Beurer PM16 Female Heart Rate Monitor User Manual

Okwu mmalite

Thank you for choosing the Beurer PM16 Female Heart Rate Monitor. This device is designed for ECG-accurate heart rate monitoring directly on the finger, making it ideal for activities such as walking or hiking where continuous pulse measurement is not always required. Please read this manual carefully to ensure safe and correct operation of your device.

Melite

1. Ntinye batrị

The Beurer PM16 typically uses a standard button cell battery. To install or replace the battery:

1. Chọta mkpuchi nke batrị n'azụ ngwaọrụ.
2. Use a small coin or screwdriver to carefully open the battery compartment.
3. Insert the new battery with the positive (+) side facing upwards.
4. Mechie mkpuchi nke batrị batrị nke ọma.

2. Ntọala mbụ

Upon first use or after battery replacement, you may need to set the time and date. Refer to the on-screen prompts or the device's buttons to navigate through the settings menu. Typically, buttons are used to adjust values and confirm selections.

Foto: The Beurer PM16 Heart Rate Monitor. This image displays the compact design of the monitor, featuring a digital display and the integrated finger sensor for heart rate measurement. The device is shown from a slight angle, highlighting its ergonomic shape.

Na-arụ ọrụ ngwaọrụ

1. Heart Rate Measurement

The Beurer PM16 uses an ECG-accurate finger sensor for heart rate measurement.

1. Gbaa mbọ hụ na mkpịsị aka gị dị ọcha ma kpọọ nkụ.
2. Place your index finger firmly on the designated sensor area.
3. Nọrọ jụụ ma zere ikwu okwu n'oge nha.
4. Your heart rate will be displayed on the screen after a few seconds.

Mara: For best results, ensure good contact between your finger and the sensor. Cold fingers or excessive movement can affect accuracy.

2. Ọrụ elekere elekere

The device includes a stopwatch function for timing your activities.

1. Navigate to the stopwatch mode using the device's buttons.
2. Press the start button to begin timing.
3. Press the stop button to pause or end the timing.
4. Press the reset button to clear the stopwatch.

3. Time of Day Display

The Beurer PM16 also functions as a watch, displaying the current time of day. This is typically the default display mode when not actively measuring heart rate or using other functions.

Nlekọta

1. Nhicha

Iji hụ na ogologo ndụ na ịdị ọcha nke ngwaọrụ gị:

• Wipe the device regularly with a soft, slightly damp akwa .
• Ejila ihe nhicha abrasive ma ọ bụ ihe mgbaze.
• Ensure the finger sensor area is kept clean for accurate readings.

2. Nchekwa

When not in use, store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If the device will not be used for an extended period, it is recommended to remove the battery to prevent leakage.

Nchọpụta nsogbu

• No display / Device not turning on: Check if the battery is correctly inserted and has sufficient charge. Replace the battery if necessary.
• Ọgụgụ obi na-ezighi ezi: Ensure your finger is clean, dry, and making firm contact with the sensor. Avoid movement during measurement. Cold fingers can affect readings; warm your hands before use.
• Display shows error message: Refer to the specific error code in the full product manual (if available) or try resetting the device by removing and reinserting the battery.

Nkọwapụta

Akwụkwọ ikike

Beurer products are manufactured to the highest quality standards. For detailed information regarding the warranty period and conditions for your Beurer PM16 Heart Rate Monitor, please refer to the warranty card included with your purchase or visit the official Beurer websaịtị. Debe ihe akaebe nke ịzụrụ ihe maka akwụkwọ ikike ọ bụla.

Nkwado ndị ahịa

Should you have any questions, encounter issues not covered in this manual, or require technical assistance, please contact Beurer customer support. Contact details can typically be found on the official Beurer websaịtị ma ọ bụ na nkwakọ ngwaahịa.

Vidiyo ngwaahịa ngwaahịa

Ọ nweghị vidiyo ngwaahịa sitere n'aka onye na-ere ahịa dị maka itinye n'akwụkwọ ntuziaka a.