Okwu mmalite
Thank you for choosing the Satco S3013 G40 Incandescent Light Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new light bulb. Please read these instructions carefully before use and retain them for future reference.
Ozi nchekwa
Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, or injury to persons.
- Ịdọ aka ná ntị: Turn off power to the fixture and allow the bulb to cool before replacing.
- Do not use with dimmers unless specifically stated as dimmable. This bulb is dimmable.
- Ejila n'ime ihe eji emechi emechi kpamkpam n'ihi na nke a nwere ike belata ndụ bọlbụ.
- Do not touch the bulb with bare hands during operation or immediately after turning off, as it can become very hot.
- Gbaa mbọ hụ na agbabanyere bọlbụ ahụ nke ọma na oghere.
- This bulb is designed for 120 Volt applications only.
Ngwaahịa gafereview
The Satco S3013 is a 100-watt G40 incandescent light bulb featuring a clear finish and a medium (E26) base. It provides 1150 lumens of warm white light at 2700K CCT and is fully dimmable.

Image: Satco S3013 G40 Incandescent Light Bulb. This image displays the clear, globe-shaped bulb with its medium screw base, ready for installation.
Akụkụ ndị bụ isi:
- Wattage: 100 Watt
- Voltage: 120 volts
- Ụdị: G40 Globe
- Ntọala: Ọkara (E26)
- Mmepụta ọkụ: 1150 Lumen
- Okpomọkụ agba: 2700K (Ọcha na-ekpo ọkụ)
- Enwere ike ibelata: Ee
- Mechaa: Kpochapụ
Ntọala na nwụnye
- Gbanyụọ: Before attempting any installation, ensure the power to the light fixture is turned off at the circuit breaker or wall switch.
- Nyochaa ihe ndozi: Verify that the light fixture is compatible with a medium (E26) base bulb and can safely handle a 100-watt incandescent bulb.
- Unpack Bulb: Carefully remove the Satco S3013 bulb from its packaging. Avoid touching the glass with bare hands if possible, as oils can reduce bulb life.
- Wụnye bọlbụ: Gently screw the bulb clockwise into the light fixture's socket until it is snug. Do not overtighten.
- Weghachi ike: Ozugbo etinyere bọlbụ ahụ nke ọma, weghachi ike na nrụnye ahụ.
Ntuziaka ọrụ
This incandescent bulb operates like a standard light bulb. Simply turn on the light fixture's switch to illuminate the bulb.
Ọrụ na-ebelata:
The Satco S3013 bulb is fully dimmable. If your fixture is connected to a compatible dimmer switch, you can adjust the light output by operating the dimmer control. Ensure your dimmer switch is rated for incandescent loads and is compatible with the bulb's wattage.
Nlekọta
Incandescent bulbs generally require minimal maintenance. Follow these guidelines for optimal performance and safety:
- Nhicha: Gbaa mbọ hụ na agbanyụrụ ọkụ na bọlbụ ahụ dị jụụ tupu ihicha ya. Jiri akwa dị nro hichaa bọlbụ ahụ. Ejila ihe na-ehicha mmiri mmiri ma ọ bụ ihe abrasive.
- Ndochi: When the bulb reaches the end of its life (approximately 4000 hours), replace it following the "Setup and Installation" steps. Always ensure the power is off and the bulb is cool before removal.
- mkpofu: Dispose of used incandescent bulbs according to local regulations.
Nchọpụta nsogbu
If your Satco S3013 light bulb is not functioning as expected, consider the following common issues:
- Igwe ọkụ anaghị agba ọkụ:
- Check if the power to the fixture is on.
- Gbaa mbọ hụ na agbachiela bọlbụ ahụ nke ọma.
- Chọpụta na ihe nbibi sekit emebibeghị.
- Test the bulb in another working fixture to confirm if the bulb or fixture is faulty.
- The bulb may have reached the end of its operational life and needs replacement.
- Bulb flickers:
- Gbaa mbọ hụ na agbachiela bọlbụ ahụ nke ọma.
- Check for loose wiring in the fixture or switch (consult a qualified electrician if unsure).
- If using a dimmer, ensure it is compatible and properly installed.
Nkọwapụta
| Njirimara | Uru |
|---|---|
| Nọmba nlereanya | S3013 |
| Ụdị | Satco |
| Ụdị ọkụ | Incandescent |
| Wattage | 100 Watt |
| Voltage | 120 volts |
| Nha Ụdị Bọlbụ | G40 |
| Isi Bulb | Ọkara (E26) |
| Lumens | 1150 Lumen |
| Okpomọkụ agba (CCT) | 2700K (Ọcha na-ekpo ọkụ) |
| Ndekọ ngosi agba (CRI) | 100 |
| Enwere ike ibelata | Ee |
| Mechaa | Kpochapụ |
| Nkezi elekere | Awa 4000 |
| Beam Mgbasa | 360° |
| Akụkụ ngwaahịa | 4.9"W x 5.7"H |
Akwụkwọ ikike na nkwado
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Satco websaịtị. Debe ihe akaebe nke ịzụrụ maka akwụkwọ ikike.
Onye nrụpụta: Satco
Websaịtị: www.satco.com (Ọpụample njikọ, ezigbo njikọ nwere ike ịdị iche)





