to remove any vinegar residue or descaling solution.
- Ọ bụrụ na ọ dị mkpa, megharịa usoro ahụ.
Nchọpụta nsogbu
| Nsogbu | Ihe nwere ike ime | Ngwọta |
|---|---|---|
| Kettle anaghị agbanwuo. | Ekwunyeghị gị, nye gị iketage, kettle not properly seated on base, switch not pressed. | Check power connection. Ensure kettle is correctly placed on the base. Press the ON/OFF switch firmly. Check household fuse/circuit breaker. |
| Mmiri anaghị esi. | Insufficient water, lid not closed, faulty heating element. | Ensure water level is above minimum. Close the lid securely. If problem persists, contact customer support. |
| Kettle na-agbanyụ ngwa ngwa. | Limescale buildup, boil-dry protection activated. | Descale the kettle. Ensure there is sufficient water before boiling. |
| Unusual taste in water. | New appliance residue, limescale buildup. | Perform first-use cleaning steps again. Descale the kettle. |
Nkọwapụta
- Ụdị: DTP800SD
- Akara: Bestron
- Ike: 0.8 lita
- Ike: Approximately 1785 Watts
- Ihe: Ceramic / Metal (Copper heating element)
- Agba: Ọcha
- Akụkụ (LxWxH): 23.5 x 16 x 19 cm
- Arọ: 1.36 n'arọ
- Atụmatụ pụrụ iche: Insulated heating element, Boil-dry protection, Automatic shut-off, Cordless jug, 360° swivel base, Cord storage.
Akwụkwọ ikike na nkwado
Your Bestron Sweet Dreams Ceramic Kettle DTP800SD comes with a 5-afọ akwụkwọ ikike, ensuring quality and reliability. This warranty covers manufacturing defects under normal household use.
For warranty claims, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official Bestron website. Please have your model number (DTP800SD) and proof of purchase ready when contacting support.
