OSD Audio TSM-T9 Dual Arm Desk Mount User Manual

1. Okwu mmalite na gafereview

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your OSD Audio TSM-T9 Dual Arm Desk Mount. This heavy-duty mount is designed to securely hold two LCD monitors ranging from 13 inches to 23 inches, enhancing your workspace ergonomics and organization.

The TSM-T9 features a robust black anodized aluminum construction, offering durability and stability. It supports monitors with a maximum weight of 15 kg (33 lbs) per monitor and is VESA compliant with 75x75mm and 100x100mm patterns. The mount allows for flexible adjustments including tilt (+60°/-60°), 180° swivel, and 360° rotation, enabling optimal viewing angles. Integrated cable management helps maintain a tidy desk environment.

Figure 1: OSD Audio TSM-T9 Dual Arm Desk Mount

This image displays the complete OSD Audio TSM-T9 dual arm desk mount, showcasing its central pole, two articulating arms, and VESA mounting plates. The black anodized aluminum finish is visible, highlighting the sturdy construction designed for two monitors.

2. Ozi nchekwa

• Ike ibu: Do not exceed the maximum weight capacity of 15 kg (33 lbs) per monitor. Exceeding this limit can result in instability, property damage, or personal injury.
• Nha nleba anya: This mount is designed for monitors between 13 and 23 inches. Using monitors outside this range may compromise stability and functionality.
• Ọkpụrụkpụ oche: Ensure your desk surface is strong enough to support the combined weight of the mount and two monitors. The desk clamp requires a stable and appropriate thickness.
• Mgbakọ: Follow all assembly instructions carefully. Improper installation can lead to serious injury. If you are unsure about any part of the installation, seek professional assistance.
• Ntụtuo: Be aware of potential pinch points during assembly and adjustment of the arms. Keep hands and fingers clear of moving parts.
• Njikwa USB: Route cables carefully to prevent snagging or damage, which could lead to monitors falling or electrical hazards.
• Atụmatụ ịdọ aka ná ntị 65: Ngwaahịa a nwere ike ịnwe kemịkalụ mara steeti California na-ebute ọrịa kansa na ntụpọ ọmụmụ ma ọ bụ mmerụ ahụ ọmụmụ ọzọ. Saa aka ma emechaa.

3. Ihe ngwugwu

Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact OSD Audio customer support.

• Isi Nkwado Ogidi
• Ogige Clamp Assembly (Base, Clamp Plate, Tightening Knob/Screws)
• Dual Articulating Monitor Arms (2 units)
• Efere VESA maka ịkwanye (nkeji abụọ)
• Hardware Kit (various screws, washers, spacers for VESA mounting)
• Hex Keys / Allen Wrenches (for assembly and adjustments)
• Cable Management Clips (if included)

4. Nkọwapụta

Foto nke 2: Nkọwapụta na Atụmatụ Ndị Dị Mkpa

This image illustrates the OSD Audio TSM-T9 mount with callouts for key specifications, including monitor size compatibility (13"-23"), maximum weight capacity (15kg/33lbs per monitor), and a profile view showing maximum height (440mm / 17.32").

Figure 3: Detailed Dimensions and Adjustment Ranges

This image provides a technical drawing of the OSD Audio TSM-T9, detailing various dimensions in millimeters and inches, including arm length (180mm / 7.08"), pole height (450mm / 17.71"), and VESA plate dimensions (100mm / 3.93"). It also visually represents the swivel (180°), tilt (+60°/-60°), and rotation (360°) capabilities, along with VESA compatibility (75x75, 100x100).

5. Nhazi ntuziaka

Before you begin, ensure you have a clear workspace and all package contents are accounted for. Two people are recommended for safely mounting monitors.

1. Attach Desk Clamp to Pole:

   Chekwaa oche clamp base to the bottom of the main support pole using the provided screws. Ensure it is tightened firmly.

2. Mount Pole to Desk:

   Position the assembled pole and clamp on your desk. Adjust the clamp plate and tighten the knob/screws until the pole is securely fastened to the desk surface. Ensure the mount is stable and does not wobble.
3. Tinye ogwe aka ndị na-ejikọta ọnụ:

   Slide the two articulating monitor arms onto the main support pole. Adjust their height to your desired position and secure them using the set screws on the arm collars with the provided hex key. Ensure they are level and firmly attached.

4. Tinye efere VESA na ihe nlele:

   Carefully place your monitor face down on a soft, clean surface. Align the VESA mounting plate with the screw holes on the back of your monitor (either 75x75mm or 100x100mm pattern). Use the appropriate screws and washers from the hardware kit to secure the plate to the monitor. Do not overtighten.

5. Ịwụnye ihe nlele gaa na ogwe aka:

   With assistance, carefully lift each monitor and slide its VESA plate onto the corresponding arm's mounting head. Ensure the monitor clicks into place or is secured with any provided locking mechanism. Double-check that both monitors are securely attached before releasing ha.
6. Njikwa USB:

   Route your monitor power and video cables through the integrated cable management clips or channels on the arms and pole. This helps to keep your workspace tidy and prevents cable damage.

Figure 4: Technical Diagram for Assembly Reference

This line drawing provides a clear, simplified view of the OSD Audio TSM-T9 mount, illustrating the main components and their relative positions, useful for assembly. It includes key measurements and indicates the range of motion for tilt, swivel, and rotation.

6. Ntuziaka ọrụ

Once your monitors are securely mounted, you can adjust their position to achieve optimal ergonomic viewing.

• Ndozi elu: To adjust the height of the monitors, loosen the set screws on the arm collars on the main pole, slide the arms to the desired height, and re-tighten the screws firmly.
• Ndozi Tilt: The monitor can be tilted up or down by grasping the top and bottom edges of the monitor and gently adjusting it to the desired angle (+60° to -60°).
• Ndozi Swivel: The monitor arms can swivel 180° horizontally around the main pole. The VESA plate also allows for 180° swivel.
• Ndozigharị ntụgharị: You can rotate your monitor 360° to switch between landscape and portrait orientations. Simply grasp the monitor and turn it.
• Arm Extension/Retraction: The articulating arms allow you to extend or retract your monitors closer or further from you.

Always make adjustments smoothly and ensure all screws are tightened after repositioning to maintain stability.

7. Nlekọta

• Nhicha: Clean the mount with a soft, damp akwa . Zere ihe nhicha ma ọ bụ ihe mgbaze nke nwere ike imebi njedebe.
• Nyocha oge: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or frequent adjustments can cause fasteners to loosen.
• mmanu mmanu: No lubrication is typically required for this type of mount. If any joints become stiff, consult OSD Audio customer support.

8. Nchọpụta nsogbu

9. Akwụkwọ ikike na nkwado

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official OSD Audio websaịtị. Debe nnata nzụta gị dị ka ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.

Onye nrụpụta: OSD Audio

For further assistance, please contact OSD Audio customer service directly.