Progress Lighting P2928-20 Heart Bath & Vanity Instruction Manual

1. Ngwaahịa gafereview

The Progress Lighting P2928-20 Heart Bath & Vanity fixture is designed to provide pleasing illumination in bathrooms and vanity areas. This fixture features a smart, simple design with etched glass shades that add distinction. Its versatile design allows for installation with the light shades facing either upwards or downwards, adapting to various aesthetic preferences and lighting needs.

Atụmatụ gụnyere:

• Etched glass shades for diffused light.
• Durable alloy steel construction with an Antique Bronze finish.
• Designed for indoor use in bathroom settings.
• Can be mounted with lights facing up or down.

Figure 1: Progress Lighting P2928-20 Heart Bath & Vanity fixture in Antique Bronze. This image displays the fixture with its four light sources and etched glass shades, suitable for bathroom and vanity applications.

2. Ozi nchekwa

Before beginning installation, carefully read and understand all instructions. Failure to follow these instructions may result in electric shock, fire, or other hazards that can cause injury or property damage.

• Ịdọ aka ná ntị: Ngwaahịa a nwere ike ikpughe gị na kemịkalụ gụnyere lead, nke steeti California mara na ọ na-ebute ọrịa kansa na nkwarụ ọmụmụ ma ọ bụ mmerụ ahụ ọmụmụ ọzọ. Maka ozi ndị ọzọ gaa na www.P65Warnings.ca.gov.
• Always disconnect power at the main circuit breaker or fuse box before installing or servicing the fixture.
• Ensure all electrical connections comply with local codes, ordinances, and the National Electric Code (NEC).
• Ọ bụrụ na ịmaghị gbasara waya, kpọtụrụ onye na-ahụ maka ọkụ eletrik.
• Agafela oke wattage specified for the bulbs (100 watts per bulb, 120 Volts total).
• Emebere ihe ndozi a maka naanị ime ụlọ.

3. Ihe ngwugwu

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact customer service for assistance.

• Vanity Light Fixture (Model P2928-20)
• Etched Glass Shades (4 pieces)
• Mounting Hardware Kit (includes screws, wire nuts, mounting plate)
• Nwụnye Mpempe akwụkwọ

4. Ntọala na nwụnye

This fixture is designed for flush mount installation. It can be installed with the light shades facing either upwards or downwards, depending on your preference and lighting requirements. Refer to the included Installation Sheet for detailed, step-by-step instructions and diagrams specific to your model.

1. Kwadebe maka nwụnye: Turn off power at the circuit breaker. Remove the old fixture if applicable.
2. Nwụnye efere: Secure the mounting plate to the junction box using the provided screws. Ensure it is firmly attached.
3. Wiring: Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
4. Mgbakwunye ihe nrụnye: Jiri nlezianya hazie ihe nkwụnye ahụ na efere nrụnye ahụ ma jiri skru ndị enyere ya mechie ya.
5. Nwụnye ndò na bọlbụ: Install the etched glass shades onto the fixture. Insert four incandescent bulbs (E26 base, max 100 watts each) into the sockets.
6. Weghachi ike: Gbanyụọ ọkụ azụ na ihe nbibi sekit.

Figure 2: Dimensional drawing of the P2928-20 fixture. This diagram provides key measurements for planning installation space.

Figure 3: The P2928-20 fixture installed with shades oriented upwards. The fixture can be mounted in either an up or down position.

5. Ntuziaka ọrụ

The Progress Lighting P2928-20 fixture operates via a standard wall switch (toggle switch type). Once installed and wired correctly, simply use the wall switch connected to the fixture to turn the lights on or off.

Note: While some Progress Lighting products may support app control, this specific model (P2928-20) primarily functions with a standard wall switch. Refer to the product's packaging or the included installation sheet for any specific smart home integration capabilities if applicable.

6. Nlekọta

Regular cleaning and maintenance will help preserve the appearance and functionality of your fixture.

• Nhicha: Turn off the power and allow the fixture to cool before cleaning. Wipe the metal parts with a soft, dry cloth. For the glass shades, use a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass.
• Ndokwa bọlbụ: Ensure power is off before replacing bulbs. Allow old bulbs to cool. Use only E26 base incandescent bulbs, not exceeding 100 watts per socket.
• Nyocha: Periodically check for loose wiring or damaged components. If any issues are found, disconnect power and consult a qualified electrician.

7. Nchọpụta nsogbu

If you encounter issues with your fixture, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.

8. Nkọwapụta

9. Akwụkwọ ikike na nkwado

Progress Lighting provides a Akwụkwọ ikike dị afọ 1 for this product. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support. For warranty claims or technical assistance, please contact Progress Lighting customer service.

For further information or to explore other products, visit the official Progress Lighting store: Progress Lighting Store on Amazon.

10. Official Product Videos

No official product videos from the seller were found to be relevant for inclusion in this instruction manual based on the provided data.