TC-Helicon VOICETONE E1 Vocal Echo Stompbox Instruction Manual

1. Okwu mmalite

The TC-Helicon VOICETONE E1 is a compact, single-button stompbox designed to add a range of vocal echo effects, from vintage slapback to modern delays. This manual provides essential information for proper setup, operation, and maintenance of your device.

Foto 1: N'ihu view of the TC-Helicon VOICETONE E1 pedal, showcasing its controls and footswitch.

2. Nhazi

2.1 Nwepu

Carefully remove the VOICETONE E1 from its packaging. Ensure all components are present: the VOICETONE E1 unit and the power supply. Inspect the unit for any signs of damage during transit.

2.2 Njikọ ike

Connect the included 12V DC power adapter to the 'POWER' input on the rear of the VOICETONE E1.
Plug the power adapter into a suitable electrical outlet. The 'POWER' LED on the front panel will illuminate when the unit receives power.

2.3 Njikọ ọdịyo

The VOICETONE E1 connects between your microphone and your mixer or audio interface.

N'azụ view of TC-Helicon VOICETONE E1 showing Mic, Out, and Power ports

Foto 2: Rear panel connections including Mic input, Out output, and Power input.

Connect your microphone to the 'MIC' input (XLR) on the rear of the VOICETONE E1 using a standard XLR cable.
Connect the 'OUT' output (XLR) on the rear of the VOICETONE E1 to an available input on your mixer or audio interface using another XLR cable.
Ensure phantom power is supplied by your mixer/interface if you are using a condenser microphone. The VOICETONE E1 passes phantom power through to the microphone.

3. Operating the VOICETONE E1

3.1 Na-achịkwaview

The VOICETONE E1 features intuitive controls for shaping your vocal echo effects.

TC-Helicon VOICETONE E1 with numbered controls

Foto 3: Numbered controls of the VOICETONE E1.

1. FX Knob: Selects the echo type and adjusts its intensity. Rotate to choose between various echo styles, from slapback to longer delays.
2. Feedback Knob: Controls the number of echo repeats. Higher settings result in more repeats.
3. Dry/Wet Knob: Adjusts the balance between your unprocessed (dry) vocal signal and the echo effect (wet). Turn clockwise for more effect.
4. Ihe mgbakwasị ụkwụ: Toggles the echo effect on/off. Hold down for tap tempo functionality.
Analog Button: Engages an analog-style echo emulation for a warmer, more vintage ụda.

3.2 Basic Arụmọrụ

Gbanwuo: Ensure all connections are secure and power is supplied. The unit is ready when the power LED is lit.
Engage Effect: Press the footswitch to activate the echo effect. The effect LED will illuminate. Press again to bypass the effect.
Select Echo Type: Tugharia ihe FX knob to explore different echo styles. Start with subtle settings and adjust to taste.
Adjust Repeats: Jiri ihe Nzaghachi knob to control how many times the echo repeats.
Ọkwa Ngwakọta: Hazie nke Akọrọ/mmiri knob to blend the echo effect with your dry vocal.
Ụdị analog: Pịa Analọg button to toggle between digital and analog-style echo.

3.3 Tap Tempo

The VOICETONE E1 features a tap tempo function to synchronize your echo repeats with the tempo of your music.

Foot tapping the VOICETONE E1 footswitch

Foto 4: Demonstrating the tap tempo function by tapping the footswitch.

To set the tempo, hold down the footswitch for approximately one second until the effect LED starts blinking.
Tap the footswitch two or more times in rhythm with your desired tempo. The echo repeats will synchronize to your taps.
The tap tempo feature is particularly useful for live performances to keep effects in time with the music.

3.4 Mic-Control Feature

The VOICETONE E1 supports TC-Helicon's Mic-Control feature, allowing remote on/off switching of the effect using a compatible TC-Helicon MP-75 microphone.

Foto 5: A close-up of a microphone, illustrating the Mic-Control capability with compatible microphones.

If using an MP-75 microphone, connect it to the 'MIC' input.
Press the button on the MP-75 microphone to toggle the echo effect on or off without needing to use the footswitch on the pedal.

4. Nlekọta

4.1 Nhicha

Kwupu ike tupu ihicha.
Jiri akwa dị nro ma kpọọ nkụ hichaa mpụta nke otu ahụ.
Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.

4.2 Nchekwa

Store the VOICETONE E1 in a dry environment, away from extreme temperatures and direct sunlight.
If storing for extended periods, disconnect the power supply and consider placing the unit in its original packaging or a protective case.

5. Nchọpụta nsogbu

Nsogbu	Ihe nwere ike ime	Ngwọta
Enweghị ike	Ejikọtaghị ihe nkwụnye ọkụ ma ọ bụ mejọrọ.	Ensure power adapter is securely connected to the unit and a working outlet. Check adapter for damage.
Enweghị ụda ma ọ bụ mgbaàmà adịghị ike	Incorrect audio connections; microphone or cable issue; mixer input issue.	Verify XLR cables are correctly connected to 'MIC' in and 'OUT'. Test microphone and cables. Check mixer input levels.
Enweghị mmetụta nkwughachi	Effect bypassed; FX knob set to minimum; Dry/Wet knob set to 'Dry'.	Press footswitch to engage effect. Rotate FX knob to select an effect. Adjust Dry/Wet knob towards 'Wet'.
Echo tempo is incorrect	Tap tempo not set or incorrectly tapped.	Re-engage tap tempo by holding the footswitch, then tap accurately to the desired tempo.
Mic-Control not working	Incompatible microphone; microphone cable issue.	Ensure you are using a TC-Helicon MP-75 microphone. Check microphone cable for proper connection.

6. Nkọwapụta

Njirimara	Nkọwa
Nlereanya	VOICETONEE1
Ibu Ibu	15.8 ounces (0.45 Kilogram)
Akụkụ ngwaahịa	6 x 7 x 3.5 sentimita asatọ
Ngwaọrụ Akụrụngwa	USB (for firmware updates)
Ụdị mgbaàmà	Analọg
Voltage	12V DC (Power Adapter)
Ampoge	0.4 ndeamps
Njikọta	XLR Mic Input, XLR Line Output
Njikwa	FX, Feedback, Dry/Wet, Analog button, Footswitch (On/Off, Tap Tempo)

7. Akwụkwọ ikike Ozi

TC-Helicon products are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the official TC-Helicon webma ọ bụ onye na-ekesa ihe n'ógbè gị maka ozi zuru ezu gbasara nkwa na usoro ndebanye aha. Debe ihe akaebe nke ịzụrụ ihe maka nkwupụta nkwa.

8. Nkwado

For further assistance, technical support, or to download the latest firmware updates, please visit the official TC-Helicon websaịtị:

www.tc-helicon.com

You can also contact TC-Helicon customer support directly through their website for personalized assistance.

	TC HELICON VOICETONE C1: Simple 1-Button Vocal Pitch Correction Stompbox Explore the TC HELICON VOICETONE C1, a versatile 1-button stompbox offering flexible pitch correction, HardTune effects, and vocal processing for musicians. Learn about its features, connectivity, and warranty.
	TC-Helicon VoiceTone H1 Vocal Harmony Processor User Manual Comprehensive user manual for the TC-Helicon VoiceTone H1, detailing its features, setup, operation, and technical specifications for creating realistic vocal harmonies. Learn how to use guitar input or key selection for precise harmony control.
	TC Helicon VOICETONE X1 Ntuziaka mmalite ngwa ngwa Ntuziaka mmalite ngwa ngwa maka ihe nrụpụta ụda olu TC Helicon VOICETONE X1, na-akọwa njikwa ya, mkpa nchekwa nchekwa dị mkpa, yana ozi nnabata.
	TC Helicon VoiceLive Play Quick Start Guide: 3-Button Vocal Effects Stompbox with Looping Get started quickly with the TC Helicon VoiceLive Play, a 3-button vocal effects stompbox with looping. This guide covers essential setup, operation, safety instructions, and frequently asked questions for singers and musicians.
	TC HELICON VOICETONE H1: Ọgụgụ isi Vocal Harmony Stompbox Chọgharịa TC HELICON VOICETONE H1, kọmpat, otu bọtịnụ stompbox emebere iji wepụta ezigbo ndakọrịta ụda olu na-achịkwa guitar. Akwụkwọ ozi ngwaahịa a na-akọwapụta ọrụ ya dị mfe, njiri mara dị ka nhụta igodo akpaaka na njikwa nkwekọ aka, ịrụ ọrụ siri ike, yana ike njikọta maka ndị egwu.
	TC Helicon VoiceTone Create XT Bedienungsanleitung Das Benutzerhandbuch für das TC Helicon VoiceTone Create XT, ein professionelles Gesangseffektpedal für Live-Auftritte, das Studioqualitätseffekte und einfache Bedienung bietet. Enthält Anleitungen zur Einrichtung, Bedienung und Fehlerbehebung.