Graco FFT210 RAC X Reversible Tip Instruction Manual

1. Okwu mmalite

The Graco FFT210 RAC X Reversible Tip is designed for use with airless paint spray guns. This tip is engineered to provide a long service life, a superior fan pattern, and a high-quality finish for various painting applications. Its reversible design facilitates easy clearing of clogs, enhancing productivity.

Image of the Graco FFT210 RAC X Reversible Tip. The tip features a green plastic housing with "FFT 210" embossed on it, indicating its model and fan size. The Graco 'G' logo is visible on the stem. The lower part of the tip is a silver metallic component, designed for secure attachment to a spray gun guard.

2. Ozi nchekwa

Observe the following safety precautions when using the Graco FFT210 RAC X Reversible Tip:

• Do not spray near face or eyes. Always wear appropriate personal protective equipment, including eye protection.
• Use in a well-ventilated area to prevent inhalation of paint fumes.
• Do not puncture or burn the container of paint or solvents.
• Store the tip and associated materials in a cool, dry place.
• Debe ebe ụmụaka na-apụghị iru.
• Always relieve pressure from the airless spray system before installing, removing, or cleaning the tip.

3. Ntọala na nwụnye

Proper installation of the RAC X Reversible Tip is crucial for optimal performance and safety.

1. Ensure System is Depressurized: Before handling the spray gun or tip, ensure the airless spray system is completely depressurized according to your spray gun's manual.
2. Insert OneSeal: The RAC X SwitchTips include an exclusive OneSeal. Ensure this seal is correctly seated in the tip base. No tools are required for this step.
3. Install Tip into Guard: Insert the FFT210 tip into a compatible Graco RAC X spray gun guard. The superior locking tab design ensures the tip remains securely in place during operation.
4. Secure Guard: Attach the spray gun guard, with the tip installed, onto the airless spray gun. Hand-tighten securely.
5. Nyochaa ndakọrịta: Confirm that the FFT210 tip is compatible with your specific airless spray gun model and guard. Refer to your spray gun's manual for compatibility details.

4. Ntuziaka ọrụ

The FFT210 tip is designed for specific applications to achieve a fine finish.

• Tip Designation: The "FFT210" designation indicates a Fine Finish Tip (FFT) with a 4-inch fan width (when sprayed from 12 inches away) and a 0.010-inch orifice diameter. The '2' in '210' refers to a 4-inch fan, and the '10' refers to a 0.010-inch orifice.
• Fan Pattern: This tip produces a 4-inch fan pattern (at 12 inches from the surface) with a 0.010-inch orifice, ideal for precise applications and achieving a smooth finish on smaller surfaces or detailed work.
• Ngwa: Suitable for spraying thin materials such as stains, lacquers, and fine finish paints.
• Usoro ịgbasa: Maintain a consistent distance and speed while spraying to ensure an even coat. The wider spray fan allows for fewer passes, potentially increasing arụpụtaghị ihe.
• Reversible Feature: If the tip becomes clogged during operation, rotate the tip 180 degrees to the "unclog" position, spray briefly to clear the obstruction, then rotate it back to the "spray" position. Always point the gun away from yourself and others when clearing clogs.

5. Nlekọta na nhicha

Regular cleaning and maintenance extend the life of your RAC X Reversible Tip.

1. Sistemụ ịda mbà n'obi: Always depressurize the airless spray system before performing any maintenance.
2. Remove Tip: Remove the spray gun guard and then carefully remove the FFT210 tip.
3. Sachaa nke ọma: Clean the tip and the OneSeal immediately after each use with an appropriate cleaning solution (water for latex paints, mineral spirits for oil-based paints). Use a soft brush to remove paint residue.
4. Nyochaa maka eyi: Regularly inspect the tip orifice for wear. A worn tip will produce a poor spray pattern and reduce efficiency. Replace worn tips promptly.
5. Nchekwa: Store the clean tip in a tip saver fluid or submerged in an appropriate solvent to prevent drying and clogging.

6. Nchọpụta nsogbu

Common issues and their solutions for the Graco FFT210 RAC X Reversible Tip.

• Poor Spray Pattern / Streaking:
  • Ihe kpatara: Clogged tip orifice or worn tip.
  • Ngwọta: Reverse the tip to clear clogs. If the problem persists, clean the tip thoroughly. If the tip is worn, replace it.
• Tip Not Fitting Guard:
  • Ihe kpatara: Incompatible spray gun guard or incorrect tip series.
  • Ngwọta: Ensure you are using a Graco RAC X guard, which is specifically designed for this tip series. Verify compatibility with your spray gun model.
• Paint Leaking Around Tip:
  • Ihe kpatara: Damaged or improperly seated OneSeal, or loose guard.
  • Ngwọta: Inspect the OneSeal for damage and ensure it is correctly seated. Tighten the spray gun guard securely.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

For warranty information, technical support, or to purchase replacement parts, please contact Graco customer service or visit the official Graco website. Specific warranty terms may vary by region and product.

Ị nwere ike ịchọta ozi ndị ọzọ na nkwado na Graco Store on Amazon.