Monoprice 24-Port Keystone Jack Panel (Model 107260)

1. N'eluview

The Monoprice 24-Port Keystone Jack Panel is designed to fit into a standard 19-inch wide equipment rack, occupying 1U (1.75 inches) of vertical space. This panel accommodates up to 24 individual keystone jacks, allowing for the creation of a customized patch panel for various network, audio, and video connections. Constructed from black painted steel, each port on the panel is individually numbered for easy identification and organization.

Foto 1: N'ihu view of the Monoprice 24-Port Keystone Jack Panel, showing 24 numbered ports.

2. Atụmatụ igodo

• 24 Individual Keystone Ports: Na-enye ample capacity for diverse connectivity needs.
• Black Painted Steel Panel: Ensures durability and a professional appearance.
• Numbered Ports: Facilitates easy identification and cable management.
• Standard 1U Rackmount Design: Compatible with standard 19-inch equipment racks.

Figure 2: Visual representation of the key features of a 24-port keystone panel.

3. Ntọala na nwụnye

This section outlines the steps for installing keystone jacks into the panel and mounting the panel into an equipment rack.

3.1 Installing Keystone Jacks

1. Select the appropriate keystone jacks (e.g., RJ45, HDMI, Coax) for your specific connectivity requirements.
2. Orient the keystone jack and align it with an empty port on the front of the panel.
3. Gently push the keystone jack into the port until it clicks securely into place. Ensure it is flush with the panel surface.
4. Repeat for all desired keystone jacks.

3.2 Ịtinye panel ahụ

1. Identify the desired 1U space in your standard 19-inch equipment rack.
2. Align the mounting holes on the sides of the keystone panel with the corresponding holes on the rack rails.
3. Secure the panel to the rack using appropriate rack screws and cage nuts (not included with the panel). Tighten the screws to ensure a stable installation.

4. Ntuziaka ọrụ

Once the keystone jacks are installed and the panel is mounted, connect your network or media cables to the front of the keystone jacks. The numbered ports assist in organizing and identifying connections. For permanent installations, route cables neatly to the rear of the panel and connect them to the back of the keystone jacks as per the jack's specific instructions.

5. Nlekọta

The Monoprice Keystone Jack Panel requires minimal maintenance. Periodically inspect all connections for tightness and ensure cables are not under excessive strain. Clean the panel surface with a soft, dry cloth as needed. Avoid using abrasive cleaners or solvents.

6. Nchọpụta nsogbu

If you experience connectivity issues, consider the following:

• No Signal/Intermittent Connection: Check that all cables are securely plugged into both the keystone jacks on the panel and the connected devices. Ensure the keystone jacks themselves are fully seated in the panel.
• Njikọ na-ezighi ezi: Verify that cables are connected to the correct numbered ports as intended for your network layout.
• Damaged Cables/Jacks: Inspect cables and keystone jacks for any visible damage. Replace any faulty components.

7. Nkọwapụta

8. Akwụkwọ ikike na nkwado

Specific warranty information and detailed support contacts are not available in the provided product data. Please refer to the official Monoprice website or your product packaging for the most current warranty terms and customer support options.